How To Reset Maintenance Light On Toyota Corolla 2014

You must first park the 2014 Toyota Corolla in a secure location that is out of the way in order to reset the oil light. Without actually starting the car, turn the key to the “on” position. The trip button or stick must then be located on the instrument display and pressed until “travel A” is shown. After completing that, you must switch the ignition off. The key must then be turned to the on position without the vehicle being started while you continue to grip the trip button or stick. The message “Resetting maintenance data” will appear, and after that, everything will be reset. Following an oil change, you will need to perform this each time.

How can you turn a Toyota Corolla’s maintenance-needed light back on?

Turn the key back to the “On position after finding the “trip reset button once more. Hold the trip reset button down until your odometer lights 0 miles. The maintenance light will thereafter go out.

What does a 2014 Toyota Corolla “maintenance necessary” mean?

On your dashboard, the Toyota maintenance light may read “MAINT REQD. It’s a light that is always on and alerts you when you require an oil change at a licensed auto shop. Your Toyota will run more smoothly and efficiently if you change the oil in your car.

How is the oil level checked in a 2014 Toyota Corolla?

20142019 Oil Level Check Corolla S 1.8L 4 Cyl. Toyota

  • Remove Dipstick – Find the oil dipstick, take it out, and clean it.
  • Reinstall the dipstick, take it out, and then check the oil level.
  • More Information – More details regarding the oil level.

What should I do to remove the maintenance is required light?

How do I turn the “Maint Reqd” light back on?

  • Switch the ignition to the ON position.
  • Set the trip display to TRIP A mode on the odometer.
  • Activate the OFF position on the ignition switch.
  • Turn the ignition switch to the ON position while pressing and holding the Trip Meter RESET button.
  • It will do so via the service maintenance reminder light.

Why, after an oil change, is my maintenance required light still on?

Every 4,500 miles, once the maintenance has been reset, the light turns on for around 3 seconds before flashing for approximately 15 seconds. The majority of the time, this merely indicates that your car may need an oil change. After the maintenance data has been reset, the light will turn on and stay on if more than 5,000 miles have been driven.

How to Reset Maintenance Data on Toyota Corolla

You can easily reset your maintenance data. After the necessary maintenance has been carried out in accordance with the maintenance schedule, proceed as follows:

1. Switch the “engine start/stop switch or trip meter-activated engine shutoff a reading appeared,

2. Turn the trip meter reset switch while pressing the “engine switch ON, engine START STOP switch, etc.

3. Hold the button down while continuing to push it until the trip meter reads 000000.

When you understand what each warning light on your Toyota indicates, maintaining it is easy. Never be afraid to call the service staff at Toyota Palo Alto if you ever wonder whether your car needs any type of maintenance. You can ask our helpful staff for assistance in determining what’s wrong with your car and whether you need to schedule a service appointment.

Why does the maintenance required message on my Toyota Corolla?

  • The ODO display will briefly flash before beginning to display only zeros.
  • Release the ODO button once it starts to show zeros, then flip the key back to the “off” position.
  • Verify that the odometer’s (ODO) total mileage displaytypically the ‘A’ displayis on.
  • If the car is on, turn it off.
  • Turn the key in the ignition while maintaining pressure on the ODO button. till the dash lights turn on. Avoid starting the car.
  • Now the light will read “MAINT REQD.”
  • Press and hold the ODO reset / readout button while the engine is off.

What ‘MAINT REQD’ Means

Within 5000 miles of the last reset, the “MAINT REQD” indicator illuminates. It is merely a mileage counter meant to serve as a reminder to the user that an oil change is required and in no way indicates any system failure. If a specialist has always performed maintenance on your Toyota, they reset it after each oil change. It should be noted that the recommended oil change interval is not always 5000 miles. To find out how frequently the oil in your Camry needs to be changed, consult the owner’s manual and your usual technician.

Need Help?

Our service team would be delighted to assist you. Our entire staff of experts is Toyota-certified and adept in resolving even the most challenging problems with your Toyota. Make an appointment right away!

How can my Toyota maintenance be reset?

In order to start the car, turn the ignition to position one after inserting your key. Turn your key to position two after pressing and holding the trip meter reset button on the dashboard. Hold the odometer button down for a further ten seconds. The light should then begin to flash and potentially beep before turning off.

How often should an oil change be performed on a 2014 Toyota Corolla?

Toyota suggests changing the oil and filter in your 2014 Toyota Corolla every 3,000 to 5,000 miles, but it’s important to consult your owner’s manual and your dealer to determine the intervals that are right for your car.

What does “maintenance necessary” on my car mean?

The mileage is the only factor that activates the maintenance required light, also known as the service required light. When this light turns on, different automakers have varying standards. For instance, the maintenance needed light on a car might turn on once every 10,000 lights and stay lit until it is manually turned off.

The oil change, spark plug replacement, new tire, etc. are just a few examples of the routine maintenance that should be performed on a vehicle.

When servicing your vehicle, mechanics typically reset the maintenance required light. The process for resetting the maintenance required light differs based on the make and type of the car, yet, if they don’t, you can do it yourself.

An oil change for a 2014 Toyota Corolla costs how much?

Online now to make an appointment for an oil change on your 2014 Toyota Corolla! Regular oil costs $31.45, Regular oil costs $41.45, Regular oil costs $51.45, Full synthetic oil costs $34.95, Regular oil costs $49.95, Full synthetic oil costs $59.95.

On a 2014 Toyota RAV4, how do you turn the maintenance light back on?

How to Extinguish the Toyota RAV4’s Maintenance Light

  • Put the ignition on with your key. Turn the key to the first position.
  • On the dashboard, press the reset trip meter button. Hold it down for a couple of seconds.
  • Hold the odometer button down for another five or so seconds.
  • Release the odometer button after it is off.

Why does my Toyota’s maintenance indicator constantly flashing?

Toyota’s maintenance reminder system only serves to remind the motorist to have their car’s oil changed. The engine light will turn on after 5,000 miles of driving since the computer counts the engine’s mileage from the time it was reset. The system does not account for the changes between mild and extreme driving situations, load weight, towing, or weather conditions, all of which are significant factors that affect oil life because it is not algorithm driven, unlike other more sophisticated maintenance reminder systems.

Because of this, people who regularly tow or drive in adverse weather conditions and require more frequent oil changes may find the maintenance light ineffective. However, for individuals who frequently use the motorway in good weather, it might not be practical. This is not to suggest that a driver should completely ignore the maintenance light. Keep an eye on your driving circumstances throughout the year and, if necessary, have a professional assess your unique, most frequent driving conditions to determine whether or not your car need servicing.

The table below can help you estimate how frequently you would need to change the oil in a current car (earlier cars typically require more regular oil changes):

Can I drive my automobile even though it needs maintenance?

Simply put, the flashing maintenance required light is alerting you that maintenance on your car is necessary. The indicator will come on when a predetermined period of time has passed since your car’s last service or based on how far you’ve driven it.

This light typically indicates that you should change the oil in your car. The maintenance data will be reset for you when your car has been taken in for service.

To manually reset the system to turn off the light, however, follow these instructions:

When the maintenance light comes on, you can continue to drive, but bear in mind that you are doing so at your own risk if the required or scheduled repair is skipped.

Why is the maintenance required indicator on my car flashing?

If you’re unsure of what a warning light on your dashboard indicates, it can make you feel uneasy. Thankfully, you normally don’t need to worry about it.

A flashing maintenance light is typically your car’s method of telling you that it needs to be serviced soon. The light’s purpose is to alert drivers when it might be time for an oil change or a tune-up by turning on at predetermined intervals.

You have roughly 500 miles left before you need to have your automobile serviced when the light first starts flashing. Your maintenance light will inform you by turning on and staying on when it’s due for service.

Download Jerry, the super insurance expert app, to find the answers to all of your maintenance-related concerns.

Jerry is a powerful tool for finding vehicle insurance discounts, and it can do so in just 45 seconds! Jerry will evaluate prices from the leading insurance companies in the country to get you the cheapest offers, and if you decide to transfer, he can even cancel your current policy!