Toyota introduced the Camry Hybrid in 2007, joining the hybrid vehicle trend. A 2.4-liter, four-cylinder engine with 187 horsepower powered the 2009 Camry Hybrid. Toyota installed a mechanism in the 2009 Camry Hybrid to notify the driver when the car requires maintenance, like an oil change, by flashing a “Maint” light. This light needs to be manually reset when the 2009 Camry’s maintenance is completed. To reset this light, Toyota specifies a particular series of steps.
In This Article...
Step 3
Activate the “Off” position on the hybrid system. Without starting the Camry, turn the “Power” switch to the “On” position while continuing to press and hold the reset knob underneath the instrument cluster screen.
Step 4
Keep an eye out as the instrument cluster display reads “Oil Mode Reset.” Hold down the “Reset” button for at least five seconds, or until “Complete” appears on the instrument cluster panel.
How can you turn a Toyota Camry hybrid’s maintenance light back on?
Turn the key to position two while pressing and holding the odometer button on the dashboard. When the maintenance light begins to flash, keep holding the odometer button. There may even be beeping sounds. The light ought to dim.
How can the maintenance needed light on a 2009 Toyota Prius be reset?
This belongs in the category of “very old news, but I’m writing it for a purpose. Her maintenance request light was on, so I just received a call from a customer asking to book a 5K service. We recently completed a service roughly 2,000 miles ago, according to my review of her paperwork. Oops! It’s ridiculous, I know. She agreed to reset the light herself, so I promised to send her some instructions.
I had originally planned to copy and paste some instructions off the internet since, well, why recreate the wheel? Anyone who is familiar with tech support is probably also comfortable using Google and copying and pasting.
The trouble is, none of the directions I discovered truly appealed to me. There were numerous places where the reader could become perplexed and make mistakes. I therefore made the decision to draft my own directions. My instructions might end up being just as poorly written as the ones I found in the Google highlighted snippet. I occasionally experience editing blindness. I read what I was thinking when I proofread rather than what I had really written. You be the judge, I say.
Yet another version of: How to reset the maint req light on a 2004-2009 Prius
1. Switch on the power to “By *not* stepping on the brake pedal and twice pushing the power button, the ON position is selected.
2. Push the ODO/TRIP button underneath the dash display until the mileage is displayed (not Trip A or Trip B)
3. Switch on the device’s power “by *not* stepping on the brake pedal and pressing the power button once to the OFF position.
4. Push the ODO/TRIP button and hold it down. Hold on till Simon commands.
5. Switch on the appliance “By *not* stepping on the brake pedal and twice pushing the power button, the ON position is selected.
6. Hold the ODO/TRIP button down until the odometer displays “000000.
7. And that’s it. You can release the ODO/TRIP button, according to Simon. The next time you Ready the car, the maintenance necessary light must be off.
Why does my maintenance light come on after I change the oil?
- Press and hold the ODO reset / readout button while the engine is off.
- Now the light will read “MAINT REQD.”
- Turn the key in the ignition while maintaining pressure on the ODO button. till the dash lights turn on. Avoid starting the car.
- Release the ODO button once it starts to show zeros, then flip the key back to the “off” position.
- The ODO display will briefly flash before beginning to display only zeros.
- If the car is on, turn it off.
- Verify that the odometer’s (ODO) total mileage displaytypically the ‘A’ displayis on.
What ‘MAINT REQD’ Means
Within 5000 miles of the last reset, the “MAINT REQD” indicator illuminates. It is merely a mileage counter meant to serve as a reminder to the user that an oil change is required and in no way indicates any system failure. If a specialist has always performed maintenance on your Toyota, they reset it after each oil change. It should be noted that the recommended oil change interval is not always 5000 miles. To find out how frequently the oil in your Camry needs to be changed, consult the owner’s manual and your usual technician.
Need Help?
Our service team would be delighted to assist you. Our entire staff of experts is Toyota-certified and adept in resolving even the most challenging problems with your Toyota. Make an appointment right away!
How can the maintenance needed light on a 2008 Toyota Camry be reset?
Press the odometer button on your dashboard quickly, hold it there while turning the key to the second position. Hold the odometer button down for a further 10 seconds. You can hear a beeping noise in addition to the maintenance light beginning to flash. The light ought should thereafter go out.
My maintenance is necessary light is on, why?
The mileage is the only factor that activates the maintenance required light, also known as the service required light. When this light turns on, different automakers have varying standards. For instance, the maintenance needed light on a car might turn on once every 10,000 lights and stay lit until it is manually turned off.
The oil change, spark plug replacement, new tire, etc. are just a few examples of the routine maintenance that should be performed on a vehicle.
When servicing your vehicle, mechanics typically reset the maintenance required light. The process for resetting the maintenance required light differs based on the make and type of the car, yet, if they don’t, you can do it yourself.
What does a 2009 Toyota Corolla’s maintenance required light mean?
On your dashboard, the Toyota maintenance light may read “MAINT REQD. It’s a light that is always on and alerts you when you require an oil change at a licensed auto shop. Your Toyota will run more smoothly and efficiently if you change the oil in your car.
How can I clear the maintenance message on my Toyota?
A Toyota Maintenance Light Reset
- In order to start the car, turn the ignition to position one after inserting your key.
- Turn your key to position two after pressing and holding the trip meter reset button on the dashboard.
- Hold the odometer button down for a further ten seconds.
How can I turn my car’s service light back on?
First, turn on the engine. Step 2: The display will say “Service required” if a service is overdue. Locate and press the OK button at the top right of the steering wheel for longer than one second to clear this message. The service interval will be reset to its default value in Step 3.
Why does my Toyota’s maintenance indicator constantly flashing?
Toyota’s maintenance reminder system only serves to remind the motorist to have their car’s oil changed. The engine light will turn on after 5,000 miles of driving since the computer counts the engine’s mileage from the time it was reset. The system does not account for the changes between mild and extreme driving situations, load weight, towing, or weather conditions, all of which are significant factors that affect oil life because it is not algorithm driven, unlike other more sophisticated maintenance reminder systems.
Because of this, people who regularly tow or drive in adverse weather conditions and require more frequent oil changes may find the maintenance light ineffective. However, for individuals who frequently use the motorway in good weather, it might not be practical. This is not to suggest that a driver should completely ignore the maintenance light. Keep an eye on your driving circumstances throughout the year and, if necessary, have a professional assess your unique, most frequent driving conditions to determine whether or not your car need servicing.
The table below can help you estimate how frequently you would need to change the oil in a current car (earlier cars typically require more regular oil changes):
Even though my automobile says maintenance is necessary, can I still drive it?
Simply put, the flashing maintenance required light is alerting you that maintenance on your car is necessary. The indicator will come on when a predetermined period of time has passed since your car’s last service or based on how far you’ve driven it.
This light typically indicates that you should change the oil in your car. The maintenance data will be reset for you when your car has been taken in for service.
To manually reset the system to turn off the light, however, follow these instructions:
When the maintenance light comes on, you can continue to drive, but bear in mind that you are doing so at your own risk if the required or scheduled repair is skipped.
On a 2009 Toyota Camry, how do you turn off the check engine light?
After repairs, I discovered two ways to turn the light off, assuming all issues have been resolved.
Under the steering column, you may find the fuse panel cover. To remove it, use your fingers to pull down on it.
Find the electronic control unit fuse by looking at the diagram on the fuse panel lid.
The fuse for the electronic control unit can be pulled out using the fuse puller, which can be found inside the fuse panel.
Do not start the engine after inserting the key into the ignition. Put the fuse back in place after waiting a while. On the instrument panel, the check engine light should start to flicker a few times before turning off.
How can the VSC light be turned off on a 2007 Toyota Camry Hybrid?
Vehicle Stability Control, or VSC as it is commonly known, is the stability control system used in Toyota automobiles. By lowering or eliminating the power provided to your wheels, stability control aids in the maintenance of traction and control in your vehicle. By automatically providing brake pressure to up to three wheels, it achieves this. The system’s main objective is to keep your car traveling in the direction of its wheels. Since 2012, at least in the USA, it has become a necessary safety requirement. Naturally, VSC OFF denotes that your Toyota’s stability control is turned off.
VSC Light Easy Fix
Depending on the model year of the Toyota, a button with the same icon as the light in your gauges will be located either next to your shifter or next to your steering wheel. When you’ve found it:
- Ensure that you have come to a complete stop. If you can, put the car in park.
- For a few seconds, hold down the VSC button.
- The indicator lights for TRAC OFF and VSC OFF will turn on. Now both systems are off.
- Once more, press the VSC button. As soon as both lights go out, the systems are back in operation.
If the VSC OFF light is still on, there can be a glitch in your car’s computer or a problem with the VSC system. Bring your car to a Toyota service location near you so a qualified technician can check the codes and identify the problem. Although it is safe to drive your Toyota even with the VSC OFF light on, we advise caution, especially in bad weather.
In Need of Repair?
Bring your car to the Toyota of Arlington servicing facility if you live close to Chicago and need repairs. We can install OEM parts for you because we have access to them. Get a free estimate from our outstanding collision facility if you need body work.