The 2004 Toyota Sienna’s check engine light cannot be reset. It can be caused by almost anything and turns on when there is a problem with the car. Because of this, unless something extremely evident has gone wrong, it is not worth Your time to investigate a random problem. The best course of action is to take the automobile to a technician and have them use an OBD tool to scan it. They will be able to read the difficulty code and inform you of the issue as a result. Once you are aware of this, you can take action to have it fixed, which will turn the light off. The gas cap and fuel door are one item to examine, though. The light will turn on if either the cap is missing or the door is open. Make sure you check it first because it is stupid to take this to the technician.
The 2004 Toyota Sienna’s maintenance light must be reset by turning the car to the on position with the engine off, holding down the odometer reset button, turning the car to the off position, and then turning it back to the on position.
Actually, the reverse is true. Turn the odometer reset button to the ON position by pressing and holding the button when it is in the OFF position. Release the odometer reset button after counting down the bars from 5 to 0. The maintenance required light should go out.
Put the key in the on position, turn the key off, press and hold the odometer/reset button, and then turn the key back to the on position without starting the engine to reset the maintenance light on a 2004 Toyota Sienna.
In This Article...
How can the maintenance needed light on a Toyota Sienna be reset?
In many vehicles, persistent maintenance lights are a regular problem. Typically, there is no electrical issue; instead, your mechanic just neglected to reset the alert after your service was finished.
Just adhere to these simple steps to reset the maintenance required light on your Toyota Sienna:
- Put your ignition key in accessory mode. You shouldn’t start your engine.
- Find the ODO/TRIP button and press it until ODO appears on the display.
- OFFSET your Sienna.
- As you continue to hold down the ODO/TRIP button, turn on your car.
- You have reset the maintenance light when the odometer display shows just zeros.
- Once more, turn off your car.
Your car is not in need of maintenance, so you can drive with a little more confidence now that the maintenance light is off. Check out the Jerry app to see how much you could be saving on auto insurance before you get back on the road.
After you download Jerry, all you need to do is respond to a few questions that will take you around 45 seconds to do, and you’ll get car insurance rates for coverage that is identical to your current plan right away. Customers of Jerry save $879 year on average.
Why does my maintenance light come on after I change the oil?
- If the car is on, turn it off.
- Press and hold the ODO reset / readout button while the engine is off.
- Release the ODO button once it starts to show zeros, then flip the key back to the “off” position.
- Turn the key in the ignition while maintaining pressure on the ODO button. till the dash lights turn on. Avoid starting the car.
- The ODO display will briefly flash before beginning to display only zeros.
- Now the light will read “MAINT REQD.”
- Verify that the odometer’s (ODO) total mileage displaytypically the ‘A’ displayis on.
What ‘MAINT REQD’ Means
Within 5000 miles of the last reset, the “MAINT REQD” indicator illuminates. It is merely a mileage counter meant to serve as a reminder to the user that an oil change is required and in no way indicates any system failure. If a specialist has always performed maintenance on your Toyota, they reset it after each oil change. It should be noted that the recommended oil change interval is not always 5000 miles. To find out how frequently the oil in your Camry needs to be changed, consult the owner’s manual and your usual technician.
Need Help?
Our service team would be delighted to assist you. Our entire staff of experts is Toyota-certified and adept in resolving even the most challenging problems with your Toyota. Make an appointment right away!
My maintenance is necessary light is on, why?
The mileage is the only factor that activates the maintenance required light, also known as the service required light. When this light turns on, different automakers have varying standards. For instance, the maintenance needed light on a car might turn on once every 10,000 lights and stay lit until it is manually turned off.
The oil change, spark plug replacement, new tire, etc. are just a few examples of the routine maintenance that should be performed on a vehicle.
When servicing your vehicle, mechanics typically reset the maintenance required light. The process for resetting the maintenance required light differs based on the make and type of the car, yet, if they don’t, you can do it yourself.
How can you turn a Toyota’s dash light back on?
Turn your key to position two after pressing and holding the trip meter reset button on the dashboard. Hold the odometer button down for a further ten seconds. The light should then begin to flash and potentially beep before turning off. Start the vehicle after releasing the odometer button.
A 2003 Toyota Highlander’s maintenance required light needs to be reset, but how?
- Make sure the tripmeter is lit up on the vehicle’s odometer when the ignition is in the ON position, then switch it to the OFF position.
- Press and hold the MODE or TRIP reset button.
- Switch the ignition to the ON position while holding the reset button.
**To activate the Key On/Engine Off mode using the Engine Start/Stop button, depress the button twice while keeping your foot off the brake pedal.
- Hold the reset button down while waiting for the odometer to show “000000 before releasing it to see the original value.
- Ensure the reset was acknowledged by turning the vehicle on and off again.
- You can press INFO or SETUP on the navigation screen.
- Next click MAINTENANCE.
- To reset an item, touch the desired item (i.e. Engine Oil, Oil Filter, Tire Rotation, etc.)
- From here, enter the new “Next Service interval” (i.e., the day the next service is due and/or the time till the next service is due) in the appropriate fields.
- Click OK when finished.
- Steps 3-5 must be repeated for any additional services rendered.
- Make that the odometer is shown with the ignition switch in the ON position, then switch it to the OFF position.
- Hold the reset button down until either the MAINT REQD light turns off or the odometer reads “000000.”
These reset instructions should be useful to you, we hope. With our mobile app Oil Reset Pro, which is available in the Apple and Google Play stores, you can always have this method at your fingertips along with the rest of the domestic, Asian, and European manual maintenance reset procedures. To get a free download from the shop right away, click the links below.
What does the Toyota Sienna’s check engine light signify?
Your Toyota Sienna’s check engine light should be brought in right away if it starts flashing, which indicates that the issue requires immediate repair. Typically, this blinking light denotes a severe engine misfire that allows unburned fuel to escape into the exhaust system.
Even though my automobile says maintenance is necessary, can I still drive it?
Simply put, the flashing maintenance required light is alerting you that maintenance on your car is necessary. The indicator will come on when a predetermined period of time has passed since your car’s last service or based on how far you’ve driven it.
This light typically indicates that you should change the oil in your car. The maintenance data will be reset for you when your car has been taken in for service.
To manually reset the system to turn off the light, however, follow these instructions:
When the maintenance light comes on, you can continue to drive, but bear in mind that you are doing so at your own risk if the required or scheduled repair is skipped.