After the last reset, the maintenance light is set to turn on around 7500 miles later. At roughly 5000 miles after the last reset, it will actually begin to remain on longer.
If you perform your own oil changes or if the dealer forgets to reset it, follow these easy procedures.
These recommendations are found in TSB EL002-03:
1. Switch the ignition to the “ON” position. 2. Change the trip/odometer display to “ODO” mode. 3. Switch the ignition to the “OFF” position. 4. Turn the ignition switch to the “ON” position while pressing and holding the Trip Meter “RESET” button. 5. The warning light for servicing and maintenance will:
i. Light up continuously for three seconds ii. Blink for two seconds iii. Light up continuously for one second iv. Cut off
6. Unpress the “RESET” button on the trip meter. 7. Position the ignition switch to “OFF” 8. After switching the ignition to the “ON” position, make sure the service maintenance reminder light has stopped blinking.
In This Article...
How do you turn off the Toyota Tacoma’s maintenance is required light?
The convenience of having a car-savvy family member must be incredible! Yes, you can manually reset your light as you are aware that your car is in good condition.
Turn off your vehicle, then push and hold the odometer reset button to turn off the maintenance light on a Toyota Tacoma. Odo/Trip is the typical label for this button. Hold the button down as you restart the ignition of your car.
Your maintenance light ought to be back on now! By starting your car as usual and waiting a few seconds, you can ensure that the light remains off. Visit a professional to ensure that your automobile and your sensors are in good working order if the light does indeed come back on.
Although automobile repairs might be expensive, Jerry can help you save money on other auto-related costs. Jerry is a free insurance comparison software that checks around for the best deals with more than 50 different insurance providers. You may make adjustments at any time, receive prices instantly, and text an agent with any queries you may have. Every year, the typical Jerry user saves $879.
How can I turn off the Toyota maintenance is required light?
Turn the key to position two while pressing and holding the odometer button on the dashboard. When the maintenance light begins to flash, keep holding the odometer button. There may even be beeping sounds. The light ought to dim.
How frequently should I have my Toyota 4Runner’s oil changed?
Generally speaking, synthetic oil needs to be changed every 7,500 to 10,000 miles. For traditional oil, Toyota advises changing your Toyota 4Runner’s oil and filter every 3,000 to 5,000 miles. One of the most important and necessary procedures for your car is an oil change.
Why does my maintenance light come on after I change the oil?
- If the car is on, turn it off.
- Verify that the odometer’s (ODO) total mileage displaytypically the ‘A’ displayis on.
- Turn the key in the ignition while maintaining pressure on the ODO button. till the dash lights turn on. Avoid starting the car.
- Press and hold the ODO reset / readout button while the engine is off.
- The ODO display will briefly flash before beginning to display only zeros.
- Now the light will read “MAINT REQD.”
- Release the ODO button once it starts to show zeros, then flip the key back to the “off” position.
What ‘MAINT REQD’ Means
Within 5000 miles of the last reset, the “MAINT REQD” indicator illuminates. It is merely a mileage counter meant to serve as a reminder to the user that an oil change is required and in no way indicates any system failure. If a specialist has always performed maintenance on your Toyota, they reset it after each oil change. It should be noted that the recommended oil change interval is not always 5000 miles. To find out how frequently the oil in your Camry needs to be changed, consult the owner’s manual and your usual technician.
Need Help?
Our service team would be delighted to assist you. Our entire staff of experts is Toyota-certified and adept in resolving even the most challenging problems with your Toyota. Make an appointment right away!
How is the mileage reset after an oil change?
Get behind the wheel of a pre-2005 GM vehicle, shut the door, turn the ignition to the auxiliary power position, wait for the lights to come on, then quickly depress the accelerator three times within five seconds after turning the key. When the counter has been reset, the oil light should flash.
Use this process on a GM model from 2006 or later, however keep in mind that some cars have slightly different button locations to hit to reset.
Turn the key to the auxiliary power position while sitting behind the wheel and with all the doors closed. After finding the oil life message by scrolling through the options on the Driver Information Center (DIC), press and hold the enter key for one second before letting go. There will be a reset notice on the DIC.
The amount of oil a V8 4runner consumes
According to the owner’s manual, the 4.7 V8 needs 6.2 liters (or 6.5 quarts) of oil. Personally, I always use 6 liters and consider it adequate. Overfilling it is preferable to having it register slightly lower on the dipstick. Buy that extra liter if it makes you feel better to add the exact amount that Toyota advises.
For each generation of 4runner, the oil type and interval are listed in a table in this post if you possess a different model.
When I turn on my automobile, why does the maintenance required light flash?
If you’re unsure of what a warning light on your dashboard indicates, it can make you feel uneasy. Thankfully, you normally don’t need to worry about it.
A flashing maintenance light is typically your car’s method of telling you that it needs to be serviced soon. The light’s purpose is to alert drivers when it might be time for an oil change or a tune-up by turning on at predetermined intervals.
You have roughly 500 miles left before you need to have your automobile serviced when the light first starts flashing. Your maintenance light will inform you by turning on and staying on when it’s due for service.
Download Jerry, the super insurance expert app, to find the answers to all of your maintenance-related concerns.
Jerry is a powerful tool for finding vehicle insurance discounts, and it can do so in just 45 seconds! Jerry will evaluate prices from the leading insurance companies in the country to get you the cheapest offers, and if you decide to transfer, he can even cancel your current policy!
Does the need for maintenance equate to a check engine light?
Some motorists could mistake the check engine light for the service or maintenance necessary light on the instrument cluster. These alert lights are not connected. The service required light simply indicates that the vehicle needs an oil change or other standard maintenance.
How can the check engine light on a 2008 Toyota Tacoma be turned off?
response given by
- Step 1 is to raise the hood.
- Disconnect the negative battery terminal in step two.
- Step 3: To clear the computer’s memory, depress the brake pedal for roughly a minute.
- Step 4: Start your car after reconnecting the negative battery terminal.
- HOWEVER: What does the check engine light actually mean?
What does the Toyota Tacoma’s maintenance required light mean?
It’s possible that your Toyota Tacoma needs a different service, but it’s more likely that the oil professionals just forgot to turn off or reset the maintenance necessary light. You can reset it yourself by following these steps:
- Release the reset button after restarting your car. The light ought to be gone when you start your car again.
- Press the reset button once again, then restart the engine of your car.
- To reset the odometer, press and hold the button. You may find it on your dashboard.
- Start with the engine off.
However, it’s a good idea to visit your mechanic if the light doesn’t go out. The maintenance required light may be alerting you to something more than low oil because it can also signal other issues with your car.
It’s also a good idea to make sure that your insurance policy has adequate coverage because you can end up with a bigger issue than you anticipated. If you’re not satisfied with what you discover, try the Jerry app. Download the app to obtain a full collection of quotes selected just for you after quickly answering a few questions. The typical user saves $879 yearly.
My maintenance is necessary light is on, why?
The mileage is the only factor that activates the maintenance required light, also known as the service required light. When this light turns on, different automakers have varying standards. For instance, the maintenance needed light on a car might turn on once every 10,000 lights and stay lit until it is manually turned off.
The oil change, spark plug replacement, new tire, etc. are just a few examples of the routine maintenance that should be performed on a vehicle.
When servicing your vehicle, mechanics typically reset the maintenance required light. The process for resetting the maintenance required light differs based on the make and type of the car, yet, if they don’t, you can do it yourself.