Okay, in this section, I’ll walk you through the process of turning off the maintenance is necessary light on a 2019 Toyota Camry XV70. Simple and uncomplicated. To do this, we’ll use the steering wheel’s directional pad. Let’s do it now.
In This Article...
Position your car in drive without turning the key
Press the START/STOP button twice without applying the brake if your vehicle has one.
Access the Settings
Find the Settings menu by using the steering wheel’s directional pad to navigate the menu.
the VEHICLE SETTINGS section.
In the settings menu, locate the Vehicle Settings menu. This menu has a car emblem with a tiny gear on it for Camry with a 7-inch display.
- Hit the OK button.
- Opt for SCHEDULED MAINTENANCE.
- Choose “YES”
You’ll be prompted to select Reset Data. Then you’ll choose “yes,” which will finish the reset.
How can you turn off the Toyota Camry’s maintenance needed light?
Push and hold the odometer button on your dashboard briefly, then quickly turn your key to the second position. Hold the odometer button down for a further 10 seconds. The maintenance light should flash and you could hear a beeping if everything is done correctly. Your Toyota Camry’s maintenance light ought to go out after doing that.
Why does the maintenance light not go out?
How do I turn the “Maint Reqd” light back on?
- Switch the ignition to the ON position.
- Set the trip display to TRIP A mode on the odometer.
- Activate the OFF position on the ignition switch.
- Turn the ignition switch to the ON position while pressing and holding the Trip Meter RESET button.
- It will do so via the service maintenance reminder light.
How can my Toyota maintenance be reset?
In order to start the car, turn the ignition to position one after inserting your key. Turn your key to position two after pressing and holding the trip meter reset button on the dashboard. Hold the odometer button down for a further ten seconds. The light should then begin to flash and potentially beep before turning off.
How can the oil life on a 2018 Toyota Camry be checked?
How to Check Your Car’s Oil Levels
- Place the car on a level surface. Before opening the hood, give the engine some time to cool.
- Find the oil dipstick, remove it, and clean it.
- Draw out the dipstick once more after fully re-inserting it.
- Examine the oil level.
Why does my maintenance light come on after I change the oil?
- Release the ODO button once it starts to show zeros, then flip the key back to the “off” position.
- Press and hold the ODO reset / readout button while the engine is off.
- Now the light will read “MAINT REQD.”
- Verify that the odometer’s (ODO) total mileage displaytypically the ‘A’ displayis on.
- If the car is on, turn it off.
- Turn the key in the ignition while maintaining pressure on the ODO button. till the dash lights turn on. Avoid starting the car.
- The ODO display will briefly flash before beginning to display only zeros.
What ‘MAINT REQD’ Means
Within 5000 miles of the last reset, the “MAINT REQD” indicator illuminates. It is merely a mileage counter meant to serve as a reminder to the user that an oil change is required and in no way indicates any system failure. If a specialist has always performed maintenance on your Toyota, they reset it after each oil change. It should be noted that the recommended oil change interval is not always 5000 miles. To find out how frequently the oil in your Camry needs to be changed, consult the owner’s manual and your usual technician.
Need Help?
Our service team would be delighted to assist you. Our entire staff of experts is Toyota-certified and adept in resolving even the most challenging problems with your Toyota. Make an appointment right away!
On a 2018 Toyota Sienna, how do you turn off the maintenance is needed light?
Don’t worry; it’s a simple fix, and our wife won’t know the difference! By doing the following, you can clear the maintenance light on your 2018 Toyota Sienna:
- Set your ignition to ON while your car is in park. All of the lights in your automobile will be turned on, but the engine won’t start. Push the start button twice without applying the brake if your Sienna has one.
- By clicking OK, select MAINTENANCE RESET.
- Using the navigation buttons on the right side of your steering wheel, locate the Settings menu.
- The oil light should be off when you start your automobile.
- To confirm your selection, click YES when prompted.
If the indicator continues to illuminate, your car might be having trouble. Perhaps your wife accidently moved the sensor, or perhaps there is a completely separate issue. In either case, it’s a good idea to consult an expert to make sure your automobile is secure, particularly if the light comes back on.
Why not take a moment to make sure your automobile is covered by a reliable insurance policy while you’re learning more about it? Using the Jerry app, finding the best insurance is quick and easy. Download the app, then select from a wide selection of free quotes after quickly answering a few questions. Jerry drivers save $879 annually on auto insurance.
How can I turn my car’s service light back on?
First, turn on the engine. Step 2: The display will say “Service required” if a service is overdue. Locate and press the OK button at the top right of the steering wheel for longer than one second to clear this message. The service interval will be reset to its default value in Step 3.
How often should the oil be changed in a 2018 Toyota Camry?
For traditional oil, Toyota advises changing your 2018 Toyota Camry’s oil and filter every 3,0005,000 miles. Generally speaking, synthetic oil needs to be changed every 7,500 to 10,000 miles.
The 2018 Camry uses what kind of oil?
The Toyota Camry series has been a leader in pretty much every category, from interior tech sophistication to power and performance under the hood. With this sedan legend, you may reach whatever driving objectives you have, but it will only function at its peak when the proper oil is used. Since each engine is unique, it might be challenging to determine which sort is best for your engine. If, however, you prefer to change your own oil, we have the solution right here. Visit us today to view the recommended oil type for each engine in the 2018 Toyota Camry!
Toyota Camry 2.5-liter Inline 4 oil type
In order to properly maintain your engine, you should aim to use SAE 0W-16 viscosity oil, according to the official 2018 Toyota Camry owner’s manual. This is because of how this oil is created, which gives you the best performance possible when starting your engine in cold weather, operating at high speeds, and doing anything else. However, you’re safe utilizing higher level fluids like SAE 0W-20 oil indoors if SAE 0W-16 is not readily available.
Toyota Camry 3.5-liter V6 oil type
On higher trims of the 2018 Camry, there is also a 3.5-liter V6 engine that produces greater power and has a different arrangement, necessitating the use of a stronger oil. Owner’s instructions advise using SAE 0W-20 for this, while SAE 5W-20 can be used in a pinch if necessary.
How accurate is oil life percentage?
Your neighborhood shop, which had a vested interest in keeping your automobile coming back every 5,000 kilometers, used to provide the answer to the question of when you need to replace your oil. These days, an automobile’s oil life monitoring system is increasingly routinely used to provide an answer to this query. This warning often appears between 8,000 and 13,000 kilometers, saving drivers money and lowering the amount of oil that is disposed of. How dependable are these systems, though? Oil life monitors are pretty trustworthy, according to studies, but they are not nearly as “set it and forget it” as sellers would have you believe. Continue reading to find out how to maintain your oil life monitor correctly and avoid needing to pay for expensive repairs.
Why does my car indicate that maintenance is due soon?
Every 4,500 miles, once the maintenance has been reset, the light turns on for around 3 seconds before flashing for approximately 15 seconds. The majority of the time, this merely indicates that your car may need an oil change. After the maintenance data has been reset, the light will turn on and stay on if more than 5,000 miles have been driven.
How to Reset Maintenance Data on Toyota Corolla
You can easily reset your maintenance data. After the necessary maintenance has been carried out in accordance with the maintenance schedule, proceed as follows:
1. Switch the “engine start/stop switch or trip meter-activated engine shutoff a reading appeared,
2. Turn the trip meter reset switch while pressing the “engine switch ON, engine START STOP switch, etc.
3. Hold the button down while continuing to push it until the trip meter reads 000000.
When you understand what each warning light on your Toyota indicates, maintaining it is easy. Never be afraid to call the service staff at Toyota Palo Alto if you ever wonder whether your car needs any type of maintenance. You can ask our helpful staff for assistance in determining what’s wrong with your car and whether you need to schedule a service appointment.