How To Reset Maintenance Light Toyota Highlander 2016

1. Switch on the engine (one position before starting engine).

2. Verify the trip meter Readings are displayed. Switch off the ignition. Go to step three.

1. Slightly depress the “ENGINE START STOP” switch (do not start engine).

2. Verify the trip meter Readings are displayed. Switch off the ignition.

3. Press the “ENGINE START STOP” switch once while simultaneously pressing the Trip Meter reset button (do not start engine).

In the absence of a multiinformation display: Press and hold the button continuously until the trip meter reads “000000.”

4. To make sure the indicator has been reset, turn off the ignition and start the engine.

1. To change the display to SETTINGS while the engine is running, use the controls on the right side of the steering wheel.

2. From the SETTINGS menu, choose MAINTENANCE SYSTEM.

3. To reset the system, choose YES.

4. “Initilization Completed” will be shown when the reset is finished.

How can I turn the Toyota Highlander’s maintenance light back on?

Toyota Highlander Maintenance Light Reset Press the odometer button on your dashboard quickly, hold it there while turning the key to the second position. Hold the odometer button down for another 10 seconds or so. You can hear a beeping noise in addition to the maintenance light beginning to flash. The light ought should thereafter go out.

How can I turn off my Toyota’s maintenance light?

Turn the key to position two while pressing and holding the odometer button on the dashboard. When the maintenance light begins to flash, keep holding the odometer button. There may even be beeping sounds. The light ought to dim.

Why does my maintenance light come on after I change the oil?

  • The ODO display will briefly flash before beginning to display only zeros.
  • Release the ODO button once it starts to show zeros, then flip the key back to the “off” position.
  • Turn the key in the ignition while maintaining pressure on the ODO button. till the dash lights turn on. Avoid starting the car.
  • Now the light will read “MAINT REQD.”
  • If the car is on, turn it off.
  • Press and hold the ODO reset / readout button while the engine is off.
  • Verify that the odometer’s (ODO) total mileage displaytypically the ‘A’ displayis on.

What ‘MAINT REQD’ Means

Within 5000 miles of the last reset, the “MAINT REQD” indicator illuminates. It is merely a mileage counter meant to serve as a reminder to the user that an oil change is required and in no way indicates any system failure. If a specialist has always performed maintenance on your Toyota, they reset it after each oil change. It should be noted that the recommended oil change interval is not always 5000 miles. To find out how frequently the oil in your Camry needs to be changed, consult the owner’s manual and your usual technician.

Need Help?

Our service team would be delighted to assist you. Our entire staff of experts is Toyota-certified and adept in resolving even the most challenging problems with your Toyota. Make an appointment right away!

How can you turn a Toyota’s oil change light back on?

In order to start the car, turn the ignition to position one after inserting your key. Turn your key to position two after pressing and holding the trip meter reset button on the dashboard. Hold the odometer button down for a further ten seconds. The light should then begin to flash and potentially beep before turning off.

What does the triangle in a Toyota Highlander with the exclamation point mean?

Have you ever been operating your Toyota Highlander when a symbol suddenly appeared on the dashboard? If so, then every sign has a unique meaning. Everybody occasionally gets a visit from a dashboard light.

While some lights are only indicators, others are alarms indicating your Highlander requires regular upkeep or repairs. It’s crucial to understand what each dashboard light on your vehicle indicates.

An indication light is any light that appears on the Toyota Highlander’s dashboard and is either blue or green. A light that alerts you that anything in your car is on is what an indicator light does exactly as it sounds. The majority of the time, it indicates on your dashboard whether a Highlander feature has been activated or canceled.

Some of the typical warning lights that you might see are listed below:

  • TRAC OFF Indicator: This light appears to alert you to the need to turn off the vehicle’s traction control and/or stability control systems.
  • An icon resembling a speedometer serves as a visual cue that the cruise control system is engaged.
  • An emblem in the shape of a key will display on your Toyota Highlander’s dashboard to let you know that the security system is operating as intended.
  • Turn Signal Indicator: These green lights signify that the Highlander’s right or left turn signal has been engaged.
  • The VSC/TRAC OFF Indicator shows whether the traction control or vehicle stability control systems are activated or off. To turn off the light, push and hold the switch while the car is still moving.
  • Headlight High Beam Indicator: This blue light signifies the active state of the headlight high beams.

Your Toyota Highlander will have a warning light if it has a yellow or red light. A warning light is typically an issue that needs to be resolved right away in order to keep your SUV in the finest condition possible. If you notice any of the lights listed below, get in touch with our service staff to arrange a visit:

  • Master Warning Light: When the master warning system detects a problem, a triangle with an exclamation point inside of it shows on the dashboard and a buzzer sounds.
  • Electric Power Steering (EPS) Warning Light: It’s critical to have your Highlander evaluated if this warning light, which looks like a steering wheel next to an exclamation point, comes on your dashboard.
  • When an icon resembling an old-fashioned oil can appears, it means your oil pressure is too low and should be checked. Low Engine Oil Pressure Warning Light: You should take immediate action to address this problem in order to prevent potential engine damage.

My maintenance is necessary light is on, why?

The mileage is the only factor that activates the maintenance required light, also known as the service required light. When this light turns on, different automakers have varying standards. For instance, the maintenance needed light on a car might turn on once every 10,000 lights and stay lit until it is manually turned off.

The oil change, spark plug replacement, new tire, etc. are just a few examples of the routine maintenance that should be performed on a vehicle.

When servicing your vehicle, mechanics typically reset the maintenance required light. The process for resetting the maintenance required light differs based on the make and type of the car, yet, if they don’t, you can do it yourself.

What does it imply if your Toyota has a maintenance required light on?

On your dashboard, the Toyota maintenance light may read “MAINT REQD. It’s a light that is always on and alerts you when you require an oil change at a licensed auto shop. Your Toyota will run more smoothly and efficiently if you change the oil in your car.

How long is a maintenance light good for?

The oil light suddenly came on. You’re clueless as to why. And to make matters worse, you don’t really have a lot of time right now to worry about it.

How long can you drive with this object is in your face, you ponder. wonderful question We’ll respond to it and explain why it could have initially surfaced. Move along!

How Long Can You Drive With Oil Light On?

If the oil light comes on, you should try to get a repair to look at your car as soon as possible. However, keep in mind that a little more driving around won’t harm anything.

Typically, it takes about two weeks or 500 miles of driving before a flashing oil light becomes a serious issue. However, once that happens, things can quickly deteriorate and cause significant mechanical damage. Therefore, attempt to get your car serviced as soon as possible.

There’s Not Enough Oil in the Car

Numerous issues, including blown head gaskets and broken valves, can cause engines to leak oil. Whatever the case, if oil leaks from your car, it will begin to suffer and may eventually sustain catastrophic damage. As a result, the oil light will turn on when there isn’t enough oil in the vehicle.

The Vehicle’s Oil Pressure Is Low

A vehicle needs enough oil pressure to operate at peak performance. However, keep in mind that a number of things (such as an obstructed oil filter, a broken pressure gauge, insufficient engine oil, etc.) could cause the oil pressure to go too low. This will cause the oil light to come on.

The Oil Pressure Sensor is Malfunctioning

The malfunction of your oil pressure sensor may also cause your oil light to come on. Randomly, this happens, usually as a result of normal wear and tear. If the problem is not corrected, your car won’t have enough oil pressure, which will eventually cause more harm.

The Oil Pump Is Bad

A car’s oil pump may eventually fail as a result of wear and tear on the vehicle. The oil light will unquestionably respond to this. The only option at that point would be to replace the pump since if you don’t, your engine would experience increased friction and end its life much earlier than it should.

Is Your Oil Light Still On?

We have a group of expert vehicle repair specialists who will locate the cause of your check engine light before taking steps to fix it.

Even though my automobile says maintenance is necessary, can I still drive it?

Simply put, the flashing maintenance required light is alerting you that maintenance on your car is necessary. The indicator will come on when a predetermined period of time has passed since your car’s last service or based on how far you’ve driven it.

This light typically indicates that you should change the oil in your car. The maintenance data will be reset for you when your car has been taken in for service.

To manually reset the system to turn off the light, however, follow these instructions:

When the maintenance light comes on, you can continue to drive, but bear in mind that you are doing so at your own risk if the required or scheduled repair is skipped.