When it’s time for an oil change, the Toyota 4Runner will notify you with a ‘Maintenance Required’ warning on the instrument panel. Once the car has driven 4,500 miles since the last reset, this alert will appear.
Following service, follow these instructions to reset the maintenance light.
- The car’s ignition should be turned to “On.” Press the Engine Start button twice on push-button vehicles. Never start the car.
- To switch the display to show the mileage for Trip A, press the “Odometer/Trip stem button” on the instrument panel.
- “Off” the ignition, please.
- the “Odometer/Trip stem button” firmly depress and hold.
- Hold the “Odometer/Trip button down while turning the key in the ignition. Press the Engine Start button twice on push-button vehicles without holding the brake. Never start the car.
- The maintenance light has been reset once the odometer reads zero mileage.
This guide is applicable to all 20102021 Toyota 4Runner model years.
In This Article...
How can you turn a Toyota 2019’s maintenance light back on?
Press the odometer button on your dashboard quickly, hold it there while turning the key to the second position. Hold the odometer button down for a further 10 seconds. You can hear a beeping noise in addition to the maintenance light beginning to flash. The light ought should thereafter go out.
How can I turn off the Toyota maintenance is required light?
Turn the key to position two while pressing and holding the odometer button on the dashboard. When the maintenance light begins to flash, keep holding the odometer button. There may even be beeping sounds. The light ought to dim.
Why does my maintenance light come on after I change the oil?
- If the car is on, turn it off.
- The ODO display will briefly flash before beginning to display only zeros.
- Release the ODO button once it starts to show zeros, then flip the key back to the “off” position.
- Turn the key in the ignition while maintaining pressure on the ODO button. till the dash lights turn on. Avoid starting the car.
- Verify that the odometer’s (ODO) total mileage displaytypically the ‘A’ displayis on.
- Press and hold the ODO reset / readout button while the engine is off.
- Now the light will read “MAINT REQD.”
What ‘MAINT REQD’ Means
Within 5000 miles of the last reset, the “MAINT REQD” indicator illuminates. It is merely a mileage counter meant to serve as a reminder to the user that an oil change is required and in no way indicates any system failure. If a specialist has always performed maintenance on your Toyota, they reset it after each oil change. It should be noted that the recommended oil change interval is not always 5000 miles. To find out how frequently the oil in your Camry needs to be changed, consult the owner’s manual and your usual technician.
Need Help?
Our service team would be delighted to assist you. Our entire staff of experts is Toyota-certified and adept in resolving even the most challenging problems with your Toyota. Make an appointment right away!
How frequently should a 2019 4Runner have its oil changed?
One of the most essential and crucial procedures for your car is an oil change. Every 3,000 to 5,000 miles is the recommended frequency for changing the oil and filter in your 2019 Toyota 4Runner, but it’s best to check your owner’s handbook and with your dealer to determine the intervals that work best for your vehicle.
What does a 2019 Toyota Highlander maintenance required mean?
On your dashboard, the Toyota maintenance light may read “MAINT REQD. It’s a light that is always on and alerts you when you require an oil change at a licensed auto shop. Your Toyota will run more smoothly and efficiently if you change the oil in your car.
How can I turn my car’s service light back on?
First, turn on the engine. Step 2: The display will say “Service required” if a service is overdue. Locate and press the OK button at the top right of the steering wheel for longer than one second to clear this message. The service interval will be reset to its default value in Step 3.
My maintenance is necessary light is on, why?
The mileage is the only factor that activates the maintenance required light, also known as the service required light. When this light turns on, different automakers have varying standards. For instance, the maintenance needed light on a car might turn on once every 10,000 lights and stay lit until it is manually turned off.
The oil change, spark plug replacement, new tire, etc. are just a few examples of the routine maintenance that should be performed on a vehicle.
When servicing your vehicle, mechanics typically reset the maintenance required light. The process for resetting the maintenance required light differs based on the make and type of the car, yet, if they don’t, you can do it yourself.