You must turn on the ignition without starting the motor in a 2018 Toyota Highlander to reset the change oil light. You can do this if your vehicle has a push-to-start feature by pressing the start button once while taking your foot off the brake pedal. Then you must push the Odometer button again and again until Trip A appears on the dash. Turn off the ignition when you notice Trip A. Then, while restarting the ignition, you must push and hold the odometer button. Hold the Odometer button down until the display reads 000000 Miles, then release it. You can stop when you notice this by turning off the ignition.
Press the push to start button twice on a 2018 Toyota Highlander without depressing the brake pedal to reset the replace oil light. It will switch to accessory mode. Press the odometer button when in accessory mode to bring up trip a. Turn the automobile off in trip A. To return to accessory mode, press the push-to-start button twice while holding down the brake pedal while holding down the odometer button. The change oil light has been reset once the screen has cleared.
In This Article...
How can you turn a Toyota Highlander’s maintenance light back on?
Toyota Highlander Maintenance Light Reset Press the odometer button on your dashboard quickly, hold it there while turning the key to the second position. Hold the odometer button down for another 10 seconds or so. You can hear a beeping noise in addition to the maintenance light beginning to flash. The light ought should thereafter go out.
What does a 2018 Toyota Highlander maintenance required mean?
On your dashboard, the Toyota maintenance light may read “MAINT REQD. It’s a light that is always on and alerts you when you require an oil change at a licensed auto shop.
How can my Toyota maintenance be reset?
In order to start the car, turn the ignition to position one after inserting your key. Turn your key to position two after pressing and holding the trip meter reset button on the dashboard. Hold the odometer button down for a further ten seconds. The light should then begin to flash and potentially beep before turning off.
On a 2018 Toyota Sienna, how do you turn off the maintenance is needed light?
Don’t worry; it’s a simple fix, and our wife won’t know the difference! By doing the following, you can clear the maintenance light on your 2018 Toyota Sienna:
- By clicking OK, select MAINTENANCE RESET.
- The oil light should be off when you start your automobile.
- To confirm your selection, click YES when prompted.
- Set your ignition to ON while your car is in park. All of the lights in your automobile will be turned on, but the engine won’t start. Push the start button twice without applying the brake if your Sienna has one.
- Using the navigation buttons on the right side of your steering wheel, locate the Settings menu.
If the indicator continues to illuminate, your car might be having trouble. Perhaps your wife accidently moved the sensor, or perhaps there is a completely separate issue. In either case, it’s a good idea to consult an expert to make sure your automobile is secure, particularly if the light comes back on.
Why not take a moment to make sure your automobile is covered by a reliable insurance policy while you’re learning more about it? Using the Jerry app, finding the best insurance is quick and easy. Download the app, then select from a wide selection of free quotes after quickly answering a few questions. Jerry drivers save $879 annually on auto insurance.
Why does my Toyota Highlander indicate that it needs maintenance?
Numerous Toyota Highlander models come with maintenance alert systems that notify the driver when routine maintenance needs to be performed. The maintenance reminder most frequently illuminates due to oil changes. The light ought to be reset as part of the oil change process by a Toyota dealer. If your mechanic doesn’t reset it or if you perform the repair yourself, you can reset the maintenance is necessary light by yourself.
Step 4
When the maintenance required light blinks a few times before going out, let go of the odometer button.
Toyota Motor Sales, USA, Inc., “2010 Highlander Owner’s Manual,” 2009
Why, after an oil change, is my maintenance required light still on?
Every 4,500 miles, once the maintenance has been reset, the light turns on for around 3 seconds before flashing for approximately 15 seconds. The majority of the time, this merely indicates that your car may need an oil change. After the maintenance data has been reset, the light will turn on and stay on if more than 5,000 miles have been driven.
How to Reset Maintenance Data on Toyota Corolla
You can easily reset your maintenance data. After the necessary maintenance has been carried out in accordance with the maintenance schedule, proceed as follows:
1. Switch the “engine start/stop switch or trip meter-activated engine shutoff a reading appeared,
2. Turn the trip meter reset switch while pressing the “engine switch ON, engine START STOP switch, etc.
3. Hold the button down while continuing to push it until the trip meter reads 000000.
When you understand what each warning light on your Toyota indicates, maintaining it is easy. Never be afraid to call the service staff at Toyota Palo Alto if you ever wonder whether your car needs any type of maintenance. You can ask our helpful staff for assistance in determining what’s wrong with your car and whether you need to schedule a service appointment.
Is the check engine light the same as the maintenance necessary light?
Some motorists could mistake the check engine light for the service or maintenance necessary light on the instrument cluster. These alert lights are not connected. The service required light simply indicates that the vehicle needs an oil change or other standard maintenance.
Why does my Toyota state it needs maintenance?
- Press and hold the ODO reset / readout button while the engine is off.
- Now the light will read “MAINT REQD.”
- If the car is on, turn it off.
- The ODO display will briefly flash before beginning to display only zeros.
- Turn the key in the ignition while maintaining pressure on the ODO button. till the dash lights turn on. Avoid starting the car.
- Release the ODO button once it starts to show zeros, then flip the key back to the “off” position.
- Verify that the odometer’s (ODO) total mileage displaytypically the ‘A’ displayis on.
What ‘MAINT REQD’ Means
Within 5000 miles of the last reset, the “MAINT REQD” indicator illuminates. It is merely a mileage counter meant to serve as a reminder to the user that an oil change is required and in no way indicates any system failure. If a specialist has always performed maintenance on your Toyota, they reset it after each oil change. It should be noted that the recommended oil change interval is not always 5000 miles. To find out how frequently the oil in your Camry needs to be changed, consult the owner’s manual and your usual technician.
Need Help?
Our service team would be delighted to assist you. Our entire staff of experts is Toyota-certified and adept in resolving even the most challenging problems with your Toyota. Make an appointment right away!