Here is the method that, after attempting a few that I tried and found to be unsuccessful, did, in fact, work on our 2007 Solara SLE convertible:
1. Turn the key to the “On” position and push the “Trip A” button on the trip odometer.
2. Keep pressing the trip odometer button.
3. Switch the key “Off” and then “On”
4. After the miles reaches 0.0 and all five dashes have vanished, release the trip odometer button.
5. To make sure the maintenance light is off, turn the key to “Off” and back to “On.”
In This Article...
How can the maintenance light on a Toyota Solara be reset?
Keep your Toyota Solara in good condition by getting routine oil changes and staying on top of other basic maintenance. Most likely, the mechanic simply neglected to reset the light, but the problem is simple to resolve.
Observe these instructions to reset the maintenance light on a Toyota Solara:
- Turn the key to the on position and depress the trip button.
- To choose your odometer, press the trip button on the instrument cluster’s left side.
- Switch the ignition to the “on” position, but don’t push the starter.
- The maintenance is necessary light should flash and then go away.
- Shut off the vehicle.
Why not spend an extra minute using the Jerry app to save hundreds on your auto insurance while you’re turning off the maintenance light on your Toyota Solara?
Jerry assists you in finding and comparing rates from more than 50 leading suppliers in minutes as a licensed broker. Jerry can assist you with purchasing new coverage and even canceling your existing policy when you discover a lower cost for your Toyota Solara.
What does a 2007 Toyota Solara’s maintenance light mean?
Even the smallest details, like dashboard lights, give each car a unique look. Knowing what each light indicates and what to do when one comes on might be challenging. While some lights are merely warnings, others are critical and must not be disregarded. By addressing the query, “What does it signify when the maintenance light is blinking in my Corolla?,” we hope to assist you better understand your Toyota warning lights.
What does the maintenance required light mean?
Other automakers don’t offer a dashboard light like the maintenance required light, which is present on Toyota automobiles. Many new Toyota drivers could mistakenly believe that this light is the check engine light, but it actually represents a completely different warning. According to the distance travelled on the vehicle’s maintenance plan, the maintenance required light alerts you that repair is necessary.
The check engine light on my 2006 Toyota Solara needs to be reset.
Leave the key in the “on” position after turning it. Position while the cable is off for two minutes. two minutes later, turn the key off. Reconnect the negative cable next.
Why does the maintenance light not go out?
How do I turn the “Maint Reqd” light back on?
- Switch the ignition to the ON position.
- Set the trip display to TRIP A mode on the odometer.
- Activate the OFF position on the ignition switch.
- Turn the ignition switch to the ON position while pressing and holding the Trip Meter RESET button.
- It will do so via the service maintenance reminder light.
What does the Toyota’s dashboard’s orange exclamation point signify?
Look for the horseshoe-shaped light with an exclamation mark in the middle since a flat tire can ruin your day. This warning light means that your Toyota’s tires need to have air added, therefore you should go to a dealership or service center. If you don’t, your car may be more prone to getting a flat tire. Additionally, because the tires won’t spin as smoothly, it will decrease your fuel efficiency.
What does Toyota indicate by the orange triangle with the exclamation point?
Other dashboard indicators indicate a potential issue with one of the vehicle’s systems. You should probably have your Toyota Camry checked out right away if any of these warning lights on your dash illuminate:
- The vehicle is either low on brake fluid or the brake system is malfunctioning if you see BRAKE in all caps on the dashboard.
- ABS warning light*: This warning light is simply shown on the dashboard by the letters “ABS. When it does, either the brake assist system or the ABS (anti-lock braking system) are malfunctioning.
- The seat belt warning light resembles someone who is buckled in. When neither the driver nor the front-seat passenger is wearing a seat belt, this light illuminates. Once everyone has buckled their belts, the light should go out.
- The check engine light, also known as a malfunction indicator lamp, is a depiction of an engine with the word “CHECK” underneath it in all capital letters. If this light illuminates, there may be a problem with the electronic automatic transmission control system, the throttle control system, or the engine control system.
- This light appears as an exclamation point enclosed in an unbroken circle and indicates the tire pressure. Either one or more tires will show signs of low air pressure, or the tire pressure warning system won’t function properly. When it’s safe, fill your tires at a nearby gas station.
- Exclamation point enclosed in a triangle is the appearance of the master warning light. When the master warning system detects a problem with the Camry and displays a message on the multi-information display, a buzzer will sound and the light will flash. Read the warning as soon as it is safe to do so if you notice this exclamation point in your Toyota Camry.
The lights with an asterisk (*) next to them indicate that your Camry is no longer safe to drive and needs to be brought right away to our Toyota dealership. But if any of these lights arise and don’t go out as they should, our experts can resolve the problem.
Why does my car indicate maintenance is needed following an oil change?
- Press and hold the ODO reset / readout button while the engine is off.
- If the car is on, turn it off.
- Verify that the odometer’s (ODO) total mileage displaytypically the ‘A’ displayis on.
- Now the light will read “MAINT REQD.”
- The ODO display will briefly flash before beginning to display only zeros.
- Release the ODO button once it starts to show zeros, then flip the key back to the “off” position.
- Turn the key in the ignition while maintaining pressure on the ODO button. till the dash lights turn on. Avoid starting the car.
What ‘MAINT REQD’ Means
Within 5000 miles of the last reset, the “MAINT REQD” indicator illuminates. It is merely a mileage counter meant to serve as a reminder to the user that an oil change is required and in no way indicates any system failure. If a specialist has always performed maintenance on your Toyota, they reset it after each oil change. It should be noted that the recommended oil change interval is not always 5000 miles. To find out how frequently the oil in your Camry needs to be changed, consult the owner’s manual and your usual technician.
Need Help?
Our service team would be delighted to assist you. Our entire staff of experts is Toyota-certified and adept in resolving even the most challenging problems with your Toyota. Make an appointment right away!
How can I turn off the Toyota Camry’s maintenance is required light?
Push and hold the odometer button on your dashboard briefly, then quickly turn your key to the second position. Hold the odometer button down for a further 10 seconds. The maintenance light should flash and you could hear a beeping if everything is done correctly. Your Toyota Camry’s maintenance light ought to go out after doing that.
How can you turn a Toyota’s dash light back on?
Turn your key to position two after pressing and holding the trip meter reset button on the dashboard. Hold the odometer button down for a further ten seconds. The light should then begin to flash and potentially beep before turning off. Start the vehicle after releasing the odometer button.
Without a scanner, how can I reset my check engine light?
Using a Scanner to Reset a Check Engine Light. Without a scanner, unplug the negative battery cable from the engine and wait a few seconds to restart the check engine light. Your car’s diagnostic system will be reset as a result, and if the underlying problem has been fixed, the light should go off right away.
Driving a car with the check engine light on is it safe?
Your emissions system is having an issue if your check engine light is on. In any case, as long as the automobile isn’t acting abnormally, you’re fine to drive for the time being. Just having the issue fixed and the check engine light inspected.
How can I turn my car’s service light back on?
First, turn on the engine. Step 2: The display will say “Service required” if a service is overdue. Locate and press the OK button at the top right of the steering wheel for longer than one second to clear this message. The service interval will be reset to its default value in Step 3.