For many years, Toyota automobiles have utilized a standardized procedure to turn off the maintenance-needed indicator. The light is intended to blink on the instrument panel at 4,500 miles to alert the owner or driver that it’s time to replenish the oil and filter (plus inspect and replace other components at the respective mileage interval). The LED stops blinking after 5,000 miles and stays on until it is reset. After an oil change, the light must be reset to notify the owner when the next oil change is required.
In This Article...
Step 3
When the real odometer reading appears, press the reset odometer button. The actual odometer setting will be displayed after the FJ Cruiser displays “Trip A” and “Trip B.”
Step 4
Turn the ignition key one more click forward while keeping the odometer reset button down with one hand. Without the engine running, this position will turn on all of the electrical fixtures and the instrument panel lights.
Step 6
Let release of the odometer reset button once six zeros have replaced the vanished dashes.
Start the FJ Cruiser’s engine to make sure the instrument panel’s maintenance required light isn’t still on. Perform the reset sequence once more if it is still the case.
How can I turn off the Toyota maintenance is required light?
Turn the key to position two while pressing and holding the odometer button on the dashboard. When the maintenance light begins to flash, keep holding the odometer button. There may even be beeping sounds. The light ought to dim.
Why, after an oil change, is my maintenance required light still on?
Every 4,500 miles, once the maintenance has been reset, the light turns on for around 3 seconds before flashing for approximately 15 seconds. The majority of the time, this merely indicates that your car may need an oil change. After the maintenance data has been reset, the light will turn on and stay on if more than 5,000 miles have been driven.
How to Reset Maintenance Data on Toyota Corolla
You can easily reset your maintenance data. After the necessary maintenance has been carried out in accordance with the maintenance schedule, proceed as follows:
1. Switch the “engine start/stop switch or trip meter-activated engine shutoff a reading appeared,
2. Turn the trip meter reset switch while pressing the “engine switch ON, engine START STOP switch, etc.
3. Hold the button down while continuing to push it until the trip meter reads 000000.
When you understand what each warning light on your Toyota indicates, maintaining it is easy. Never be afraid to call the service staff at Toyota Palo Alto if you ever wonder whether your car needs any type of maintenance. You can ask our helpful staff for assistance in determining what’s wrong with your car and whether you need to schedule a service appointment.
How often should I have my FJ Cruiser’s oil changed?
Toyota advises changing the oil and oil filter in your FJ Cruiser every six months or 5,000 kilometers (depending on vehicle year and oil type).
You will need a flat area, a container to catch the used oil, enough fresh oil to fill the container, a new oil filter, and an oil filter wrench to remove the old one in order to change your oil.
changing the oil
- Find a good spot to park the FJ first. After that, engage the parking brake.
- Next, check the oil drain plug that is situated beneath the engine. You should hoist your FJ into the air using a jack and jack stands so that you have easy access to this plug.
- Using a socket wrench, remove the oil drain plug, making sure the old oil collection mechanism is below the plug. Wait until all of the oil has released itself.
- Locate your oil filter next, then remove and replace it with an oil filter wrench.
- The oil drain plug should then be replaced, being careful to hand-start it and not cross-thread the bolt.
- The new engine oil should then be poured into the engine through the opening on top.
- once the appropriate quantity of oil has been applied. Your FJ Cruiser should be started and left running for a while.
- Check your oil dipstick after turning off your FJ to make sure the engine has the appropriate amount of oil. Additionally, check for leaks on the floor beneath the engine.
Although changing your engine oil is a relatively simple procedure, it is essential to ensure that your car is performing at its best.
Why does my Toyota state it needs maintenance?
- The ODO display will briefly flash before beginning to display only zeros.
- Turn the key in the ignition while maintaining pressure on the ODO button. till the dash lights turn on. Avoid starting the car.
- Verify that the odometer’s (ODO) total mileage displaytypically the ‘A’ displayis on.
- Release the ODO button once it starts to show zeros, then flip the key back to the “off” position.
- Now the light will read “MAINT REQD.”
- If the car is on, turn it off.
- Press and hold the ODO reset / readout button while the engine is off.
What ‘MAINT REQD’ Means
Within 5000 miles of the last reset, the “MAINT REQD” indicator illuminates. It is merely a mileage counter meant to serve as a reminder to the user that an oil change is required and in no way indicates any system failure. If a specialist has always performed maintenance on your Toyota, they reset it after each oil change. It should be noted that the recommended oil change interval is not always 5000 miles. To find out how frequently the oil in your Camry needs to be changed, consult the owner’s manual and your usual technician.
Need Help?
Our service team would be delighted to assist you. Our entire staff of experts is Toyota-certified and adept in resolving even the most challenging problems with your Toyota. Make an appointment right away!
How can you turn a Toyota’s oil change light back on?
Turn your key to the second position after pressing and holding the trip meter reset button on the dashboard. Hold the odometer button down for a total of 10 seconds. The light ought to flash, potentially beep, and then go off as a result. Release the odometer button once it has been turned off, then start the automobile.
How can I turn off the dashboard alert lights?
You can start by shutting off the automobile and starting it again. The next step is to unplug your battery, wait a short while, and then plug it back in. Another choice is to keep driving and wait for the light to automatically reset.
After an oil change, how do I turn off the maintenance light?
In order to start the car, turn the ignition to position one after inserting your key. Turn your key to position two after pressing and holding the trip meter reset button on the dashboard. Hold the odometer button down for a further ten seconds. The light should then begin to flash and potentially beep before turning off.
How is the oil light reset after an oil change?
Reset Oil Change Indicator
- Turn on the ignition.
- Both the stop and accelerator pedals should be fully depressed.
- Maintain firm pressure on the brake and accelerator pedals.
- A notice verifying the reset process is ongoing appears after three seconds.
How should I respond if my maintenance light illuminates?
How Can the Maintenance Required Light Be Reset?
- Turn on your car. Look at your dashboard when your key is in the on position.
- Press the Trip Meter Reset Button after turning off the engine.
- Re-start the vehicle.
- Keep pressing the reset button.
- Reset button released
When I turn on my automobile, why does the maintenance required light flash?
If you’re unsure of what a warning light on your dashboard indicates, it can make you feel uneasy. Thankfully, you normally don’t need to worry about it.
A flashing maintenance light is typically your car’s method of telling you that it needs to be serviced soon. The light’s purpose is to alert drivers when it might be time for an oil change or a tune-up by turning on at predetermined intervals.
You have roughly 500 miles left before you need to have your automobile serviced when the light first starts flashing. Your maintenance light will inform you by turning on and staying on when it’s due for service.
Download Jerry, the super insurance expert app, to find the answers to all of your maintenance-related concerns.
Jerry is a powerful tool for finding vehicle insurance discounts, and it can do so in just 45 seconds! Jerry will evaluate prices from the leading insurance companies in the country to get you the cheapest offers, and if you decide to transfer, he can even cancel your current policy!
What does a “upkeep necessary” light signify?
Simply put, the flashing maintenance required light is alerting you that maintenance on your car is necessary. The indicator will come on when a predetermined period of time has passed since your car’s last service or based on how far you’ve driven it.
This light typically indicates that you should change the oil in your car. The maintenance data will be reset for you when your car has been taken in for service.
To manually reset the system to turn off the light, however, follow these instructions:
When the maintenance light comes on, you can continue to drive, but bear in mind that you are doing so at your own risk if the required or scheduled repair is skipped.
For a FJ Cruiser, how much does an oil change cost?
Price Range for an Oil Change on a Toyota FJ Cruiser. A Toyota FJ Cruiser oil change typically costs between $159 and $174. Between $53 and $67 is the projected cost of labor, while between $107 and $108 is the estimated cost of parts.