Three minutes are required.
This section will demonstrate how to reset the maintenance light on the 2013 Avalon that comes on after the engine oil and filter have been changed. Consequently, you basically need to:
In This Article...
without turning the key to start the engine
Press the engine start/stop button twice without hitting the brake pedal if your car has one.
Ensure that TRIP A is selected in the trip computer.
To access TRIP A, continually press the ODO/TRIP button on the instrument cluster.
- then extinguish the ignition
- Turn the ignition key back to the ON position while pressing and holding the ODO/TRIP button.
Hold down the trip button while pressing the start button twice if your car has an ignition button.
Keep it pressed down.
For information, the third and fourth versions of the Toyota Avalon are serviced by this business (2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018 model years). If you’re looking for the latest recent model, it’s right here.
How can I turn off the Toyota Avalon’s maintenance is required light?
How to Turn Off the Toyota Service Light
- As soon as you are ready to start your car, insert your key into the ignition and turn it to the first position.
- Turn your key to the second position after pressing and holding the trip meter reset button on the dashboard.
- Hold the odometer button down for a total of 10 seconds.
How can I turn off the maintenance is necessary light?
How do I turn the “Maint Reqd” light back on?
- Switch the ignition to the ON position.
- Set the trip display to TRIP A mode on the odometer.
- Activate the OFF position on the ignition switch.
- Turn the ignition switch to the ON position while pressing and holding the Trip Meter RESET button.
- It will do so via the service maintenance reminder light.
Why does my maintenance light come on after I change the oil?
- Verify that the odometer’s (ODO) total mileage displaytypically the ‘A’ displayis on.
- If the car is on, turn it off.
- Now the light will read “MAINT REQD.”
- Turn the key in the ignition while maintaining pressure on the ODO button. till the dash lights turn on. Avoid starting the car.
- Press and hold the ODO reset / readout button while the engine is off.
- The ODO display will briefly flash before beginning to display only zeros.
- Release the ODO button once it starts to show zeros, then flip the key back to the “off” position.
What ‘MAINT REQD’ Means
Verify that the odometer (ODO) is showing the total mileage (often the ‘A’ display).
If it’s on, turn the car off.
Now the ‘MAINT REQD’ light will be off.
Turn the key in the ignition while keeping the ODO button depressed. while dash lights are off. Refrain from starting the car.
When the car is not moving, hold down the ODO reset / readout button.
ODO display will flash a few times before beginning to display only zeros.
Release the ODO button once the display of zeros has started, and then flip the key back to the “off” position.
Need Help?
Our service team would be delighted to assist you. Our entire staff of experts is Toyota-certified and adept in resolving even the most challenging problems with your Toyota. Make an appointment right away!
What does the Toyota Avalon’s maintenance required light mean?
Toyota Maintenance Required Light: This light illuminates to notify you that your oil needs to be changed. 5,000 miles after the last reset, it turns on.
This light only turns on as a result of those miles; it has no means of knowing if your oil has been changed or not since then, and it never, ever indicates a problem.
When changing the oil, shops occasionally forget to reset the maintenance-required meter if the light isn’t yet on. Simply said, many quick-lube businesses are unable to reset it.
Resetting the maintenance needed light is simple. On most Toyotas, you can just:
- Turn the key back to the “on position, but not all the way to the “start position, while keeping the reset button down. There should be a string of dashes on the odometer display that gradually vanish. A string of zeros will appear after they have all vanished. Hold the reset button down while waiting for the trip meter’s (or the odometer’s) zeros to disappear “A) Reading comes back.
- Next, check to see if the odometer reading is visible. (On some models, the trip-meter is included.) “A that you desire to be visible.)
- Now press and hold the trip meter reset button. (Same button as for switching between the trip meters and the odometer.)
- A key is turned to the on position.
- Back off the key after that.
The car should now be counting down to the next 5,000 interval, at which point the maintenance-required signal will turn back on.
What does it imply if your Toyota has a maintenance required light on?
On your dashboard, the Toyota maintenance light may read “MAINT REQD. It’s a light that is always on and alerts you when you require an oil change at a licensed auto shop. Your Toyota will run more smoothly and efficiently if you change the oil in your car.
My maintenance is necessary light is on, why?
The mileage is the only factor that activates the maintenance required light, also known as the service required light. When this light turns on, different automakers have varying standards. For instance, the maintenance needed light on a car might turn on once every 10,000 lights and stay lit until it is manually turned off.
The oil change, spark plug replacement, new tire, etc. are just a few examples of the routine maintenance that should be performed on a vehicle.
When servicing your vehicle, mechanics typically reset the maintenance required light. The process for resetting the maintenance required light differs based on the make and type of the car, yet, if they don’t, you can do it yourself.
The amount of oil a 2014 Toyota Avalon uses
Filtered, 6.4 quarts Check the oil level after refueling. AMSOIL OE Synthetic Motor Oil is specifically designed for the longer oil change intervals currently advised by automakers.
How can I clear the maintenance message on my Toyota?
A Toyota Maintenance Light Reset
- In order to start the car, turn the ignition to position one after inserting your key.
- Turn your key to position two after pressing and holding the trip meter reset button on the dashboard.
- Hold the odometer button down for a further ten seconds.
What distinguishes a maintenance requirement from a check engine light?
Many people are unsure of what each of these lights means, and the check engine light and the service engine soon light are frequently confused for one another. We’ll describe how distinct they actually are despite the fact that they appear to be similar.
Authored by: Bradley Hayes, Director of Marketing at Autoscope European Car Repair and Automotive Blogger
Since Karl Benz originally unveiled his Benz Patent Motorwagen, automotive technology has advanced significantly. In fact, the notion that computers are essentially controlling our cars in today’s computer-driven society shouldn’t be shocking. In order to assure the precise right operation of your vehicle’s numerous systems and components, they regulate and track their performance. They even notify the driver when the automobile needs repair or maintenance. While technology hasn’t yet given our cars voices (like Kitt from Knight Rider), it has made it possible for them to communicate in other ways, such as through a series of backlit symbols that show up in your instrument cluster, such as a “check engine” and a “service engine” light.
How can the maintenance needed light on a Toyota Highlander be turned off?
Toyota Highlander Maintenance Light Reset Press the odometer button on your dashboard quickly, hold it there while turning the key to the second position. Hold the odometer button down for another 10 seconds or so. You can hear a beeping noise in addition to the maintenance light beginning to flash. The light ought should thereafter go out.