In This Article...
Set the run position on the ignition.
STEP 4
- Turn the ignition to the “RUN/IGNITIO ON position while pressing and holding the ODO/TRIP BUTTON knob. Holding the knob in place for at least 5 seconds will cause MAINT REQD to flash and the light to turn off.
How can the maintenance message be removed from a Toyota Camry?
Turn the key to position two while pressing and holding the odometer button on the dashboard. When the maintenance light begins to flash, keep holding the odometer button. There may even be beeping sounds. The light ought to dim.
How do I stop the needed maintenance?
How do I turn the “Maint Reqd” light back on?
- Switch the ignition to the ON position.
- Set the trip display to TRIP A mode on the odometer.
- Activate the OFF position on the ignition switch.
- Turn the ignition switch to the ON position while pressing and holding the Trip Meter RESET button.
- It will do so via the service maintenance reminder light.
How can the oil life on a 2020 Toyota Camry be checked?
How to Check Your Car’s Oil Levels
- Place the car on a level surface. Before opening the hood, give the engine some time to cool.
- Find the oil dipstick, remove it, and clean it.
- Draw out the dipstick once more after fully re-inserting it.
- Examine the oil level.
How can you turn a Toyota’s maintenance needed light back on?
In order to start the car, turn the ignition to position one after inserting your key. Turn your key to position two after pressing and holding the trip meter reset button on the dashboard. Hold the odometer button down for a further ten seconds. The light should then begin to flash and potentially beep before turning off.
Why does the maintenance required message on my Toyota Camry?
- Press and hold the ODO reset / readout button while the engine is off.
- Now the light will read “MAINT REQD.”
- The ODO display will briefly flash before beginning to display only zeros.
- Verify that the odometer’s (ODO) total mileage displaytypically the ‘A’ displayis on.
- If the car is on, turn it off.
- Release the ODO button once it starts to show zeros, then flip the key back to the “off” position.
- Turn the key in the ignition while maintaining pressure on the ODO button. till the dash lights turn on. Avoid starting the car.
What ‘MAINT REQD’ Means
Within 5000 miles of the last reset, the “MAINT REQD” indicator illuminates. It is merely a mileage counter meant to serve as a reminder to the user that an oil change is required and in no way indicates any system failure. If a specialist has always performed maintenance on your Toyota, they reset it after each oil change. It should be noted that the recommended oil change interval is not always 5000 miles. To find out how frequently the oil in your Camry needs to be changed, consult the owner’s manual and your usual technician.
Need Help?
Our service team would be delighted to assist you. Our entire staff of experts is Toyota-certified and adept in resolving even the most challenging problems with your Toyota. Make an appointment right away!
Why does the maintenance required message on my 2020 Toyota Corolla?
On your dashboard, the Toyota maintenance light may read “MAINT REQD. It’s a light that is always on and alerts you when you require an oil change at a licensed auto shop. Your Toyota will run more smoothly and efficiently if you change the oil in your car.
Why, after an oil change, is my maintenance required light still on?
Every 4,500 miles, once the maintenance has been reset, the light turns on for around 3 seconds before flashing for approximately 15 seconds. The majority of the time, this merely indicates that your car may need an oil change. After the maintenance data has been reset, the light will turn on and stay on if more than 5,000 miles have been driven.
How to Reset Maintenance Data on Toyota Corolla
You can easily reset your maintenance data. After the necessary maintenance has been carried out in accordance with the maintenance schedule, proceed as follows:
1. Switch the “engine start/stop switch or trip meter-activated engine shutoff a reading appeared,
2. Turn the trip meter reset switch while pressing the “engine switch ON, engine START STOP switch, etc.
3. Hold the button down while continuing to push it until the trip meter reads 000000.
When you understand what each warning light on your Toyota indicates, maintaining it is easy. Never be afraid to call the service staff at Toyota Palo Alto if you ever wonder whether your car needs any type of maintenance. You can ask our helpful staff for assistance in determining what’s wrong with your car and whether you need to schedule a service appointment.
How can I turn my car’s service light back on?
First, turn on the engine. Step 2: The display will say “Service required” if a service is overdue. Locate and press the OK button at the top right of the steering wheel for longer than one second to clear this message. The service interval will be reset to its default value in Step 3.
What happens after I change the oil in my car?
Reset Oil Change Indicator
- Turn on the ignition.
- Both the stop and accelerator pedals should be fully depressed.
- Maintain firm pressure on the brake and accelerator pedals.
- A notice verifying the reset process is ongoing appears after three seconds.
In my Toyota Camry, how do I turn off the dashboard lights?
Greetings on your brand-new Toyota Camry! Driving in low light conditions can be distracted by bright dash lights. Fortunately, adjusting the brightness is simple.
Follow these easy steps to dim the dash lights on your Toyota Camry:
- Locate the dial for the light. This is typically located on the dashboard’s lower left side. However, the location may vary based on your model, so if you’re unsure, read your owners handbook.
- To make your dash lights brighter, turn the dial higher.
- To make your dash lights less bright, turn the dial lower.
You can drive comfortably in the evenings now that you have figured out how to adjust the brightness of your dash lights. However, look at the Jerry app to see how much you may save on auto insurance before you get back on the road.
Choose from affordable estimates from more than 50 reputable insurance providers, and Jerry will handle the rest by getting your new policy and assisting you in canceling your old one. Nothing lengthy. No contacting anyone. zero effort merely savings The typical user of Jerry saves $879 annually on auto insurance.
How frequently should a Toyota Camry have its synthetic oil changed?
One of the most involved and expensive services for your car is an oil change. For traditional oil, Toyota suggests changing your Toyota Camry’s oil and filter every 3,000 to 5,000 miles. Every 7,500 to 10,000 miles, synthetic oil needs to be changed.
How accurate is oil life percentage?
Your neighborhood shop, which had a vested interest in keeping your automobile coming back every 5,000 kilometers, used to provide the answer to the question of when you need to replace your oil. These days, an automobile’s oil life monitoring system is increasingly routinely used to provide an answer to this query. This warning often appears between 8,000 and 13,000 kilometers, saving drivers money and lowering the amount of oil that is disposed of. How dependable are these systems, though? Oil life monitors are pretty trustworthy, according to studies, but they are not nearly as “set it and forget it” as sellers would have you believe. Continue reading to find out how to maintain your oil life monitor correctly and avoid needing to pay for expensive repairs.
How often should your oil be changed?
This is a wonderful question, especially in light of the widespread false information regarding the recommended percentage for changing your oil. When the oil life indication on your car is between 40% and 15%, it’s time to change the oil.
The % of oil life indicator on your car basically tells you how long it will be until it no longer operates at peak efficiency.
Some auto repair shops advise changing your oil every three months to six months, or every 3,000 to 5,000 miles. Although this may be a decent general guideline, the frequency of the service will ultimately depend on the weather, the road, and the driver.
Jerry is a registered broker who provides end-to-end assistance. Jerry will give you comparative quotes from dozens of the best insurance providers in the market in less than a minute. We handle all the correspondence and phone conversations, and we can even assist you in terminating your previous policy. It has never been simpler to save money.