When your maintenance light comes on, there probably is an issue. Check everything out and make sure your automobile is road-ready before you reset anything. Follow these instructions to clear the maintenance light on your 2007 Toyota Highlander Hybrid if the lights are the only issue:
- Switch off the ignition.
- Once the entire miles is displayed, press the odometer button.
- Without starting the engine, turn the ignition to the on position.
- As you restart the ignition, press and hold the odometer button.
- Your maintenance light ought to briefly flash before going out.
Maintenance lights are not to be taken lightly. One fault with your engine could trigger serious problems like mechanical failures or even crashes! Before you reset your maintenance light, make sure everything is in working order.
Spend a few minutes with Jerry to reduce your auto insurance costs while the mechanic is looking at your vehicle. The Jerry app, a licensed broker, can help you quickly search and compare rates from more than 50 top providers. Jerry can assist you in purchasing your new plan and even in canceling your old one if you locate a lower rate.
In This Article...
How can I turn the Toyota Highlander’s maintenance light back on?
Toyota Highlander Maintenance Light Reset Press the odometer button on your dashboard quickly, hold it there while turning the key to the second position. Hold the odometer button down for another 10 seconds or so. You can hear a beeping noise in addition to the maintenance light beginning to flash. The light ought should thereafter go out.
How can I turn off my Toyota’s maintenance light?
Turn the key to position two while pressing and holding the odometer button on the dashboard. When the maintenance light begins to flash, keep holding the odometer button. There may even be beeping sounds. The light ought to dim.
What does the Toyota Highlander’s maintenance required light mean?
Simply put, the flashing maintenance required light is alerting you that maintenance on your car is necessary. The indicator will come on when a predetermined period of time has passed since your car’s last service or based on how far you’ve driven it.
This light typically indicates that you should change the oil in your car. The maintenance data will be reset for you when your car has been taken in for service.
To manually reset the system to turn off the light, however, follow these instructions:
When the maintenance light comes on, you can continue to drive, but bear in mind that you are doing so at your own risk if the required or scheduled repair is skipped.
What does the triangle in a Toyota Highlander with the exclamation point mean?
Have you ever been operating your Toyota Highlander when a symbol suddenly appeared on the dashboard? If so, then every sign has a unique meaning. Everybody occasionally gets a visit from a dashboard light.
While some lights are only indicators, others are alarms indicating your Highlander requires regular upkeep or repairs. It’s crucial to understand what each dashboard light on your vehicle indicates.
An indication light is any light that appears on the Toyota Highlander’s dashboard and is either blue or green. A light that alerts you that anything in your car is on is what an indicator light does exactly as it sounds. The majority of the time, it indicates on your dashboard whether a Highlander feature has been activated or canceled.
Some of the typical warning lights that you might see are listed below:
- An emblem in the shape of a key will display on your Toyota Highlander’s dashboard to let you know that the security system is operating as intended.
- The VSC/TRAC OFF Indicator shows whether the traction control or vehicle stability control systems are activated or off. To turn off the light, push and hold the switch while the car is still moving.
- Turn Signal Indicator: These green lights signify that the Highlander’s right or left turn signal has been engaged.
- An icon resembling a speedometer serves as a visual cue that the cruise control system is engaged.
- TRAC OFF Indicator: This light appears to alert you to the need to turn off the vehicle’s traction control and/or stability control systems.
- Headlight High Beam Indicator: This blue light signifies the active state of the headlight high beams.
Your Toyota Highlander will have a warning light if it has a yellow or red light. A warning light is typically an issue that needs to be resolved right away in order to keep your SUV in the finest condition possible. If you notice any of the lights listed below, get in touch with our service staff to arrange a visit:
- Electric Power Steering (EPS) Warning Light: It’s critical to have your Highlander evaluated if this warning light, which looks like a steering wheel next to an exclamation point, comes on your dashboard.
- Master Warning Light: When the master warning system detects a problem, a triangle with an exclamation point inside of it shows on the dashboard and a buzzer sounds.
- When an icon resembling an old-fashioned oil can appears, it means your oil pressure is too low and should be checked. Low Engine Oil Pressure Warning Light: You should take immediate action to address this problem in order to prevent potential engine damage.
How can you turn a 2008 Toyota Highlander’s tire pressure light back on?
1) As stated on the tire and loading information label, set the tires to the prescribed (cold) pressures. 2) Switch the ignition on. 3) When the tire pressure warning light blinks three times, press and hold the tire pressure warning reset switch for at least three seconds (one second on, one second off).
Why, after an oil change, is my maintenance required light still on?
Every 4,500 miles, once the maintenance has been reset, the light turns on for around 3 seconds before flashing for approximately 15 seconds. The majority of the time, this merely indicates that your car may need an oil change. After the maintenance data has been reset, the light will turn on and stay on if more than 5,000 miles have been driven.
How to Reset Maintenance Data on Toyota Corolla
You can easily reset your maintenance data. After the necessary maintenance has been carried out in accordance with the maintenance schedule, proceed as follows:
1. Switch the “engine start/stop switch or trip meter-activated engine shutoff a reading appeared,
2. Turn the trip meter reset switch while pressing the “engine switch ON, engine START STOP switch, etc.
3. Hold the button down while continuing to push it until the trip meter reads 000000.
When you understand what each warning light on your Toyota indicates, maintaining it is easy. Never be afraid to call the service staff at Toyota Palo Alto if you ever wonder whether your car needs any type of maintenance. You can ask our helpful staff for assistance in determining what’s wrong with your car and whether you need to schedule a service appointment.
Why does my Toyota state it needs maintenance?
- Turn the key in the ignition while maintaining pressure on the ODO button. till the dash lights turn on. Avoid starting the car.
- If the car is on, turn it off.
- Verify that the odometer’s (ODO) total mileage displaytypically the ‘A’ displayis on.
- The ODO display will briefly flash before beginning to display only zeros.
- Now the light will read “MAINT REQD.”
- Press and hold the ODO reset / readout button while the engine is off.
- Release the ODO button once it starts to show zeros, then flip the key back to the “off” position.
What ‘MAINT REQD’ Means
Within 5000 miles of the last reset, the “MAINT REQD” indicator illuminates. It is merely a mileage counter meant to serve as a reminder to the user that an oil change is required and in no way indicates any system failure. If a specialist has always performed maintenance on your Toyota, they reset it after each oil change. It should be noted that the recommended oil change interval is not always 5000 miles. To find out how frequently the oil in your Camry needs to be changed, consult the owner’s manual and your usual technician.
Need Help?
Our service team would be delighted to assist you. Our entire staff of experts is Toyota-certified and adept in resolving even the most challenging problems with your Toyota. Make an appointment right away!
My maintenance is necessary light is on, why?
The mileage is the only factor that activates the maintenance required light, also known as the service required light. When this light turns on, different automakers have varying standards. For instance, the maintenance needed light on a car might turn on once every 10,000 lights and stay lit until it is manually turned off.
The oil change, spark plug replacement, new tire, etc. are just a few examples of the routine maintenance that should be performed on a vehicle.
When servicing your vehicle, mechanics typically reset the maintenance required light. The process for resetting the maintenance required light differs based on the make and type of the car, yet, if they don’t, you can do it yourself.