How To Reset Maint Reqd On Toyota Tundra

Toyota / By
  • Choose “Vehicle Settings” from the multi-information display.
  • A maintenance reset is chosen.
  • Select “YES” and hit it.

How can the maintenance needed light on a 2013 Toyota Tundra be reset?

  • Without starting the engine, turn the ignition to the “On position. If your car has a push-button ignition, press “Start” without depressing the brake pedal.
  • By pushing the display change button or “Trip button,” you can change the display to “Trip A.”
  • Completely shut off the car.
  • Keep holding down the “Trip button.”
  • Hold the “Trip button down while turning the ignition to “On without starting the car.
  • Release the “Trip button” whenever the trip meter reads “all zeros.”

How can you get rid of the need for maintenance?

How do I turn the “Maint Reqd” light back on?

  • Switch the ignition to the ON position.
  • Set the trip display to TRIP A mode on the odometer.
  • Activate the OFF position on the ignition switch.
  • Turn the ignition switch to the ON position while pressing and holding the Trip Meter RESET button.
  • It will do so via the service maintenance reminder light.

How can the maintenance needed light on a 2005 Toyota Tundra be reset?

  • Make sure the tripmeter is lit up on the vehicle’s odometer when the ignition is in the ON position, then switch it to the OFF position.
  • Press and hold the MODE or TRIP reset button.
  • Switch the ignition to the ON position while holding the reset button.

**To activate the Key On/Engine Off mode using the Engine Start/Stop button, depress the button twice while keeping your foot off the brake pedal.

  • Hold the reset button down until the odometer shows “000000 is shown before the initial value.
  • Ensure the reset was acknowledged by turning the vehicle on and off again.
  • Press SETUP on the navigation screen.
  • Press VEHICLE, then MAINTENANCE after that.
  • To reset an item, touch the desired item (i.e. Engine Oil, Oil Filter, Tire Rotation, etc.)
  • Fill in the necessary fields with the new information after this “Following Service period (i.e. date and distance till next service is due)
  • Click OK when finished.
  • Steps 3-5 must be repeated for any additional services rendered.
  • You can press INFO or SETUP on the navigation screen.
  • Next click MAINTENANCE.
  • Fill up the necessary fields with the new information after this “Next Service Interval (i.e., the day or time till the next service is due)
  • Make that the odometer is shown with the ignition switch in the ON position, then switch it to the OFF position.
  • Hold the reset button down until the odometer shows “the MAINT REQD light flashes, or 000000

These reset instructions should be useful to you, we hope. With our mobile app Oil Reset Pro, which is available in the Apple and Google Play stores, you can always have this method at your fingertips along with the rest of the domestic, Asian, and European manual maintenance reset procedures. To get a free download from the shop right away, click the links below.

Why does my maintenance light come on after I change the oil?

  • Now the light will read “MAINT REQD.”
  • If the car is on, turn it off.
  • Turn the key in the ignition while maintaining pressure on the ODO button. till the dash lights turn on. Avoid starting the car.
  • Press and hold the ODO reset / readout button while the engine is off.
  • The ODO display will briefly flash before beginning to display only zeros.
  • Release the ODO button once it starts to show zeros, then flip the key back to the “off” position.
  • Verify that the odometer’s (ODO) total mileage displaytypically the ‘A’ displayis on.

What ‘MAINT REQD’ Means

Within 5000 miles of the last reset, the “MAINT REQD” indicator illuminates. It is merely a mileage counter meant to serve as a reminder to the user that an oil change is required and in no way indicates any system failure. If a specialist has always performed maintenance on your Toyota, they reset it after each oil change. It should be noted that the recommended oil change interval is not always 5000 miles. To find out how frequently the oil in your Camry needs to be changed, consult the owner’s manual and your usual technician.

Need Help?

Our service team would be delighted to assist you. Our entire staff of experts is Toyota-certified and adept in resolving even the most challenging problems with your Toyota. Make an appointment right away!

How can I clear the maintenance message on my Toyota?

A Toyota Maintenance Light Reset

  • In order to start the car, turn the ignition to position one after inserting your key.
  • Turn your key to position two after pressing and holding the trip meter reset button on the dashboard.
  • Hold the odometer button down for a further ten seconds.

How can I turn off the Toyota maintenance is required light?

Turn the key to position two while pressing and holding the odometer button on the dashboard. When the maintenance light begins to flash, keep holding the odometer button. There may even be beeping sounds. The light ought to dim.

Why is still on my maintenance light?

Every 4,500 miles, once the maintenance has been reset, the light turns on for around 3 seconds before flashing for approximately 15 seconds. The majority of the time, this merely indicates that your car may need an oil change. After the maintenance data has been reset, the light will turn on and stay on if more than 5,000 miles have been driven.

How to Reset Maintenance Data on Toyota Corolla

You can easily reset your maintenance data. After the necessary maintenance has been carried out in accordance with the maintenance schedule, proceed as follows:

1. Switch the “engine start/stop switch or trip meter-activated engine shutoff a reading appeared,

2. Turn the trip meter reset switch while pressing the “engine switch ON, engine START STOP switch, etc.

3. Hold the button down while continuing to push it until the trip meter reads 000000.

When you understand what each warning light on your Toyota indicates, maintaining it is easy. Never be afraid to call the service staff at Toyota Palo Alto if you ever wonder whether your car needs any type of maintenance. You can ask our helpful staff for assistance in determining what’s wrong with your car and whether you need to schedule a service appointment.

Why does my Toyota’s maintenance indicator constantly flashing?

Toyota’s maintenance reminder system only serves to remind the motorist to have their car’s oil changed. The engine light will turn on after 5,000 miles of driving since the computer counts the engine’s mileage from the time it was reset. The system does not account for the changes between mild and extreme driving situations, load weight, towing, or weather conditions, all of which are significant factors that affect oil life because it is not algorithm driven, unlike other more sophisticated maintenance reminder systems.

Because of this, people who regularly tow or drive in adverse weather conditions and require more frequent oil changes may find the maintenance light ineffective. However, for individuals who frequently use the motorway in good weather, it might not be practical. This is not to suggest that a driver should completely ignore the maintenance light. Keep an eye on your driving circumstances throughout the year and, if necessary, have a professional assess your unique, most frequent driving conditions to determine whether or not your car need servicing.

The table below can help you estimate how frequently you would need to change the oil in a current car (earlier cars typically require more regular oil changes):

How can I turn off the Toyota Tacoma’s maintenance is required light?

The convenience of having a car-savvy family member must be incredible! Yes, you can manually reset your light as you are aware that your car is in good condition.

Turn off your vehicle, then push and hold the odometer reset button to turn off the maintenance light on a Toyota Tacoma. Odo/Trip is the typical label for this button. Hold the button down as you restart the ignition of your car.

Your maintenance light ought to be back on now! By starting your car as usual and waiting a few seconds, you can ensure that the light remains off. Visit a professional to ensure that your automobile and your sensors are in good working order if the light does indeed come back on.

Although automobile repairs might be expensive, Jerry can help you save money on other auto-related costs. Jerry is a free insurance comparison software that checks around for the best deals with more than 50 different insurance providers. You may make adjustments at any time, receive prices instantly, and text an agent with any queries you may have. Every year, the typical Jerry user saves $879.

Why won’t the oil change light turn off?

If your oil light continues to illuminate even after changing the oil in your engine, you should examine the sensor to rule out a faulty sensor as the root of the problem. The oil pump might become clogged with dirt and other debris, leading the sensor to mistakenly report oil problems. Although changing the sensor is pretty straightforward, you should take your car to a qualified mechanic if you don’t feel confident doing it yourself. Low oil pressure is the following typical reason. Your oil light will turn on if the oil pressure drops below 5 pounds per square inch. You should check the oil level even though this shouldn’t happen after an oil change because you never know.

Even after an oil change, the final common cause of a lit oil light is perhaps the most troublesome. Numerous engine problems might result from the oil pump not circulating enough oil to maintain the engine’s parts lubricated and operating as intended. Parts do wear down over time, even though getting oil changes at regular intervals should prevent this issue from happening.