2. Verify the displayed odometer reading. Turn off the ignition.
3. Set the ignition to run while maintaining pressure on the trip meter reset knob (one position before starting engine).
4. Keep the knob depressed for at least 5 seconds. “000000” appears on the odometer, and the light turns off. The LED will keep blinking if the system can’t be reset.
5. To make sure the indication has been reset, turn off the ignition and then turn on the engine.
In This Article...
How can the repair needed light on a Toyota Highlander be reset?
Toyota Highlander Maintenance Light Reset Press the odometer button on your dashboard quickly, hold it there while turning the key to the second position. Hold the odometer button down for another 10 seconds or so. You can hear a beeping noise in addition to the maintenance light beginning to flash. The light ought should thereafter go out.
What does the maintenance needed light on a Toyota Highlander from 2006 mean?
Toyota Maintenance Required Light: This light illuminates to notify you that your oil needs to be changed. 5,000 miles after the last reset, it turns on.
This light only turns on as a result of those miles; it has no means of knowing if your oil has been changed or not since then, and it never, ever indicates a problem.
When changing the oil, shops occasionally forget to reset the maintenance-required meter if the light isn’t yet on. Simply said, many quick-lube businesses are unable to reset it.
Resetting the maintenance needed light is simple. On most Toyotas, you can just:
- Back off the key after that.
- Next, check to see if the odometer reading is visible. (On some models, the trip-meter is included.) “A that you desire to be visible.)
- Now press and hold the trip meter reset button. (Same button as for switching between the trip meters and the odometer.)
- Turn the key back to the “on position, but not all the way to the “start position, while keeping the reset button down. There should be a string of dashes on the odometer display that gradually vanish. A string of zeros will appear after they have all vanished. Hold the reset button down while waiting for the trip meter’s (or the odometer’s) zeros to disappear “A) Reading comes back.
- A key is turned to the on position.
The car should now be counting down to the next 5,000 interval, at which point the maintenance-required signal will turn back on.
How can I turn off my Toyota’s maintenance light?
Turn the key to position two while pressing and holding the odometer button on the dashboard. When the maintenance light begins to flash, keep holding the odometer button. There may even be beeping sounds. The light ought to dim.
Why does my maintenance light come on after I change the oil?
- The ODO display will briefly flash before beginning to display only zeros.
- Release the ODO button once it starts to show zeros, then flip the key back to the “off” position.
- Press and hold the ODO reset / readout button while the engine is off.
- If the car is on, turn it off.
- Now the light will read “MAINT REQD.”
- Turn the key in the ignition while maintaining pressure on the ODO button. till the dash lights turn on. Avoid starting the car.
- Verify that the odometer’s (ODO) total mileage displaytypically the ‘A’ displayis on.
What ‘MAINT REQD’ Means
Within 5000 miles of the last reset, the “MAINT REQD” indicator illuminates. It is merely a mileage counter meant to serve as a reminder to the user that an oil change is required and in no way indicates any system failure. If a specialist has always performed maintenance on your Toyota, they reset it after each oil change. It should be noted that the recommended oil change interval is not always 5000 miles. To find out how frequently the oil in your Camry needs to be changed, consult the owner’s manual and your usual technician.
Need Help?
Our service team would be delighted to assist you. Our entire staff of experts is Toyota-certified and adept in resolving even the most challenging problems with your Toyota. Make an appointment right away!
How can the maintenance light be turned off on a 2007 Toyota Highlander?
When your maintenance light comes on, there probably is an issue. Check everything out and make sure your automobile is road-ready before you reset anything. Follow these instructions to clear the maintenance light on your 2007 Toyota Highlander Hybrid if the lights are the only issue:
- Your maintenance light ought to briefly flash before going out.
- Switch off the ignition.
- Once the entire miles is displayed, press the odometer button.
- As you restart the ignition, press and hold the odometer button.
- Without starting the engine, turn the ignition to the on position.
Maintenance lights are not to be taken lightly. One fault with your engine could trigger serious problems like mechanical failures or even crashes! Before you reset your maintenance light, make sure everything is in working order.
Spend a few minutes with Jerry to reduce your auto insurance costs while the mechanic is looking at your vehicle. The Jerry app, a licensed broker, can help you quickly search and compare rates from more than 50 top providers. Jerry can assist you in purchasing your new plan and even in canceling your old one if you locate a lower rate.
What does it imply if your Toyota has a maintenance required light on?
On your dashboard, the Toyota maintenance light may read “MAINT REQD. It’s a light that is always on and alerts you when you require an oil change at a licensed auto shop. Your Toyota will run more smoothly and efficiently if you change the oil in your car.
Where is the Toyota Highlander’s VSC button?
To switch off your TRAC, just push and hold the VSC Off button next to your gear shift. Near your speedometer, look for the TRAC OFF indication light. You will also find your VSC Off indication light here. Simply press the button once more to turn the TRAC back on.
What does the Toyota Highlander’s maintenance required light mean?
Every 4,500 miles, once the maintenance has been reset, the light turns on for around 3 seconds before flashing for approximately 15 seconds. The majority of the time, this merely indicates that your car may need an oil change. After the maintenance data has been reset, the light will turn on and stay on if more than 5,000 miles have been driven.
How to Reset Maintenance Data on Toyota Corolla
You can easily reset your maintenance data. After the necessary maintenance has been carried out in accordance with the maintenance schedule, proceed as follows:
1. Switch the “engine start/stop switch or trip meter-activated engine shutoff a reading appeared,
2. Turn the trip meter reset switch while pressing the “engine switch ON, engine START STOP switch, etc.
3. Hold the button down while continuing to push it until the trip meter reads 000000.
When you understand what each warning light on your Toyota indicates, maintaining it is easy. Never be afraid to call the service staff at Toyota Palo Alto if you ever wonder whether your car needs any type of maintenance. You can ask our helpful staff for assistance in determining what’s wrong with your car and whether you need to schedule a service appointment.
When your maintenance light illuminates, what should you do?
Simply put, the flashing maintenance required light is alerting you that maintenance on your car is necessary. The indicator will come on when a predetermined period of time has passed since your car’s last service or based on how far you’ve driven it.
This light typically indicates that you should change the oil in your car. The maintenance data will be reset for you when your car has been taken in for service.
To manually reset the system to turn off the light, however, follow these instructions:
When the maintenance light comes on, you can continue to drive, but bear in mind that you are doing so at your own risk if the required or scheduled repair is skipped.
What distinguishes a maintenance requirement from a check engine light?
Many people are unsure of what each of these lights means, and the check engine light and the service engine soon light are frequently confused for one another. We’ll describe how distinct they actually are despite the fact that they appear to be similar.
Authored by: Bradley Hayes, Director of Marketing at Autoscope European Car Repair and Automotive Blogger
Since Karl Benz originally unveiled his Benz Patent Motorwagen, automotive technology has advanced significantly. In fact, the notion that computers are essentially controlling our cars in today’s computer-driven society shouldn’t be shocking. In order to assure the precise right operation of your vehicle’s numerous systems and components, they regulate and track their performance. They even notify the driver when the automobile needs repair or maintenance. While technology hasn’t yet given our cars voices (like Kitt from Knight Rider), it has made it possible for them to communicate in other ways, such as through a series of backlit symbols that show up in your instrument cluster, such as a “check engine” and a “service engine” light.
Why won’t the oil change light turn off?
If your oil light continues to illuminate even after changing the oil in your engine, you should examine the sensor to rule out a faulty sensor as the root of the problem. The oil pump might become clogged with dirt and other debris, leading the sensor to mistakenly report oil problems. Although changing the sensor is pretty straightforward, you should take your car to a qualified mechanic if you don’t feel confident doing it yourself. Low oil pressure is the following typical reason. Your oil light will turn on if the oil pressure drops below 5 pounds per square inch. You should check the oil level even though this shouldn’t happen after an oil change because you never know.
Even after an oil change, the final common cause of a lit oil light is perhaps the most troublesome. Numerous engine problems might result from the oil pump not circulating enough oil to maintain the engine’s parts lubricated and operating as intended. Parts do wear down over time, even though getting oil changes at regular intervals should prevent this issue from happening.
When I turn on my automobile, why does the maintenance required light flash?
If you’re unsure of what a warning light on your dashboard indicates, it can make you feel uneasy. Thankfully, you normally don’t need to worry about it.
A flashing maintenance light is typically your car’s method of telling you that it needs to be serviced soon. The light’s purpose is to alert drivers when it might be time for an oil change or a tune-up by turning on at predetermined intervals.
You have roughly 500 miles left before you need to have your automobile serviced when the light first starts flashing. Your maintenance light will inform you by turning on and staying on when it’s due for service.
Download Jerry, the super insurance expert app, to find the answers to all of your maintenance-related concerns.
Jerry is a powerful tool for finding vehicle insurance discounts, and it can do so in just 45 seconds! Jerry will evaluate prices from the leading insurance companies in the country to get you the cheapest offers, and if you decide to transfer, he can even cancel your current policy!