The Toyota RAV4 has a maintenance reminder that can be reset in two different ways. Please adhere to the instructions listed below for your particular car’s trim level.
In this first lesson, I’ll demonstrate how to turn off the maintenance light on a RAV4 with a monochrome screen. So, the following is how to reset it:
- Hold down the DISP button while waiting for the maintenance light to turn off.
- While restarting the ignition, press and hold the DISP button.
- Next, switch the light off.
- Activate the ignition switch without starting the engine.
- By continually pressing the DISP button, navigate to TRIP A.
In This Article...
How do you press the button on a 2016 Toyota Rav4 to turn off the maintenance light?
How to Extinguish the Toyota RAV4’s Maintenance Light
- Put the ignition on with your key. Turn the key to the first position.
- On the dashboard, press the reset trip meter button. Hold it down for a couple of seconds.
- Hold the odometer button down for another five or so seconds.
- Release the odometer button after it is off.
Why does my Rav4 indicate that maintenance is needed?
The significance of the emblem MAINT REQD is significant. The MAINT REQD light indicates when the vehicle’s scheduled maintenance is due when it illuminates. If your car is under two years old, this service can be covered by your ToyotaCare plan.
How can I dim the maintenance is necessary light?
How do I turn the “Maint Reqd” light back on?
- Switch the ignition to the ON position.
- Set the trip display to TRIP A mode on the odometer.
- Activate the OFF position on the ignition switch.
- Turn the ignition switch to the ON position while pressing and holding the Trip Meter RESET button.
- It will do so via the service maintenance reminder light.
Why does my maintenance light come on after I change the oil?
- Turn the key in the ignition while maintaining pressure on the ODO button. till the dash lights turn on. Avoid starting the car.
- If the car is on, turn it off.
- Press and hold the ODO reset / readout button while the engine is off.
- Release the ODO button once it starts to show zeros, then flip the key back to the “off” position.
- The ODO display will briefly flash before beginning to display only zeros.
- Verify that the odometer’s (ODO) total mileage displaytypically the ‘A’ displayis on.
- Now the light will read “MAINT REQD.”
What ‘MAINT REQD’ Means
Within 5000 miles of the last reset, the “MAINT REQD” indicator illuminates. It is merely a mileage counter meant to serve as a reminder to the user that an oil change is required and in no way indicates any system failure. If a specialist has always performed maintenance on your Toyota, they reset it after each oil change. It should be noted that the recommended oil change interval is not always 5000 miles. To find out how frequently the oil in your Camry needs to be changed, consult the owner’s manual and your usual technician.
Need Help?
Our service team would be delighted to assist you. Our entire staff of experts is Toyota-certified and adept in resolving even the most challenging problems with your Toyota. Make an appointment right away!
How do I remove the warning about Toyota maintenance?
Turn your key to the second position after pressing and holding the trip meter reset button on the dashboard. Hold the odometer button down for a total of 10 seconds. The light ought to flash, potentially beep, and then go off as a result. Release the odometer button once it has been turned off, then start the automobile.
How should I respond if my maintenance light illuminates?
How Can the Maintenance Required Light Be Reset?
- Turn on your car. Look at your dashboard when your key is in the on position.
- Press the Trip Meter Reset Button after turning off the engine.
- Re-start the vehicle.
- Keep pressing the reset button.
- Reset button released
Can I drive my automobile even though it needs maintenance?
Simply put, the flashing maintenance required light is alerting you that maintenance on your car is necessary. The indicator will come on when a predetermined period of time has passed since your car’s last service or based on how far you’ve driven it.
This light typically indicates that you should change the oil in your car. The maintenance data will be reset for you when your car has been taken in for service.
To manually reset the system to turn off the light, however, follow these instructions:
When the maintenance light comes on, you can continue to drive, but bear in mind that you are doing so at your own risk if the required or scheduled repair is skipped.
How can I turn my car’s service light back on?
First, turn on the engine. Step 2: The display will say “Service required” if a service is overdue. Locate and press the OK button at the top right of the steering wheel for longer than one second to clear this message. The service interval will be reset to its default value in Step 3.
On a Toyota RAV4, how do you turn off the check engine light?
If the problem or code that caused your Toyota RAV4’s check engine light to come on is resolved, it will typically turn off by itself. For instance, if a loose gas cap was the reason your check engine light came on, the light will automatically switch off once the gas cap is tightened.
What does the phrase “maintenance required” mean?
The mileage is the only factor that activates the maintenance required light, also known as the service required light. When this light turns on, different automakers have varying standards. For instance, the maintenance needed light on a car might turn on once every 10,000 lights and stay lit until it is manually turned off.
The oil change, spark plug replacement, new tire, etc. are just a few examples of the routine maintenance that should be performed on a vehicle.
When servicing your vehicle, mechanics typically reset the maintenance required light. The process for resetting the maintenance required light differs based on the make and type of the car, yet, if they don’t, you can do it yourself.
How can you turn a 2015 Toyota’s maintenance light back on?
If mechanics neglect to reset the maintenance alert after servicing the car, it may become an annoyance. Fortunately, a 2015 Toyota Sienna’s maintenance light is simple to reset.
Simply adhere to these guidelines to restart the light:
- The maintenance is necessary light needs to be reset.
- In addition to pressing and holding the trip odometer button, restart the engine of the car.
- A key is turned to the on position. Alternatively, if your vehicle has a push-button start, you can depress the button twice while keeping your foot off the brake.
- Shut down the van.
- To get the Trip A reading, press the trip odometer button on the instrument cluster.
You obviously care about your automobile if you take such good care of your Sienna. Therefore, make sure your car is fully insured without paying too much. It is quick and simple with the Jerry app.
Jerry is a certified insurance broker who obtains rates from numerous reputable and highly rated auto insurance providers. Jerry can assist you in purchasing insurance and terminating your current policy after you discover a fantastic quote for your 2015 Toyota Sienna. Customers often save close to $900 annually!