How To Reset Maintenance Light On Toyota Land Cruiser

Toyota / By

To start or stop the engine, press the button once.

STEP 4

  • Press the “ENGINE START STOP button twice while holding down the odo/trip reset button. Keep holding the odo/trip button until all of the oil maintenance data has been reset.

This Tutorial may possible work for the following car model.

  • Autana Toyota Land Cruiser (Colombia and Venezuela)
  • Toyota LX 470
  • LX570 Lexus
  • Roraima Toyota (Venezuela)
  • HXK5022XSC Xinkai (China, JV)
  • Land Cruiser Wanli (China, JV)
  • Land Cruiser V8 Toyota (Europe)

The maintenance light on a 2006 Toyota Land Cruiser has to be reset.

  • Make sure the tripmeter is lit up on the vehicle’s odometer when the ignition is in the ON position, then switch it to the OFF position.
  • Press and hold the MODE or TRIP reset button.
  • Switch the ignition to the ON position while holding the reset button.

**To activate the Key On/Engine Off mode using the Engine Start/Stop button, depress the button twice while keeping your foot off the brake pedal.

  • Hold the reset button down until the odometer shows “000000 is shown before the initial value.
  • Ensure the reset was acknowledged by turning the vehicle on and off again.
  • Press SETUP on the navigation screen.
  • Press VEHICLE, then MAINTENANCE after that.
  • To reset an item, touch the desired item (i.e. Engine Oil, Oil Filter, Tire Rotation, etc.)
  • Fill in the necessary fields with the new information after this “Following Service period (i.e. date and distance till next service is due)
  • Click OK when finished.
  • Steps 3-5 must be repeated for any additional services rendered.
  • Make that the odometer is shown with the ignition switch in the ON position, then switch it to the OFF position.
  • Hold the reset button down until the odometer shows “the MAINT REQD light flashes, or 000000
  • You can press INFO or SETUP on the navigation screen.
  • Next click MAINTENANCE.
  • Fill up the necessary fields with the new information after this “Next Service Interval (i.e., the day or time till the next service is due)

These reset instructions should be useful to you, we hope. With our mobile app Oil Reset Pro, which is available in the Apple and Google Play stores, you can always have this method at your fingertips along with the rest of the domestic, Asian, and European manual maintenance reset procedures. To get a free download from the shop right away, click the links below.

How can I erase the maintenance reminder on my Toyota?

Turn your key to the second position after pressing and holding the trip meter reset button on the dashboard. Hold the odometer button down for a total of 10 seconds. The light ought to flash, potentially beep, and then go off as a result. Release the odometer button once it has been turned off, then start the automobile.

How can you turn a 2017 Toyota Land Cruiser’s maintenance light back on?

How Can the Maintenance Required Light Be Reset?

  • Turn on your car. Look at your dashboard when your key is in the on position.
  • Press the Trip Meter Reset Button after turning off the engine.
  • Re-start the vehicle.
  • Keep pressing the reset button.
  • Reset button released

How can I dim the maintenance is necessary light?

How do I turn the “Maint Reqd” light back on?

  • Switch the ignition to the ON position.
  • Set the trip display to TRIP A mode on the odometer.
  • Activate the OFF position on the ignition switch.
  • Turn the ignition switch to the ON position while pressing and holding the Trip Meter RESET button.
  • It will do so via the service maintenance reminder light.

How can you identify the need for oil maintenance?

Get behind the wheel of a pre-2005 GM vehicle, shut the door, turn the ignition to the auxiliary power position, wait for the lights to come on, then quickly depress the accelerator three times within five seconds after turning the key. When the counter has been reset, the oil light should flash.

Use this process on a GM model from 2006 or later, however keep in mind that some cars have slightly different button locations to hit to reset.

Turn the key to the auxiliary power position while sitting behind the wheel and with all the doors closed. After finding the oil life message by scrolling through the options on the Driver Information Center (DIC), press and hold the enter key for one second before letting go. There will be a reset notice on the DIC.

Why does my maintenance light come on after I change the oil?

  • Press and hold the ODO reset / readout button while the engine is off.
  • The ODO display will briefly flash before beginning to display only zeros.
  • Verify that the odometer’s (ODO) total mileage displaytypically the ‘A’ displayis on.
  • Turn the key in the ignition while maintaining pressure on the ODO button. till the dash lights turn on. Avoid starting the car.
  • If the car is on, turn it off.
  • Release the ODO button once it starts to show zeros, then flip the key back to the “off” position.
  • Now the light will read “MAINT REQD.”

What ‘MAINT REQD’ Means

The ‘MAINT REQD’ light turns on every 5000 miles from the previous time it was reset. It is merely a mileage counter meant to serve as a reminder to the user that an oil change is required and in no way indicates any system failure. If you’ve always had your Toyota serviced by a technician, he or she resets it after every oil change. It should be noted that the recommended oil change interval is not always 5000 miles. To find out how frequently the oil in your Camry needs to be changed, consult the owner’s manual and your usual technician.

Need Help?

Our service team would be delighted to assist you. Our entire staff of experts is Toyota-certified and adept in resolving even the most challenging problems with your Toyota. Make an appointment right away!

My maintenance is necessary light is on, why?

The mileage is the only factor that activates the maintenance required light, also known as the service required light. When this light turns on, different automakers have varying standards. For instance, the maintenance needed light on a car might turn on once every 10,000 lights and stay lit until it is manually turned off.

The oil change, spark plug replacement, new tire, etc. are just a few examples of the routine maintenance that should be performed on a vehicle.

When servicing your vehicle, mechanics typically reset the maintenance required light. The process for resetting the maintenance required light differs based on the make and type of the car, yet, if they don’t, you can do it yourself.

My maintenance is necessary light is blinking; why?

If you’re unsure of what a warning light on your dashboard indicates, it can make you feel uneasy. Thankfully, you normally don’t need to worry about it.

A flashing maintenance light is typically your car’s method of telling you that it needs to be serviced soon. The light’s purpose is to alert drivers when it might be time for an oil change or a tune-up by turning on at predetermined intervals.

You have roughly 500 miles left before you need to have your automobile serviced when the light first starts flashing. Your maintenance light will inform you by turning on and staying on when it’s due for service.

Download Jerry, the super insurance expert app, to find the answers to all of your maintenance-related concerns.

Jerry is a powerful tool for finding vehicle insurance discounts, and it can do so in just 45 seconds! Jerry will evaluate prices from the leading insurance companies in the country to get you the cheapest offers, and if you decide to transfer, he can even cancel your current policy!

What does a “upkeep necessary” light signify?

Simply put, the flashing maintenance required light is alerting you that maintenance on your car is necessary. The indicator will come on when a predetermined period of time has passed since your car’s last service or based on how far you’ve driven it.

This light typically indicates that you should change the oil in your car. The maintenance data will be reset for you when your car has been taken in for service.

To manually reset the system to turn off the light, however, follow these instructions:

When the maintenance light comes on, you can continue to drive, but bear in mind that you are doing so at your own risk if the required or scheduled repair is skipped.

How can I turn my car’s service light back on?

First, turn on the engine. Step 2: The display will say “Service required” if a service is overdue. Locate and press the OK button at the top right of the steering wheel for longer than one second to clear this message. The service interval will be reset to its default value in Step 3.

What distinguishes a maintenance requirement from a check engine light?

Many people are unsure of what each of these lights means, and the check engine light and the service engine soon light are frequently confused for one another. We’ll describe how distinct they actually are despite the fact that they appear to be similar.

Authored by: Bradley Hayes, Director of Marketing at Autoscope European Car Repair and Automotive Blogger

Since Karl Benz originally unveiled his Benz Patent Motorwagen, automotive technology has advanced significantly. In fact, the notion that computers are essentially controlling our cars in today’s computer-driven society shouldn’t be shocking. In order to assure the precise right operation of your vehicle’s numerous systems and components, they regulate and track their performance. They even notify the driver when the automobile needs repair or maintenance. While technology hasn’t yet given our cars voices (like Kitt from Knight Rider), it has made it possible for them to communicate in other ways, such as through a series of backlit symbols that show up in your instrument cluster, such as a “check engine” and a “service engine” light.

How can you turn a Toyota’s oil light back on?

A Toyota Maintenance Light Reset

  • In order to start the car, turn the ignition to position one after inserting your key.
  • Turn your key to position two after pressing and holding the trip meter reset button on the dashboard.
  • Hold the odometer button down for a further ten seconds.