How To Reset Maintenance Light On Toyota Tundra

Toyota / By
  • Choose “Vehicle Settings” from the multi-information display.
  • A maintenance reset is chosen.
  • Select “YES” and hit it.

How can the maintenance needed light on a 2013 Toyota Tundra be reset?

  • Without starting the engine, turn the ignition to the “On position. If your car has a push-button ignition, press “Start” without depressing the brake pedal.
  • By pushing the display change button or “Trip button,” you can change the display to “Trip A.”
  • Completely shut off the car.
  • Keep holding down the “Trip button.”
  • Hold the “Trip button down while turning the ignition to “On without starting the car.
  • Release the “Trip button” whenever the trip meter reads “all zeros.”

How can you turn a Toyota’s maintenance needed light back on?

In order to start the car, turn the ignition to position one after inserting your key. Turn your key to position two after pressing and holding the trip meter reset button on the dashboard. Hold the odometer button down for a further ten seconds. The light should then begin to flash and potentially beep before turning off.

How can you get rid of the need for maintenance?

How do I turn the “Maint Reqd” light back on?

  • Switch the ignition to the ON position.
  • Set the trip display to TRIP A mode on the odometer.
  • Activate the OFF position on the ignition switch.
  • Turn the ignition switch to the ON position while pressing and holding the Trip Meter RESET button.
  • It will do so via the service maintenance reminder light.

How can the maintenance needed light on a 2005 Toyota Tundra be reset?

  • Make sure the tripmeter is lit up on the vehicle’s odometer when the ignition is in the ON position, then switch it to the OFF position.
  • Press and hold the MODE or TRIP reset button.
  • Switch the ignition to the ON position while holding the reset button.

**To activate the Key On/Engine Off mode using the Engine Start/Stop button, depress the button twice while keeping your foot off the brake pedal.

  • Hold the reset button down until the odometer shows “000000 is shown before the initial value.
  • Ensure the reset was acknowledged by turning the vehicle on and off again.
  • Press SETUP on the navigation screen.
  • Press VEHICLE, then MAINTENANCE after that.
  • To reset an item, touch the desired item (i.e. Engine Oil, Oil Filter, Tire Rotation, etc.)
  • Fill in the necessary fields with the new information after this “Following Service period (i.e. date and distance till next service is due)
  • Click OK when finished.
  • Steps 3-5 must be repeated for any additional services rendered.
  • You can press INFO or SETUP on the navigation screen.
  • Next click MAINTENANCE.
  • Fill up the necessary fields with the new information after this “Next Service Interval (i.e., the day or time till the next service is due)
  • Make that the odometer is shown with the ignition switch in the ON position, then switch it to the OFF position.
  • Hold the reset button down until the odometer shows “the MAINT REQD light flashes, or 000000

These reset instructions should be useful to you, we hope. With our mobile app Oil Reset Pro, which is available in the Apple and Google Play stores, you can always have this method at your fingertips along with the rest of the domestic, Asian, and European manual maintenance reset procedures. To get a free download from the shop right away, click the links below.

Why, after an oil change, is my maintenance required light still on?

Every 4,500 miles, once the maintenance has been reset, the light turns on for around 3 seconds before flashing for approximately 15 seconds. The majority of the time, this merely indicates that your car may need an oil change. After the maintenance data has been reset, the light will turn on and stay on if more than 5,000 miles have been driven.

How to Reset Maintenance Data on Toyota Corolla

You can easily reset your maintenance data. After the necessary maintenance has been carried out in accordance with the maintenance schedule, proceed as follows:

1. Switch the “engine start/stop switch or trip meter-activated engine shutoff a reading appeared,

2. Turn the trip meter reset switch while pressing the “engine switch ON, engine START STOP switch, etc.

3. Hold the button down while continuing to push it until the trip meter reads 000000.

When you understand what each warning light on your Toyota indicates, maintaining it is easy. Never be afraid to call the service staff at Toyota Palo Alto if you ever wonder whether your car needs any type of maintenance. You can ask our helpful staff for assistance in determining what’s wrong with your car and whether you need to schedule a service appointment.

Why does my Toyota state it needs maintenance?

  • Verify that the odometer’s (ODO) total mileage displaytypically the ‘A’ displayis on.
  • Release the ODO button once it starts to show zeros, then flip the key back to the “off” position.
  • Press and hold the ODO reset / readout button while the engine is off.
  • If the car is on, turn it off.
  • The ODO display will briefly flash before beginning to display only zeros.
  • Now the light will read “MAINT REQD.”
  • Turn the key in the ignition while maintaining pressure on the ODO button. till the dash lights turn on. Avoid starting the car.

What ‘MAINT REQD’ Means

Within 5000 miles of the last reset, the “MAINT REQD” indicator illuminates. It is merely a mileage counter meant to serve as a reminder to the user that an oil change is required and in no way indicates any system failure. If a specialist has always performed maintenance on your Toyota, they reset it after each oil change. It should be noted that the recommended oil change interval is not always 5000 miles. To find out how frequently the oil in your Camry needs to be changed, consult the owner’s manual and your usual technician.

Need Help?

Our service team would be delighted to assist you. Our entire staff of experts is Toyota-certified and adept in resolving even the most challenging problems with your Toyota. Make an appointment right away!

When your maintenance light illuminates, what should you do?

Simply put, the flashing maintenance required light is alerting you that maintenance on your car is necessary. The indicator will come on when a predetermined period of time has passed since your car’s last service or based on how far you’ve driven it.

This light typically indicates that you should change the oil in your car. The maintenance data will be reset for you when your car has been taken in for service.

To manually reset the system to turn off the light, however, follow these instructions:

When the maintenance light comes on, you can continue to drive, but bear in mind that you are doing so at your own risk if the required or scheduled repair is skipped.