The failing ABS or brake assist system is indicated by the ABS warning light.
In This Article...
Headlight indicator (U.S.A.)
informs you that the headlights, taillights, instrument panel lights, parking lights, license plate lights, and side marker lights are all on.
Low fuel level warning light
notifies you when the fuel is running low. For more detailed information on how much petrol is left in your Toyota, consult the owner’s manual.
Maintenance required reminder
At our Toyota dealership in Morrow, many of the new Toyota models we have available for sale are equipped with a maintenance-required reminder light to make sure you perform the needed maintenance.
Security indicator
When the ENGINE START STOP switch is turned off in a car equipped with a smart key system, the light flashes to indicate that the system is working. The light will flash on Toyota vehicles without a Smart Key System once the key is taken out of the ignition.
Slip indicator
The slip indicator will light up when your car starts to lose traction and slide. You will be informed that the VSC/TRAC systems are operational via this.
SRS airbag on-off indicator
You can tell if the passenger air bag is on or off by looking at the AIRBAG ON and AIRBAG OFF light, which lights. To properly activate or deactivate the airbag, this device senses the conditions of the front passenger seat.
TRAC OFF Indicator & VSC Off Indicator
informs you whether TRAC and/or VSC have been turned off. TRAC and BSC can reduce engine output to the wheels if your Toyota becomes stuck in fresh snow or mud. When the system is turned off, you might be able to liberate the car by rocking it back and forth. For information on how to disable this function in your individual model, contact our Toyota service team.
How can the airbag light be turned off?
You can avoid a trip to the dealer or mechanic by resetting the airbag light on your car in the garage at your house. The SRS light (supplemental restraint system), commonly known as the airbag light, illuminates on the instrument panel of the car typically only after an accident and after the airbag has been deployed. However, there are other situations that could set off the SRS light, like when a new radio is installed or when there is a problem with the airbag system itself. You can reset the airbag light yourself using a handheld computer tool that you can get from an auto parts store once all repairs have been made.
Step 2
Pay attention for the airbag light to activate. It will remain lit for seven seconds before turning off on its own. Turn the switch off right away and wait three seconds after it shuts off.
Step 3
Start the car. The SRS light should illuminate for seven seconds before going out completely. Resetting the airbag light was done.
- David; 2003. “OBD II Fault Codes Reference Guide”
- Martin; 2008, “How To Use Automotive Diagnostic Scanners (Motorbooks Workshop)”
- clock or watch with a second hand
- You run the danger of the airbag inflating unintentionally if you keep driving while the SRS light is on.
Can the airbag light self-reset?
It’s time to discover how to reset the airbag light now that we understand how airbags work. If you are not completely confident in your abilities, have only professionals operate on the airbag system. To reset the airbag light, adhere to these instructions:
Step 1: Check the passenger airbag switch
There is a “passenger seat Airbag on/off button” in some autos. When attempting to remove the airbag light, you ought to start by doing this. It’s possible that someone turned it to Off by accident before you, which will cause the airbag light to remain on in most cars. If you open the passenger door or glove box, you might be able to view this button, which is often located on the passenger side of the dashboard.
Step 2: Read the trouble codes with an OBD2 Scanner
Working with your airbag system is essential, therefore always use an OBD2 scanner to read the fault codes to determine where to begin troubleshooting. Never resolve the issue brought on by the airbag light before clearing the trouble codes. Continue the diagnostic by reading the codes to learn what might be the issue’s cause.
Step 3: Repair the fault
Never simply reset the airbag light without fixing the issue. When a collision occurs, this may cause the airbags to deploy or not work at all. If you are unsure of how to repair the airbag’s parts, let a pro handle it. Always remember to disconnect the battery connection before servicing an airbag. After fixing the issue, the airbag light frequently goes away by itself, although not in all car types.
Step 4: Clear the trouble codes
It’s time to reset the engine light when you have completely installed the new parts and are confident that everything is installed correctly. There is no other way to accomplish this; you must use an OBD2 scanner. Make that the airbag light is reset and that it no longer appears on the dashboard. If the problem persists, read the codes again and look for any error codes.
Step 5: Restart your car & test-drive.
Restart your engine and take a test drive if your dashboard’s airbag light appears to have disappeared. After a test drive, if the airbag light has disappeared, there is a good likelihood that the issue has been resolved. Reread the codes and carry out the steps again if the issue reappears.
What is the cost of turning the airbag light back on?
Reset Airbag Light, at No. 1 This procedure typically takes several hours and costs a few hundred dollars, though depending on the car, it might cost as much as $600.
When my airbag light is on, can I drive?
The airbag light may have illuminated for any number of reasons, just like other warning lights. Here are a few of the most frequent causes:
The airbag needs resetting
The airbag light will turn on if there has been a collision but it wasn’t serious enough for the airbags to deploy. At your neighborhood garage, the airbag needs to be reset.
Corroded sensors
The sensors in your automobile may have deteriorated if it has water damage. This would lead to a malfunction in the system and turn on the airbag light.
Dislodged wiring
If your car has side airbags, the passenger side airbag may occasionally malfunction. When the passenger seat is shifted back and forth, the wires for that airbag may become damaged or displaced. We caution against attempting to reconnect a detached plug because you risk setting off the airbag. Make an appointment for your car at a nearby garage and ask them to check it.
Faulty seat belt
Your seat belt sensor can be the cause of the problem. The sensor that determines whether or not you have buckled up can malfunction occasionally. When this occurs, the airbag light can start to illuminate.
Your airbag clock spring may need replacing
The spring is intended to preserve continuity between the wiring and the driver’s airbag and coils throughout your steering wheel. The spring may wear out and fail over time, turning on the airbag warning light. Older autos are more likely to have this flaw.
The important line is that you must stop driving as soon as your airbag light illuminates and have your automobile inspected by a repair as soon as possible. Your airbags won’t activate until the issue is identified and remedied. Never disregard your airbag light since your safety and the safety of your passengers are top priorities.
Can a blown fuse turn on the airbag light?
The car could have blown a fuse, for example. There are other fuses that could be to blame, but fuse #13 is most likely the one. You probably need to change fuse #13 and perhaps other fuses if your airbag light is on and your rear windshield wiper is not working. The airbag light can undoubtedly turn on as a result of blown fuses.
The airbag light may also abruptly turn on in a number of other situations. A mechanic or auto parts store should be able to decipher the code that the airbag system emits when it is acting up, which will give them a hint as to what specific issue the airbag is experiencing. There are numerous potential issues with the airbag because it is a complicated system of sensors, wiring, and programming that must suddenly activate during an accident after lying dormant for years. Check the fuse box to see whether you have a blown fuse first, but if not, you’ll likely need to take it to the dealer or a qualified mechanic for service.
What is the cost of an airbag sensor?
Depending on the automobile model and labor charges, the cost to replace an airbag sensor ranges from $100 to $600. A sensor for an airbag costs between $50 and $300, as does the labor.
Both the airbag sensor and its replacement are delicate parts. Even for an expert, correctly diagnosing and installing the airbag sensor can take up to two hours.
The airbag sensor itself is typically not very expensive; you may anticipate paying between $50 and $300 for a brand-new one. Never purchase aftermarket sensors; don’t take the chance. Always purchase OEM original, authentic items.
You can save money by replacing the airbag sensor yourself if you are highly confident working on cars and meticulously following the repair manual.
If you have even the least qualms regarding the replacement, have a pro handle it.
Keep in mind that it is a crucial component, therefore installing it properly is important in case of an accident. Additionally, if you make a mistake, there is a chance that all of the airbags in the car will deploy, which will cost thousands of dollars to fix.