Turn the ignition key to the “ACC” or “LOCK” position before attempting to reset the maintenance light on your Toyota Avalon. Hold down the trip meter reset knob (located next to the odometer on your Toyota Avalon). Turn the ignition to “ON” while holding the trip meter reset knob, but do not start your Toyota Avalon. Keep pressing the meter reset button until the MAINT REQD light goes off. Press the start button once if your ignition is a FOB (fob-operated ignition). While pressing the start button, push and hold the odometer reset button. The MAINT REQD indicator light should be reset, and this should be shown on the screen. During this reset process, be careful not to press on any other vehicle controls, particularly the pedals.
Put the key in the “acc” or “lock” position to turn off the maintenance light on a Toyota Avalon. Press and hold the reset nob for the trip meter. Turn the ignition to “on,” but do not start the car, while still holding the trip meter reset knob. Hold the meter reset in place until the maintenance required light goes out.
In This Article...
How can the maintenance needed light be turned off on a 2011 Toyota Avalon?
1. Switch on the engine (one position before starting engine).
2. Verify the displayed odometer reading. Turn off the ignition.
vehicle keyless entry systems:
3.Press “ENGINE START STOP” switch to IGNITION ON mode while pushing the trip meter reset button. Hold down the button while continuing to press it until “000000” appears on the trip meter.
Automobiles without a smart key system:
3.Start the ignition while pressing the trip meter reset button (one position before starting engine). Hold down the button while continuing to press it until “000000” appears on the trip meter.
4. To make sure the indicator has been reset, turn off the ignition and start the engine.
What does the Toyota Avalon’s maintenance required light mean?
Toyota Maintenance Required Light: This light illuminates to notify you that your oil needs to be changed. 5,000 miles after the last reset, it turns on.
This light only turns on as a result of those miles; it has no means of knowing if your oil has been changed or not since then, and it never, ever indicates a problem.
When changing the oil, shops occasionally forget to reset the maintenance-required meter if the light isn’t yet on. Simply said, many quick-lube businesses are unable to reset it.
Resetting the maintenance needed light is simple. On most Toyotas, you can just:
- Back off the key after that.
- A key is turned to the on position.
- Now press and hold the trip meter reset button. (Same button as for switching between the trip meters and the odometer.)
- Next, check to see if the odometer reading is visible. (On some models, the trip-meter is included.) “A that you desire to be visible.)
- Turn the key back to the “on position, but not all the way to the “start position, while keeping the reset button down. There should be a string of dashes on the odometer display that gradually vanish. A string of zeros will appear after they have all vanished. Hold the reset button down while waiting for the trip meter’s (or the odometer’s) zeros to disappear “A) Reading comes back.
The car should now be counting down to the next 5,000 interval, at which point the maintenance-required signal will turn back on.
What should I do to remove the maintenance is required light?
How do I turn the “Maint Reqd” light back on?
- Switch the ignition to the ON position.
- Set the trip display to TRIP A mode on the odometer.
- Activate the OFF position on the ignition switch.
- Turn the ignition switch to the ON position while pressing and holding the Trip Meter RESET button.
- It will do so via the service maintenance reminder light.
Why does my maintenance light come on after I change the oil?
- Release the ODO button once it starts to show zeros, then flip the key back to the “off” position.
- Now the light will read “MAINT REQD.”
- Verify that the odometer’s (ODO) total mileage displaytypically the ‘A’ displayis on.
- Turn the key in the ignition while maintaining pressure on the ODO button. till the dash lights turn on. Avoid starting the car.
- Press and hold the ODO reset / readout button while the engine is off.
- The ODO display will briefly flash before beginning to display only zeros.
- If the car is on, turn it off.
What ‘MAINT REQD’ Means
Within 5000 miles of the last reset, the “MAINT REQD” indicator illuminates. It is merely a mileage counter meant to serve as a reminder to the user that an oil change is required and in no way indicates any system failure. If a specialist has always performed maintenance on your Toyota, they reset it after each oil change. It should be noted that the recommended oil change interval is not always 5000 miles. To find out how frequently the oil in your Camry needs to be changed, consult the owner’s manual and your usual technician.
Need Help?
Our service team would be delighted to assist you. Our entire staff of experts is Toyota-certified and adept in resolving even the most challenging problems with your Toyota. Make an appointment right away!
How can the VSC light on a 2006 Toyota Avalon be reset?
Vehicle Stability Control, or VSC as it is commonly known, is the stability control system used in Toyota automobiles. By lowering or eliminating the power provided to your wheels, stability control aids in the maintenance of traction and control in your vehicle. By automatically providing brake pressure to up to three wheels, it achieves this. The system’s main objective is to keep your car traveling in the direction of its wheels. Since 2012, at least in the USA, it has become a necessary safety requirement. Naturally, VSC OFF denotes that your Toyota’s stability control is turned off.
VSC Light Easy Fix
Depending on the model year of the Toyota, a button with the same icon as the light in your gauges will be located either next to your shifter or next to your steering wheel. When you’ve found it:
- Ensure that you have come to a complete stop. If you can, put the car in park.
- For a few seconds, hold down the VSC button.
- The indicator lights for TRAC OFF and VSC OFF will turn on. Now both systems are off.
- Once more, press the VSC button. As soon as both lights go out, the systems are back in operation.
If the VSC OFF light is still on, there can be a glitch in your car’s computer or a problem with the VSC system. Bring your car to a Toyota service location near you so a qualified technician can check the codes and identify the problem. Although it is safe to drive your Toyota even with the VSC OFF light on, we advise caution, especially in bad weather.
In Need of Repair?
Bring your car to the Toyota of Arlington servicing facility if you live close to Chicago and need repairs. We can install OEM parts for you because we have access to them. Get a free estimate from our outstanding collision facility if you need body work.
The amount of oil a 2013 Toyota Avalon uses
For your 2013 Toyota, AMSOIL XL Synthetic Motor Oil is a strengthened formulation that offers more cleaning power. Superb high- and low-temperature protection, fantastic lubrication, and exceptional fuel efficiency. The XL is designed for modern vehicle technology, which incorporates direct injection and turbos. It is loaded with enhanced engine protection, allowing you to go up to 12,000 miles or one year between oil changes, whichever comes first. Discounted pricing! Buy today!
How can my Toyota maintenance be reset?
In order to start the car, turn the ignition to position one after inserting your key. Turn your key to position two after pressing and holding the trip meter reset button on the dashboard. Hold the odometer button down for a further ten seconds. The light should then begin to flash and potentially beep before turning off.
How can you turn off the Toyota Camry’s maintenance needed light?
Turn the key to position two while pressing and holding the odometer button on the dashboard. When the maintenance light begins to flash, keep holding the odometer button. There may even be beeping sounds. The light ought to dim.
The amount of oil a 2014 Toyota Avalon uses
Filtered, 6.4 quarts Check the oil level after refueling. AMSOIL OE Synthetic Motor Oil is specifically designed for the longer oil change intervals currently advised by automakers.