How To Reset Maintenance Light On 2016 Toyota Sienna

On the third generation of the Sienna, there are two ways to reset the maintenance reminder. Please adhere to the guidelines listed below based on the trim level of your car.

With Trip Button

Okay, in this part I’ll demonstrate how to use the trip button to reset the maintenance lights on the dash of a 2017 Toyota Sienna. Therefore, the first thing you should do is:

  • without starting, turn the ignition to the ON position.
  • Once the zeros have finished flashing, the maintenance data for resetting will appear on your screen, and you will have completed the task.
  • Hold the TRIP button down while the engine is off, then push the ignition start button twice while lifting your foot off the brake.
  • then extinguish the ignition
  • Hold the This Trip button down.
  • Ensure that you are using the TRIP A odometer.

With Steering Button

We have the 2018 Toyota Sienna right now. I’ll demonstrate to you how to turn off the maintenance-needed light. Basically, you’ll be using the steering-wheel navigation button. So just stick with me.

  • start the vehicle
  • Access the Gear menu tab.

If you are anyplace else on the screen, simply scroll until you reach the sprocket there. We want to go to the sprocket on top of the menu, therefore we’re going to press to the right.

Locate and choose SETTINGS.

In order to find SETTINGS, simply go up or down until you reach the menu if you don’t see it.

  • the MAINTENANCE RESET option
  • Choose “YES”

The maintenance interval will then be reset after it asks you if you want to reset the reminder light.

On a Toyota Sienna, how do I reset the maintenance light?

In many vehicles, persistent maintenance lights are a regular problem. Typically, there is no electrical issue; instead, your mechanic just neglected to reset the alert after your service was finished.

Just adhere to these simple steps to reset the maintenance required light on your Toyota Sienna:

  • Put your ignition key in accessory mode. You shouldn’t start your engine.
  • Find the ODO/TRIP button and press it until ODO appears on the display.
  • OFFSET your Sienna.
  • As you continue to hold down the ODO/TRIP button, turn on your car.
  • You have reset the maintenance light when the odometer display shows just zeros.
  • Once more, turn off your car.

Your car is not in need of maintenance, so you can drive with a little more confidence now that the maintenance light is off. Check out the Jerry app to see how much you could be saving on auto insurance before you get back on the road.

After you download Jerry, all you need to do is respond to a few questions that will take you around 45 seconds to do, and you’ll get car insurance rates for coverage that is identical to your current plan right away. Customers of Jerry save $879 year on average.

On a 2015 Toyota Sienna, how do you turn the maintenance light back on?

If mechanics neglect to reset the maintenance alert after servicing the car, it may become an annoyance. Fortunately, a 2015 Toyota Sienna’s maintenance light is simple to reset.

Simply adhere to these guidelines to restart the light:

  • Shut down the van.
  • A key is turned to the on position. Alternatively, if your vehicle has a push-button start, you can depress the button twice while keeping your foot off the brake.
  • In addition to pressing and holding the trip odometer button, restart the engine of the car.
  • The maintenance is necessary light needs to be reset.
  • To get the Trip A reading, press the trip odometer button on the instrument cluster.

You obviously care about your automobile if you take such good care of your Sienna. Therefore, make sure your car is fully insured without paying too much. It is quick and simple with the Jerry app.

Jerry is a certified insurance broker who obtains rates from numerous reputable and highly rated auto insurance providers. Jerry can assist you in purchasing insurance and terminating your current policy after you discover a fantastic quote for your 2015 Toyota Sienna. Customers often save close to $900 annually!

How can I dim the maintenance is necessary light?

How do I turn the “Maint Reqd” light back on?

  • Switch the ignition to the ON position.
  • Set the trip display to TRIP A mode on the odometer.
  • Activate the OFF position on the ignition switch.
  • Turn the ignition switch to the ON position while pressing and holding the Trip Meter RESET button.
  • It will do so via the service maintenance reminder light.

How can the maintenance needed light be turned off on a 2016 Toyota Camry?

Turn the key to position two while pressing and holding the odometer button on the dashboard. When the maintenance light begins to flash, keep holding the odometer button. There may even be beeping sounds. The light ought to dim.

Automatic Transmission Oil Capacity

Depending on the automatic gearbox, the 2016 Toyota Sienna can hold 6.9 or 7.1 quarts (6.53 or 6.72 liters) of automatic transmission oil.

What does Toyota Sienna’s “maint reqd” mean?

Toyota Maintenance Required Light: This light illuminates to notify you that your oil needs to be changed. 5,000 miles after the last reset, it turns on.

This light only turns on as a result of those miles; it has no means of knowing if your oil has been changed or not since then, and it never, ever indicates a problem.

When changing the oil, shops occasionally forget to reset the maintenance-required meter if the light isn’t yet on. Simply said, many quick-lube businesses are unable to reset it.

Resetting the maintenance needed light is simple. On most Toyotas, you can just:

  • A key is turned to the on position.
  • Turn the key back to the “on position, but not all the way to the “start position, while keeping the reset button down. There should be a string of dashes on the odometer display that gradually vanish. A string of zeros will appear after they have all vanished. Hold the reset button down while waiting for the trip meter’s (or the odometer’s) zeros to disappear “A) Reading comes back.
  • Next, check to see if the odometer reading is visible. (On some models, the trip-meter is included.) “A that you desire to be visible.)
  • Now press and hold the trip meter reset button. (Same button as for switching between the trip meters and the odometer.)
  • Back off the key after that.

The car should now be counting down to the next 5,000 interval, at which point the maintenance-required signal will turn back on.

How often should the oil be changed in a Toyota Sienna?

For traditional oil, Toyota suggests changing your Toyota Sienna’s oil and filter every 3,000 to 5,000 miles. Generally speaking, synthetic oil needs to be changed every 7,500 to 10,000 miles.

How can my Toyota maintenance be reset?

In order to start the car, turn the ignition to position one after inserting your key. Turn your key to position two after pressing and holding the trip meter reset button on the dashboard. Hold the odometer button down for a further ten seconds. The light should then begin to flash and potentially beep before turning off.

Why does my maintenance light come on after I change the oil?

  • Release the ODO button once it starts to show zeros, then flip the key back to the “off” position.
  • Verify that the odometer’s (ODO) total mileage displaytypically the ‘A’ displayis on.
  • Press and hold the ODO reset / readout button while the engine is off.
  • Now the light will read “MAINT REQD.”
  • Turn the key in the ignition while maintaining pressure on the ODO button. till the dash lights turn on. Avoid starting the car.
  • The ODO display will briefly flash before beginning to display only zeros.
  • If the car is on, turn it off.

What ‘MAINT REQD’ Means

Within 5000 miles of the last reset, the “MAINT REQD” indicator illuminates. It is merely a mileage counter meant to serve as a reminder to the user that an oil change is required and in no way indicates any system failure. If a specialist has always performed maintenance on your Toyota, they reset it after each oil change. It should be noted that the recommended oil change interval is not always 5000 miles. To find out how frequently the oil in your Camry needs to be changed, consult the owner’s manual and your usual technician.

Need Help?

Our service team would be delighted to assist you. Our entire staff of experts is Toyota-certified and adept in resolving even the most challenging problems with your Toyota. Make an appointment right away!

What does it imply if your Toyota has a maintenance required light on?

On your dashboard, the Toyota maintenance light may read “MAINT REQD. It’s a light that is always on and alerts you when you require an oil change at a licensed auto shop. Your Toyota will run more smoothly and efficiently if you change the oil in your car.