We will clear the maintenance needed notification on this 2015 Toyota RAV4 in this chapter. To do this, we’ll press the DISP button on the steering wheel. Thus, this is what we’re going to do:
In This Article...
Activate the ignition.
You must put the RAV4 in accessory mode in order to turn off the maintenance light. To start a push-to-start RAV4, press the START button twice while keeping your foot off the brake.
Arrive at the TRIP A screen.
When that happens, you must set your trip to TRIP A. In order to display TRIP A, press your DISP button here, and it will continue to press.
- Turn the car off.
- While replacing the key, continue to hold the DISP button.
Then, either as you are starting your car or without actually starting it, you must turn it back on while simultaneously pressing the DISP button on the steering wheel.
Hold the button down.
Keep holding it in until you see these dashes, at which point the maintenance required light on the dashboard should be off.
How can you turn a Toyota Rav4’s maintenance light back on?
How to Extinguish the Toyota RAV4’s Maintenance Light
- Put the ignition on with your key. Turn the key to the first position.
- On the dashboard, press the reset trip meter button. Hold it down for a couple of seconds.
- Hold the odometer button down for another five or so seconds.
- Release the odometer button after it is off.
How can the oil life on a 2021 Toyota Rav4 be checked?
How to Check Your Car’s Oil Levels
- Place the car on a level surface. Before opening the hood, give the engine some time to cool.
- Find the oil dipstick, remove it, and clean it.
- Draw out the dipstick once more after fully re-inserting it.
- Examine the oil level.
How can I clear the maintenance message on my Toyota?
A Toyota Maintenance Light Reset
- In order to start the car, turn the ignition to position one after inserting your key.
- Turn your key to position two after pressing and holding the trip meter reset button on the dashboard.
- Hold the odometer button down for a further ten seconds.
What does “maintenance necessary soon” on my Toyota Rav4 mean?
After 4,500 miles without a service, the Maintenance Required Light will begin to flicker, and when you reach 5,000 miles, it will stay on. This important maintenance reminder will show up as MAINT REQD on older Toyota cars.
Why does my Toyota indicate that maintenance is soon needed?
- Turn the key in the ignition while maintaining pressure on the ODO button. till the dash lights turn on. Avoid starting the car.
- Now the light will read “MAINT REQD.”
- The ODO display will briefly flash before beginning to display only zeros.
- Press and hold the ODO reset / readout button while the engine is off.
- If the car is on, turn it off.
- Release the ODO button once it starts to show zeros, then flip the key back to the “off” position.
- Verify that the odometer’s (ODO) total mileage displaytypically the ‘A’ displayis on.
What ‘MAINT REQD’ Means
Within 5000 miles of the last reset, the “MAINT REQD” indicator illuminates. It is merely a mileage counter meant to serve as a reminder to the user that an oil change is required and in no way indicates any system failure. If a specialist has always performed maintenance on your Toyota, they reset it after each oil change. It should be noted that the recommended oil change interval is not always 5000 miles. To find out how frequently the oil in your Camry needs to be changed, consult the owner’s manual and your usual technician.
Need Help?
Our service team would be delighted to assist you. Our entire staff of experts is Toyota-certified and adept in resolving even the most challenging problems with your Toyota. Make an appointment right away!
How should I respond if my maintenance light illuminates?
How Can the Maintenance Required Light Be Reset?
- Turn on your car. Look at your dashboard when your key is in the on position.
- Press the Trip Meter Reset Button after turning off the engine.
- Re-start the vehicle.
- Keep pressing the reset button.
- Reset button released
How accurate is oil life percentage?
Your neighborhood shop, which had a vested interest in keeping your automobile coming back every 5,000 kilometers, used to provide the answer to the question of when you need to replace your oil. These days, an automobile’s oil life monitoring system is increasingly routinely used to provide an answer to this query. This warning often appears between 8,000 and 13,000 kilometers, saving drivers money and lowering the amount of oil that is disposed of. How dependable are these systems, though? Oil life monitors are pretty trustworthy, according to studies, but they are not nearly as “set it and forget it” as sellers would have you believe. Continue reading to find out how to maintain your oil life monitor correctly and avoid needing to pay for expensive repairs.
What may a maintenance light be telling you?
Even the smallest elements, like dashboard lights, give each car a unique look. Knowing what each light indicates and what to do when one comes on might be challenging. While some lights are merely warnings, others are critical and must not be disregarded. By addressing the query, “What does it signify when the maintenance light is blinking in my Corolla?,” we hope to assist you better understand your Toyota warning lights.
What does the maintenance required light mean?
Other automakers don’t offer a dashboard light like the maintenance required light, which is present on Toyota automobiles (MAINT REQD). Many new Toyota drivers could mistakenly believe that this light is the check engine light, but it actually represents a completely different warning. According to the distance travelled on the vehicle’s maintenance plan, the maintenance required light alerts you that repair is necessary.
What happens after I change the oil in my car?
Reset Oil Change Indicator
- Turn on the ignition.
- Both the stop and accelerator pedals should be fully depressed.
- Maintain firm pressure on the brake and accelerator pedals.
- A notice verifying the reset process is ongoing appears after three seconds.