When it’s time to replace the oil and filter, the 2007 Toyota Corolla’s “maintenance necessary” light will illuminate. Based on the distance traveled since it was last adjusted, the light trips. You will have to reset the light yourself if you change your own oil or if the service technician forgets to do so. Most drivers should be able to complete this straightforward assignment in about five minutes.
In This Article...
Step 5
Await the odometer to complete one cycle. A string of zeros will be followed by a string of dashes. The dash line will get shorter and disappear as it cycles. Release the trip selector button once there are no more dashes. The maintenance-needed light will stop working.
- Toyota Motor Corporation, “2007 Toyota Corolla Owners Manual,”
- Starter key
How can I turn off the Toyota Corolla’s maintenance is required light?
Turn the key back to the “On position after finding the “trip reset button once more. Hold the trip reset button down until your odometer lights 0 miles. The maintenance light will thereafter go out.
How can you turn off the Toyota’s maintenance needed light?
In order to start the car, turn the ignition to position one after inserting your key. Turn your key to position two after pressing and holding the trip meter reset button on the dashboard. Hold the odometer button down for a further ten seconds. The light should then begin to flash and potentially beep before turning off.
How can I dim the maintenance is necessary light?
How do I turn the “Maint Reqd” light back on?
- Switch the ignition to the ON position.
- Set the trip display to TRIP A mode on the odometer.
- Activate the OFF position on the ignition switch.
- Turn the ignition switch to the ON position while pressing and holding the Trip Meter RESET button.
- It will do so via the service maintenance reminder light.
What does a 2006 Toyota Corolla’s maintenance light mean?
On your dashboard, the Toyota maintenance light may read “MAINT REQD. It’s a light that is always on and alerts you when you require an oil change at a licensed auto shop. Your Toyota will run more smoothly and efficiently if you change the oil in your car.
Why does my maintenance light come on after I change the oil?
- Turn the key in the ignition while maintaining pressure on the ODO button. till the dash lights turn on. Avoid starting the car.
- The ODO display will briefly flash before beginning to display only zeros.
- Press and hold the ODO reset / readout button while the engine is off.
- Verify that the odometer’s (ODO) total mileage displaytypically the ‘A’ displayis on.
- If the car is on, turn it off.
- Now the light will read “MAINT REQD.”
- Release the ODO button once it starts to show zeros, then flip the key back to the “off” position.
What ‘MAINT REQD’ Means
Within 5000 miles of the last reset, the “MAINT REQD” indicator illuminates. It is merely a mileage counter meant to serve as a reminder to the user that an oil change is required and in no way indicates any system failure. If a specialist has always performed maintenance on your Toyota, they reset it after each oil change. It should be noted that the recommended oil change interval is not always 5000 miles. To find out how frequently the oil in your Camry needs to be changed, consult the owner’s manual and your usual technician.
Need Help?
Our service team would be delighted to assist you. Our entire staff of experts is Toyota-certified and adept in resolving even the most challenging problems with your Toyota. Make an appointment right away!
My maintenance is necessary light is on, why?
The mileage is the only factor that activates the maintenance required light, also known as the service required light. When this light turns on, different automakers have varying standards. For instance, the maintenance needed light on a car might turn on once every 10,000 lights and stay lit until it is manually turned off.
The oil change, spark plug replacement, new tire, etc. are just a few examples of the routine maintenance that should be performed on a vehicle.
When servicing your vehicle, mechanics typically reset the maintenance required light. The process for resetting the maintenance required light differs based on the make and type of the car, yet, if they don’t, you can do it yourself.
What does it imply if your Toyota has a maintenance required light on?
Simply put, the flashing maintenance required light is alerting you that maintenance on your car is necessary. The indicator will come on when a predetermined period of time has passed since your car’s last service or based on how far you’ve driven it.
This light typically indicates that you should change the oil in your car. The maintenance data will be reset for you when your car has been taken in for service.
To manually reset the system to turn off the light, however, follow these instructions:
When the maintenance light comes on, you can continue to drive, but bear in mind that you are doing so at your own risk if the required or scheduled repair is skipped.
On a 2005 Toyota Tundra, how do you turn off the maintenance is necessary light?
- Without starting the engine, turn the ignition to the “On position. If your car has a push-button ignition, press “Start” without depressing the brake pedal.
- By pushing the display change button or “Trip button,” you can change the display to “Trip A.”
- Completely shut off the car.
- Keep holding down the “Trip button.”
- Hold the “Trip button down while turning the ignition to “On without starting the car.
- Release the “Trip button” whenever the trip meter reads “all zeros.”
Why does the Toyota Corolla’s maintenance required light come on?
Every 4,500 miles, once the maintenance has been reset, the light turns on for around 3 seconds before flashing for approximately 15 seconds. The majority of the time, this merely indicates that your car may need an oil change. After the maintenance data has been reset, the light will turn on and stay on if more than 5,000 miles have been driven.
How to Reset Maintenance Data on Toyota Corolla
You can easily reset your maintenance data. After the necessary maintenance has been carried out in accordance with the maintenance schedule, proceed as follows:
1. Switch the “engine start/stop switch or trip meter-activated engine shutoff a reading appeared,
2. Turn the trip meter reset switch while pressing the “engine switch ON, engine START STOP switch, etc.
3. Hold the button down while continuing to push it until the trip meter reads 000000.
When you understand what each warning light on your Toyota indicates, maintaining it is easy. Never be afraid to call the service staff at Toyota Palo Alto if you ever wonder whether your car needs any type of maintenance. You can ask our helpful staff for assistance in determining what’s wrong with your car and whether you need to schedule a service appointment.
How far can you go once your maintenance light illuminates?
The oil light suddenly came on. You’re clueless as to why. And to make matters worse, you don’t really have a lot of time right now to worry about it.
How long can you drive with this object is in your face, you ponder. wonderful question We’ll respond to it and explain why it could have initially surfaced. Move along!
How Long Can You Drive With Oil Light On?
If the oil light comes on, you should try to get a repair to look at your car as soon as possible. However, keep in mind that a little more driving around won’t harm anything.
Typically, it takes about two weeks or 500 miles of driving before a flashing oil light becomes a serious issue. However, once that happens, things can quickly deteriorate and cause significant mechanical damage. Therefore, attempt to get your car serviced as soon as possible.
There’s Not Enough Oil in the Car
Numerous issues, including blown head gaskets and broken valves, can cause engines to leak oil. Whatever the case, if oil leaks from your car, it will begin to suffer and may eventually sustain catastrophic damage. As a result, the oil light will turn on when there isn’t enough oil in the vehicle.
The Vehicle’s Oil Pressure Is Low
A vehicle needs enough oil pressure to operate at peak performance. However, keep in mind that a number of things (such as an obstructed oil filter, a broken pressure gauge, insufficient engine oil, etc.) could cause the oil pressure to go too low. This will cause the oil light to come on.
The Oil Pressure Sensor is Malfunctioning
The malfunction of your oil pressure sensor may also cause your oil light to come on. Randomly, this happens, usually as a result of normal wear and tear. If the problem is not corrected, your car won’t have enough oil pressure, which will eventually cause more harm.
The Oil Pump Is Bad
A car’s oil pump may eventually fail as a result of wear and tear on the vehicle. The oil light will unquestionably respond to this. The only option at that point would be to replace the pump since if you don’t, your engine would experience increased friction and end its life much earlier than it should.
Is Your Oil Light Still On?
We have a group of expert vehicle repair specialists who will locate the cause of your check engine light before taking steps to fix it.