Your mechanic most likely failed to reset the maintenance light if it is still on after your car has had a thorough checkup. But don’t panic; by following a few easy actions, you can turn off the maintenance light on your 2014 Toyota 4Runner:
- Turn the ignition key once to start your automobile in auxiliary mode.
- Press and hold the Trip Meter Reset button while you turn off your car. Don’t let it go.
- Holding the button still, restart accessory mode on your vehicle.
- After a time, you ought to notice the odometer readings returning to normal. You can then let off of the Trip button after this has occurred.
You can drive more at ease now that you’ve successfully reset your maintenance light. To see how much you can save on your auto insurance before you head back out, download the Jerry app.
In This Article...
How can you turn a Toyota’s maintenance needed light back on?
In order to start the car, turn the ignition to position one after inserting your key. Turn your key to position two after pressing and holding the trip meter reset button on the dashboard. Hold the odometer button down for a further ten seconds. The light should then begin to flash and potentially beep before turning off.
Why, after an oil change, is my maintenance required light still on?
Every 4,500 miles, once the maintenance has been reset, the light turns on for around 3 seconds before flashing for approximately 15 seconds. The majority of the time, this merely indicates that your car may need an oil change. After the maintenance data has been reset, the light will turn on and stay on if more than 5,000 miles have been driven.
How to Reset Maintenance Data on Toyota Corolla
You can easily reset your maintenance data. After the necessary maintenance has been carried out in accordance with the maintenance schedule, proceed as follows:
1. Switch the “engine start/stop switch or trip meter-activated engine shutoff a reading appeared,
2. Turn the trip meter reset switch while pressing the “engine switch ON, engine START STOP switch, etc.
3. Hold the button down while continuing to push it until the trip meter reads 000000.
When you understand what each warning light on your Toyota indicates, maintaining it is easy. Never be afraid to call the service staff at Toyota Palo Alto if you ever wonder whether your car needs any type of maintenance. You can ask our helpful staff for assistance in determining what’s wrong with your car and whether you need to schedule a service appointment.
Why does my Toyota state it needs maintenance?
- Press and hold the ODO reset / readout button while the engine is off.
- If the car is on, turn it off.
- The ODO display will briefly flash before beginning to display only zeros.
- Release the ODO button once it starts to show zeros, then flip the key back to the “off” position.
- Verify that the odometer’s (ODO) total mileage displaytypically the ‘A’ displayis on.
- Turn the key in the ignition while maintaining pressure on the ODO button. till the dash lights turn on. Avoid starting the car.
- Now the light will read “MAINT REQD.”
What ‘MAINT REQD’ Means
Within 5000 miles of the last reset, the “MAINT REQD” indicator illuminates. It is merely a mileage counter meant to serve as a reminder to the user that an oil change is required and in no way indicates any system failure. If a specialist has always performed maintenance on your Toyota, they reset it after each oil change. It should be noted that the recommended oil change interval is not always 5000 miles. To find out how frequently the oil in your Camry needs to be changed, consult the owner’s manual and your usual technician.
Need Help?
Our service team would be delighted to assist you. Our entire staff of experts is Toyota-certified and adept in resolving even the most challenging problems with your Toyota. Make an appointment right away!
On a 2013 Toyota Tundra, how do you turn the maintenance light back on?
- Without starting the engine, turn the ignition to the “On position. If your car has a push-button ignition, press “Start” without depressing the brake pedal.
- By pushing the display change button or “Trip button,” you can change the display to “Trip A.”
- Completely shut off the car.
- Keep holding down the “Trip button.”
- Hold the “Trip button down while turning the ignition to “On without starting the car.
- Release the “Trip button” whenever the trip meter reads “all zeros.”
How can you turn off the Toyota RAV4’s maintenance is required light?
How to Extinguish the Toyota RAV4’s Maintenance Light
- Put the ignition on with your key. Turn the key to the first position.
- On the dashboard, press the reset trip meter button. Hold it down for a couple of seconds.
- Hold the odometer button down for another five or so seconds.
- Release the odometer button after it is off.
A 4th generation 4runner uses what kind of oil?
Actually, this engine has a reputation for using very little oil. It’s preferable to keep with the 5w30 viscosity that Toyota suggests. Although it is not necessary, many V8 4runner owners choose to use synthetic oil.
My 4runner makes a lot of short trips but not a lot of long distance travel (driving is spread out over 3 vehicles). Because of this, maintaining a shorter oil change interval is more significant to me. Having frequently fresh, clean oil is more important to me than worrying about clever additions that will make it last longer.
Running synthetic oil has no disadvantages besides the additional cost, so feel free to swap if you think it’s worthwhile. Many 4runner owners run Mobil 1 5w30 with no problems.
With this engine, burning or leaking oil are not typical problems. Additionally, these Toyotas are made to be durable. Many forum users who sent their oil out for examination were shocked to see how fresh it was even after the full service interval.
There’s no need to choose your oil too carefully; just use whichever brand of ordinary 5w30 is currently on sale. As long as you keep the 2UZ clean and don’t use any special oils, you shouldn’t encounter any issues.