The purpose of the maintenance light is to remind You to change the filter and feed your 2015 Toyota RAV4 with fresh synthetic SAE 0W-20 motor oil. So get into the driver’s seat, turn the key to the “start” position, and push the starter button to start the car. Once TRIP A appears on the LCD display of the odometer, press the DISP button. Shut off the vehicle. You need to use your other hand to turn the ignition back on, but only to the accessory position, so hold down the DISP button with your non-dominant hand right now! Don’t even attempt to start the car! You should now see the LCD flicker with a sequence of dashes that get smaller until it displays all zeros while you keep holding down the DISP button. You can now let go of the DISP button. Alternatively, you can now turn off the automobile and start it. You should see that the Maintenance Request light is currently off and will remain so for the next 5000 miles before turning back on.
On a 2015 Toyota Rav4, turn the ignition on first, then set the odometer to “odo” to reset the maintenance light. Switch the ignition off. While turning the ignition back on, push and hold the trip reset button.
Turn to trip A to clear the maintenance requirement light on a 2015 Rav4 3.6L. Holding the display down while turning the ignition on, off, on, and resting the car
In This Article...
How can I turn off the Toyota RAV4’s maintenance is required light?
How to Extinguish the Toyota RAV4’s Maintenance Light
- Put the ignition on with your key. Turn the key to the first position.
- On the dashboard, press the reset trip meter button. Hold it down for a couple of seconds.
- Hold the odometer button down for another five or so seconds.
- Release the odometer button after it is off.
How can you turn a 2015 Toyota’s maintenance light back on?
If mechanics neglect to reset the maintenance alert after servicing the car, it may become an annoyance. Fortunately, a 2015 Toyota Sienna’s maintenance light is simple to reset.
Simply adhere to these guidelines to restart the light:
- In addition to pressing and holding the trip odometer button, restart the engine of the car.
- Shut down the van.
- A key is turned to the on position. Alternatively, if your vehicle has a push-button start, you can depress the button twice while keeping your foot off the brake.
- To get the Trip A reading, press the trip odometer button on the instrument cluster.
- The maintenance is necessary light needs to be reset.
You obviously care about your automobile if you take such good care of your Sienna. Therefore, make sure your car is fully insured without paying too much. It is quick and simple with the Jerry app.
Jerry is a certified insurance broker who obtains rates from numerous reputable and highly rated auto insurance providers. Jerry can assist you in purchasing insurance and terminating your current policy after you discover a fantastic quote for your 2015 Toyota Sienna. Customers often save close to $900 annually!
On a Toyota RAV4, how do you change the maintenance light?
In order to start the car, turn the ignition to position one with your key in the ignition. Turn the key to position two while pressing and holding the trip meter reset button on the dashboard. For 10 seconds, keep your finger on the odometer button. Then the light should flash, beep, and finally turn off.
How can I dim the maintenance is necessary light?
How do I turn the “Maint Reqd” light back on?
- Switch the ignition to the ON position.
- Set the trip display to TRIP A mode on the odometer.
- Activate the OFF position on the ignition switch.
- Turn the ignition switch to the ON position while pressing and holding the Trip Meter RESET button.
- It will do so via the service maintenance reminder light.
How can you turn a Toyota’s maintenance light back on?
In order to start the car, turn the ignition to position one after inserting your key. Turn your key to position two after pressing and holding the trip meter reset button on the dashboard. Hold the odometer button down for a further ten seconds. The light should then begin to flash and potentially beep before turning off.
What does “maintenance necessary” on my Toyota Rav4 mean?
The significance of the emblem MAINT REQD is significant. The MAINT REQD light indicates when the vehicle’s scheduled maintenance is due when it illuminates. If your car is under two years old, this service can be covered by your ToyotaCare plan.
What does “immediate maintenance required” on my car mean?
The mileage is the only factor that activates the maintenance required light, also known as the service required light. When this light turns on, different automakers have varying standards. For instance, the maintenance needed light on a car might turn on once every 10,000 lights and stay lit until it is manually turned off.
The oil change, spark plug replacement, new tire, etc. are just a few examples of the routine maintenance that should be performed on a vehicle.
When servicing your vehicle, mechanics typically reset the maintenance required light. The process for resetting the maintenance required light differs based on the make and type of the car, yet, if they don’t, you can do it yourself.
Why does my maintenance light come on after I change the oil?
- Turn the key in the ignition while maintaining pressure on the ODO button. till the dash lights turn on. Avoid starting the car.
- Now the light will read “MAINT REQD.”
- The ODO display will briefly flash before beginning to display only zeros.
- Press and hold the ODO reset / readout button while the engine is off.
- Verify that the odometer’s (ODO) total mileage displaytypically the ‘A’ displayis on.
- If the car is on, turn it off.
- Release the ODO button once it starts to show zeros, then flip the key back to the “off” position.
What ‘MAINT REQD’ Means
Within 5000 miles of the last reset, the “MAINT REQD” indicator illuminates. It is merely a mileage counter meant to serve as a reminder to the user that an oil change is required and in no way indicates any system failure. If a specialist has always performed maintenance on your Toyota, they reset it after each oil change. It should be noted that the recommended oil change interval is not always 5000 miles. To find out how frequently the oil in your Camry needs to be changed, consult the owner’s manual and your regular mechanic.
Need Help?
Our service team would be delighted to assist you. Our entire staff of experts is Toyota-certified and adept in resolving even the most challenging problems with your Toyota. Make an appointment right away!
What happens after I change the oil in my car?
Reset Oil Change Indicator
- Turn on the ignition.
- Both the stop and accelerator pedals should be fully depressed.
- Maintain firm pressure on the brake and accelerator pedals.
- A notice verifying the reset process is ongoing appears after three seconds.
When your maintenance light illuminates, what should you do?
Simply put, the flashing maintenance required light is alerting you that maintenance on your car is necessary. The indicator will come on when a predetermined period of time has passed since your car’s last service or based on how far you’ve driven it.
This light typically indicates that you should change the oil in your car. The maintenance data will be reset for you when your car has been taken in for service.
To manually reset the system to turn off the light, however, follow these instructions:
When the maintenance light comes on, you can continue to drive, but bear in mind that you are doing so at your own risk if the required or scheduled repair is skipped.
On a 2016 Toyota 4runner, how do you turn the maintenance light back on?
Usually, even after servicing, a vehicle’s maintenance light needs to be manually reset. So don’t be alarmed; this is very natural.
Follow these fast and simple procedures to reset the maintenance light on your 2016 Toyota 4Runner:
- Alternately, turn the ignition to auxiliary mode or ON. Never start the car.
- To see ODO, press the trip display.
- Switch the ignition to “OFF.”
- While turning your car back on, keep holding down the trip reset button.
Now that the maintenance indicator should be off, you can drive a little more comfortably knowing that your vehicle is up to date.
With Jerry, there is still another method to drive safely. The Jerry app instantly compiles rates from more than 50 leading insurance providers, including Nationwide and Allstate! Once you’ve decided, they even assist you in canceling your old coverage.
What does it imply if your Toyota has a maintenance required light on?
On your dashboard, the Toyota maintenance light may read “MAINT REQD. It’s a light that is always on and alerts you when you require an oil change at a licensed auto shop. Your Toyota will run more smoothly and efficiently if you change the oil in your car.
Does the need for maintenance equate to a check engine light?
Some motorists could mistake the check engine light for the service or maintenance necessary light on the instrument cluster. These alert lights are not connected. The service required light simply indicates that the vehicle needs an oil change or other standard maintenance.