automobiles without a smart key system
1. Switch on the engine (one position before starting engine).
2. Verify the trip meter Readings are displayed. Switch off the ignition.
3. Set the ignition to run while maintaining pressure on the trip meter reset knob (one position before starting engine).
4. Keep the knob depressed for at least 5 seconds. “000000” appears on the odometer, and the light turns off. The LED will keep blinking if the system can’t be reset.
5. To make sure the indication has been reset, turn off the ignition and then turn on the engine.
1. Slightly depress the “ENGINE START STOP” switch (do not start engine).
3. Press the “ENGINE START STOP” switch once while simultaneously pressing the Trip Meter reset button (do not start engine).
4. Hold down the button while continuing to press it until “000000” appears on the trip meter.
In This Article...
On a Toyota Rav4, how do you change the maintenance light?
In order to start the car, turn the ignition to position one with your key in the ignition. Turn the key to position two while pressing and holding the trip meter reset button on the dashboard. For 10 seconds, keep your finger on the odometer button. Then the light should flash, beep, and finally turn off.
Why does my Rav4 indicate that maintenance is needed?
The significance of the emblem MAINT REQD is significant. The MAINT REQD light indicates when the vehicle’s scheduled maintenance is due when it illuminates. If your car is under two years old, this service can be covered by your ToyotaCare plan.
How can I turn a Toyota’s maintenance light back on?
In order to start the car, turn the ignition to position one after inserting your key. Turn your key to position two after pressing and holding the trip meter reset button on the dashboard. Hold the odometer button down for a further ten seconds. The light should then begin to flash and potentially beep before turning off.
How should I respond if my maintenance light illuminates?
How Can the Maintenance Required Light Be Reset?
- Turn on your car. Look at your dashboard when your key is in the on position.
- Press the Trip Meter Reset Button after turning off the engine.
- Re-start the vehicle.
- Keep pressing the reset button.
- Reset button released
What does “immediate maintenance required” on my car mean?
The mileage is the only factor that activates the maintenance required light, also known as the service required light. When this light turns on, different automakers have varying standards. For instance, the maintenance needed light on a car might turn on once every 10,000 lights and stay lit until it is manually turned off.
The oil change, spark plug replacement, new tire, etc. are just a few examples of the routine maintenance that should be performed on a vehicle.
When servicing your vehicle, mechanics typically reset the maintenance required light. The process for resetting the maintenance required light differs based on the make and type of the car, yet, if they don’t, you can do it yourself.
Why, after an oil change, is my maintenance required light still on?
Every 4,500 miles, once the maintenance has been reset, the light turns on for around 3 seconds before flashing for approximately 15 seconds. The majority of the time, this merely indicates that your car may need an oil change. After the maintenance data has been reset, the light will turn on and stay on if more than 5,000 miles have been driven.
How to Reset Maintenance Data on Toyota Corolla
You can easily reset your maintenance data. After the necessary maintenance has been carried out in accordance with the maintenance schedule, proceed as follows:
1. Switch the “engine start/stop switch or trip meter-activated engine shutoff a reading appeared,
2. Turn the trip meter reset switch while pressing the “engine switch ON, engine START STOP switch, etc.
3. Hold the button down while continuing to push it until the trip meter reads 000000.
When you understand what each warning light on your Toyota indicates, maintaining it is easy. Never be afraid to call the service staff at Toyota Palo Alto if you ever wonder whether your car needs any type of maintenance. You can ask our helpful staff for assistance in determining what’s wrong with your car and whether you need to schedule a service appointment.
What happens after I change the oil in my car?
Reset Oil Change Indicator
- Turn on the ignition.
- Both the stop and accelerator pedals should be fully depressed.
- Maintain firm pressure on the brake and accelerator pedals.
- A notice verifying the reset process is ongoing appears after three seconds.
When the maintenance required light blinks, what does that mean?
If you’re unsure of what a warning light on your dashboard indicates, it can make you feel uneasy. Thankfully, you normally don’t need to worry about it.
A flashing maintenance light is typically your car’s method of telling you that it needs to be serviced soon. The light’s purpose is to alert drivers when it might be time for an oil change or a tune-up by turning on at predetermined intervals.
You have roughly 500 miles left before you need to have your automobile serviced when the light first starts flashing. Your maintenance light will inform you by turning on and staying on when it’s due for service.
Download Jerry, the super insurance expert app, to find the answers to all of your maintenance-related concerns.
Jerry is a powerful tool for finding vehicle insurance discounts, and it can do so in just 45 seconds! Jerry will evaluate prices from the leading insurance companies in the country to get you the cheapest offers, and if you decide to transfer, he can even cancel your current policy!
How can the VSC light on a 2009 Toyota Corolla be reset?
Vehicle Stability Control, or VSC as it is commonly known, is the stability control system used in Toyota automobiles. By lowering or eliminating the power provided to your wheels, stability control aids in the maintenance of traction and control in your vehicle. By automatically providing brake pressure to up to three wheels, it achieves this. The system’s main objective is to keep your car traveling in the direction of its wheels. Since 2012, at least in the USA, it has become a necessary safety requirement. Naturally, VSC OFF denotes that your Toyota’s stability control is turned off.
VSC Light Easy Fix
Depending on the model year of the Toyota, a button with the same icon as the light in your gauges will be located either next to your shifter or next to your steering wheel. When you’ve found it:
- Ensure that you have come to a complete stop. If you can, put the car in park.
- For a few seconds, hold down the VSC button.
- The indicator lights for TRAC OFF and VSC OFF will turn on. Now both systems are off.
- Once more, press the VSC button. As soon as both lights go out, the systems are back in operation.
If the VSC OFF light is still on, there can be a glitch in your car’s computer or a problem with the VSC system. Bring your car to a Toyota service location near you so a qualified technician can check the codes and identify the problem. Although it is safe to drive your Toyota even with the VSC OFF light on, we advise caution, especially in bad weather.
In Need of Repair?
Bring your car to the Toyota of Arlington servicing facility if you live close to Chicago and need repairs. We can install OEM parts for you because we have access to them. Get a free estimate from our outstanding collision facility if you need body work.
How soon after the maintenance necessary light do you have?
After 4,500 miles, a flashing maintenance required light turns on. This is a reminder that the 5,000-mile service interval is approaching and that you should schedule an appointment for car maintenance.