Okay, in this section, I’ll walk you through the process of turning off the maintenance is necessary light on a 2019 Toyota Camry XV70. Simple and uncomplicated. To do this, we’ll use the steering wheel’s directional pad. Let’s do it now.
In This Article...
Position your car in drive without turning the key
Press the START/STOP button twice without applying the brake if your vehicle has one.
Access the Settings
Find the Settings menu by using the steering wheel’s directional pad to navigate the menu.
the VEHICLE SETTINGS section.
In the settings menu, locate the Vehicle Settings menu. This menu has a car emblem with a tiny gear on it for Camry with a 7-inch display.
- Hit the OK button.
- Opt for SCHEDULED MAINTENANCE.
- Choose “YES”
You’ll be prompted to select Reset Data. Then you’ll choose “yes,” which will finish the reset.
On a Toyota Camry, how do you reset the maintenance light?
Push and hold the odometer button on your dashboard briefly, then quickly turn your key to the second position. Hold the odometer button down for a further 10 seconds. The maintenance light should flash and you could hear a beeping if everything is done correctly. Your Toyota Camry’s maintenance light ought to go out after doing that.
How can my Toyota maintenance be reset?
In order to start the car, turn the ignition to position one after inserting your key. Turn your key to position two after pressing and holding the trip meter reset button on the dashboard. Hold the odometer button down for a further ten seconds. The light should then begin to flash and potentially beep before turning off.
What should I do to remove the maintenance is required light?
How do I turn the “Maint Reqd” light back on?
- Switch the ignition to the ON position.
- Set the trip display to TRIP A mode on the odometer.
- Activate the OFF position on the ignition switch.
- Turn the ignition switch to the ON position while pressing and holding the Trip Meter RESET button.
- It will do so via the service maintenance reminder light.
How can the maintenance needed light on a 2018 Toyota Sienna be reset?
Don’t worry; it’s a simple fix, and our wife won’t know the difference! By doing the following, you can clear the maintenance light on your 2018 Toyota Sienna:
- To confirm your selection, click YES when prompted.
- Set your ignition to ON while your car is in park. All of the lights in your automobile will be turned on, but the engine won’t start. Push the start button twice without applying the brake if your Sienna has one.
- By clicking OK, select MAINTENANCE RESET.
- Using the navigation buttons on the right side of your steering wheel, locate the Settings menu.
- The oil light should be off when you start your automobile.
If the indicator continues to illuminate, your car might be having trouble. Perhaps your wife accidently moved the sensor, or perhaps there is a completely separate issue. In either case, it’s a good idea to consult an expert to make sure your automobile is secure, particularly if the light comes back on.
Why not take a moment to make sure your automobile is covered by a reliable insurance policy while you’re learning more about it? Using the Jerry app, finding the best insurance is quick and easy. Download the app, then select from a wide selection of free quotes after quickly answering a few questions. Jerry drivers save $879 annually on auto insurance.
How can the oil life on a 2018 Toyota Camry be checked?
How to Check Your Car’s Oil Levels
- Place the car on a level surface. Before opening the hood, give the engine some time to cool.
- Find the oil dipstick, remove it, and clean it.
- Draw out the dipstick once more after fully re-inserting it.
- Examine the oil level.
Why, after an oil change, is my maintenance required light still on?
Every 4,500 miles, once the maintenance has been reset, the light turns on for around 3 seconds before flashing for approximately 15 seconds. The majority of the time, this merely indicates that your car may need an oil change. After the maintenance data has been reset, the light will turn on and stay on if more than 5,000 miles have been driven.
How to Reset Maintenance Data on Toyota Corolla
You can easily reset your maintenance data. After the necessary maintenance has been carried out in accordance with the maintenance schedule, proceed as follows:
1. Switch the “engine start/stop switch or trip meter-activated engine shutoff a reading appeared,
2. Turn the trip meter reset switch while pressing the “engine switch ON, engine START STOP switch, etc.
3. Hold the button down while continuing to push it until the trip meter reads 000000.
When you understand what each warning light on your Toyota indicates, maintaining it is easy. Never be afraid to call the service staff at Toyota Palo Alto if you ever wonder whether your car needs any type of maintenance. You can ask our helpful staff for assistance in determining what’s wrong with your car and whether you need to schedule a service appointment.
Why is my Toyota Camry’s maintenance light on?
- Release the ODO button once it starts to show zeros, then flip the key back to the “off” position.
- Now the light will read “MAINT REQD.”
- The ODO display will briefly flash before beginning to display only zeros.
- Press and hold the ODO reset / readout button while the engine is off.
- Verify that the odometer’s (ODO) total mileage displaytypically the ‘A’ displayis on.
- If the car is on, turn it off.
- Turn the key in the ignition while maintaining pressure on the ODO button. till the dash lights turn on. Avoid starting the car.
What ‘MAINT REQD’ Means
Within 5000 miles of the last reset, the “MAINT REQD” indicator illuminates. It is merely a mileage counter meant to serve as a reminder to the user that an oil change is required and in no way indicates any system failure. If a specialist has always performed maintenance on your Toyota, they reset it after each oil change. It should be noted that the recommended oil change interval is not always 5000 miles. To find out how frequently the oil in your Camry needs to be changed, consult the owner’s manual and your usual technician.
Need Help?
Our service team would be delighted to assist you. Our entire staff of experts is Toyota-certified and adept in resolving even the most challenging problems with your Toyota. Make an appointment right away!
What happens after I change the oil in my car?
Reset Oil Change Indicator
- Turn on the ignition.
- Both the stop and accelerator pedals should be fully depressed.
- Maintain firm pressure on the brake and accelerator pedals.
- A notice verifying the reset process is ongoing appears after three seconds.
My maintenance is necessary light is on, why?
The mileage is the only factor that activates the maintenance required light, also known as the service required light. When this light turns on, different automakers have varying standards. For instance, the maintenance needed light on a car might turn on once every 10,000 lights and stay lit until it is manually turned off.
The oil change, spark plug replacement, new tire, etc. are just a few examples of the routine maintenance that should be performed on a vehicle.
When servicing your vehicle, mechanics typically reset the maintenance required light. The process for resetting the maintenance required light differs based on the make and type of the car, yet, if they don’t, you can do it yourself.
What does it imply if your Toyota has a maintenance required light on?
On your dashboard, the Toyota maintenance light may read “MAINT REQD. It’s a light that is always on and alerts you when you require an oil change at a licensed auto shop. Your Toyota will run more smoothly and efficiently if you change the oil in your car.