In many vehicles, persistent maintenance lights are a regular problem. Typically, there is no electrical issue; instead, your mechanic just neglected to reset the alert after your service was finished.
Just adhere to these simple steps to reset the maintenance required light on your Toyota Sienna:
- Put your ignition key in accessory mode. You shouldn’t start your engine.
- Find the ODO/TRIP button and press it until ODO appears on the display.
- OFFSET your Sienna.
- As you continue to hold down the ODO/TRIP button, turn on your car.
- You have reset the maintenance light when the odometer display shows just zeros.
- Once more, turn off your car.
Your car is not in need of maintenance, so you can drive with a little more confidence now that the maintenance light is off. Check out the Jerry app to see how much you could be saving on auto insurance before you get back on the road.
After you download Jerry, all you need to do is respond to a few questions that will take you around 45 seconds to do, and you’ll get car insurance rates for coverage that is identical to your current plan right away. Customers of Jerry save $879 year on average.
In This Article...
On a 2015 Toyota Sienna, how do you turn off the maintenance is needed light?
If mechanics neglect to reset the maintenance alert after servicing the car, it may become an annoyance. Fortunately, a 2015 Toyota Sienna’s maintenance light is simple to reset.
Simply adhere to these guidelines to restart the light:
- The maintenance is necessary light needs to be reset.
- To get the Trip A reading, press the trip odometer button on the instrument cluster.
- A key is turned to the on position. Alternatively, if your vehicle has a push-button start, you can depress the button twice while keeping your foot off the brake.
- In addition to pressing and holding the trip odometer button, restart the engine of the car.
- Shut down the van.
You obviously care about your automobile if you take such good care of your Sienna. Therefore, make sure your car is fully insured without paying too much. It is quick and simple with the Jerry app.
Jerry is a certified insurance broker who obtains rates from numerous reputable and highly rated auto insurance providers. Jerry can assist you in purchasing insurance and terminating your current policy after you discover a fantastic quote for your 2015 Toyota Sienna. Customers often save close to $900 annually!
How can I dim the maintenance is necessary light?
How do I turn the “Maint Reqd” light back on?
- Switch the ignition to the ON position.
- Set the trip display to TRIP A mode on the odometer.
- Activate the OFF position on the ignition switch.
- Turn the ignition switch to the ON position while pressing and holding the Trip Meter RESET button.
- It will do so via the service maintenance reminder light.
Automatic Transmission Oil Capacity
Depending on the automatic gearbox, the 2016 Toyota Sienna can hold 6.9 or 7.1 quarts (6.53 or 6.72 liters) of automatic transmission oil.
What does Toyota Sienna’s “maint reqd” mean?
Toyota Maintenance Required Light: This light illuminates to notify you that your oil needs to be changed. 5,000 miles after the last reset, it turns on.
This light only turns on as a result of those miles; it has no means of knowing if your oil has been changed or not since then, and it never, ever indicates a problem.
When changing the oil, shops occasionally forget to reset the maintenance-required meter if the light isn’t yet on. Simply said, many quick-lube businesses are unable to reset it.
Resetting the maintenance needed light is simple. On most Toyotas, you can just:
- A key is turned to the on position.
- Back off the key after that.
- Next, check to see if the odometer reading is visible. (On some models, the trip-meter is included.) “A that you desire to be visible.)
- Now press and hold the trip meter reset button. (Same button as for switching between the trip meters and the odometer.)
- Turn the key back to the “on position, but not all the way to the “start position, while keeping the reset button down. There should be a string of dashes on the odometer display that gradually vanish. A string of zeros will appear after they have all vanished. Hold the reset button down while waiting for the trip meter’s (or the odometer’s) zeros to disappear “A) Reading comes back.
The car should now be counting down to the next 5,000 interval, at which point the maintenance-required signal will turn back on.
How can my Toyota maintenance be reset?
To ensure that their Camry, RAV4, or other Toyota models are up to date on their maintenance plans, Lakeland drivers rely on their Toyota maintenance light to keep track of important services like oil changes, tire rotations, and more. After your car has been serviced, you’ll need to manually switch it off and reset the light so it can keep track of your car’s health. Follow the instructions below to reset a Toyota maintenance light:
- In order to start the car, turn the ignition to position one after inserting your key.
- Turn your key to position two after pressing and holding the trip meter reset button on the dashboard.
- Hold the odometer button down for a further ten seconds. The light should then begin to flash and potentially beep before turning off.
- Start the vehicle after releasing the odometer button. If the maintenance light on your Toyota RAV4, Highlander, Camry, Corolla, or any other model is still on, follow these steps just one or two more times to turn it off.
- If the issues persist, it’s possible that you’ll require more services if they do. Bring it to your neighborhood Toyota dealer so that it can be completely inspected and you can get back on the road.
On a 2014 Toyota RAV4, how do you turn the maintenance light back on?
How to Extinguish the Toyota RAV4’s Maintenance Light
- Put the ignition on with your key. Turn the key to the first position.
- On the dashboard, press the reset trip meter button. Hold it down for a couple of seconds.
- Hold the odometer button down for another five or so seconds.
- Release the odometer button after it is off.
Why does my maintenance light come on after I change the oil?
- The ODO display will briefly flash before beginning to display only zeros.
- Press and hold the ODO reset / readout button while the engine is off.
- If the car is on, turn it off.
- Verify that the odometer’s (ODO) total mileage displaytypically the ‘A’ displayis on.
- Now the light will read “MAINT REQD.”
- Release the ODO button once it starts to show zeros, then flip the key back to the “off” position.
- Turn the key in the ignition while maintaining pressure on the ODO button. till the dash lights turn on. Avoid starting the car.
What ‘MAINT REQD’ Means
Within 5000 miles of the last reset, the “MAINT REQD” indicator illuminates. It is merely a mileage counter meant to serve as a reminder to the user that an oil change is required and in no way indicates any system failure. If a specialist has always performed maintenance on your Toyota, they reset it after each oil change. It should be noted that the recommended oil change interval is not always 5000 miles. To find out how frequently the oil in your Camry needs to be changed, consult the owner’s manual and your usual technician.
Need Help?
Our service team would be delighted to assist you. Our entire staff of experts is Toyota-certified and adept in resolving even the most challenging problems with your Toyota. Make an appointment right away!
When your maintenance light illuminates, what should you do?
Simply put, the flashing maintenance required light is alerting you that maintenance on your car is necessary. The indicator will come on when a predetermined period of time has passed since your car’s last service or based on how far you’ve driven it.
This light typically indicates that you should change the oil in your car. The maintenance data will be reset for you when your car has been taken in for service.
To manually reset the system to turn off the light, however, follow these instructions:
When the maintenance light comes on, you can continue to drive, but bear in mind that you are doing so at your own risk if the required or scheduled repair is skipped.
How can I turn my car’s service light back on?
First, turn on the engine. Step 2: The display will say “Service required” if a service is overdue. Locate and press the OK button at the top right of the steering wheel for longer than one second to clear this message. The service interval will be reset to its default value in Step 3.