Use this straightforward technique to turn off the maintenance light on a Toyota 4runner for model years 2003, 2004, 2005, 2006, 2007, 2008, and 2009.
In This Article...
STEP 4
- Turn the ignition to the “RUN position” while pressing and holding down the reset knob. Holding down the Reset knob will cause the light to flash for two seconds, turn on for three seconds, and then turn off.
How can I clear the maintenance message on my Toyota?
A Toyota Maintenance Light Reset
- In order to start the car, turn the ignition to position one after inserting your key.
- Turn your key to position two after pressing and holding the trip meter reset button on the dashboard.
- Hold the odometer button down for a further ten seconds.
How frequently should I have my Toyota 4Runner’s oil changed?
Generally speaking, synthetic oil needs to be changed every 7,500 to 10,000 miles. For traditional oil, Toyota advises changing your Toyota 4Runner’s oil and filter every 3,000 to 5,000 miles. One of the most important and necessary procedures for your car is an oil change.
Why, after an oil change, is my maintenance required light still on?
Every 4,500 miles, once the maintenance has been reset, the light turns on for around 3 seconds before flashing for approximately 15 seconds. The majority of the time, this merely indicates that your car may need an oil change. After the maintenance data has been reset, the light will turn on and stay on if more than 5,000 miles have been driven.
How to Reset Maintenance Data on Toyota Corolla
You can easily reset your maintenance data. After the necessary maintenance has been carried out in accordance with the maintenance schedule, proceed as follows:
1. Switch the “engine start/stop switch or trip meter-activated engine shutoff a reading appeared,
2. Turn the trip meter reset switch while pressing the “engine switch ON, engine START STOP switch, etc.
3. Hold the button down while continuing to push it until the trip meter reads 000000.
When you understand what each warning light on your Toyota indicates, maintaining it is easy. Never be afraid to call the service staff at Toyota Palo Alto if you ever wonder whether your car needs any type of maintenance. You can ask our helpful staff for assistance in determining what’s wrong with your car and whether you need to schedule a service appointment.
Why does my Toyota state it needs maintenance?
- Now the light will read “MAINT REQD.”
- Verify that the odometer’s (ODO) total mileage displaytypically the ‘A’ displayis on.
- Release the ODO button once it starts to show zeros, then flip the key back to the “off” position.
- Turn the key in the ignition while maintaining pressure on the ODO button. till the dash lights turn on. Avoid starting the car.
- If the car is on, turn it off.
- The ODO display will briefly flash before beginning to display only zeros.
- Press and hold the ODO reset / readout button while the engine is off.
What ‘MAINT REQD’ Means
Within 5000 miles of the last reset, the “MAINT REQD” indicator illuminates. It is merely a mileage counter meant to serve as a reminder to the user that an oil change is required and in no way indicates any system failure. If a specialist has always performed maintenance on your Toyota, they reset it after each oil change. It should be noted that the recommended oil change interval is not always 5000 miles. To find out how frequently the oil in your Camry needs to be changed, consult the owner’s manual and your usual technician.
Need Help?
Our service team would be delighted to assist you. Our entire staff of experts is Toyota-certified and adept in resolving even the most challenging problems with your Toyota. Make an appointment right away!
How do you turn a 2016 Toyota 4Runner’s maintenance light back on?
Usually, even after servicing, a vehicle’s maintenance light needs to be manually reset. So don’t be alarmed; this is very natural.
Follow these fast and simple procedures to reset the maintenance light on your 2016 Toyota 4Runner:
- Alternately, turn the ignition to auxiliary mode or ON. Never start the car.
- To see ODO, press the trip display.
- Switch the ignition to “OFF.”
- While turning your car back on, keep holding down the trip reset button.
Now that the maintenance indicator should be off, you can drive a little more comfortably knowing that your vehicle is up to date.
With Jerry, there is still another method to drive safely. The Jerry app instantly compiles rates from more than 50 leading insurance providers, including Nationwide and Allstate! Once you’ve decided, they even assist you in canceling your old coverage.
My maintenance is necessary light is on, why?
The mileage is the only factor that activates the maintenance required light, also known as the service required light. When this light turns on, different automakers have varying standards. For instance, the maintenance needed light on a car might turn on once every 10,000 lights and stay lit until it is manually turned off.
The oil change, spark plug replacement, new tire, etc. are just a few examples of the routine maintenance that should be performed on a vehicle.
When servicing your vehicle, mechanics typically reset the maintenance required light. The process for resetting the maintenance required light differs based on the make and type of the car, yet, if they don’t, you can do it yourself.
How do you press the button on a Toyota RAV4 to turn off the maintenance is necessary light?
How to Extinguish the Toyota RAV4’s Maintenance Light
- Put the ignition on with your key. Turn the key to the first position.
- On the dashboard, press the reset trip meter button. Hold it down for a couple of seconds.
- Hold the odometer button down for another five or so seconds.
- Release the odometer button after it is off.
How can the oil life be checked on a 2017 Toyota Tacoma?
Oil Level Check 20162021 Toyota Tacoma SR Extended Cab Pickup 2.7L 4 Cyl.
- Remove Dipstick – Find the oil dipstick, take it out, and clean it.
- Reinstall the dipstick, take it out, and then check the oil level.
- More Information – More details regarding the oil level.