Your 2017 Toyota Sienna’s maintenance light will illuminate to let you know when maintenance is required. This might be as straightforward as an oil change or as comprehensive as a 60,000 mile service. If Toyota handles the work, they will reset the light for You; but, if You handle the work on Your own, you must take the actions listed below. Prior to starting the engine, you must turn the ignition to the On position. After that, while continuing to press the Odometer/Reset button down, turn the ignition to the Off position, then back to the On position. After that, all you have to do to get going is turn the automobile off.
In a 2017 Toyota Sienna, the maintenance indicator should be reset. The oil light will be reset by turning the vehicle on with the engine off, holding down the odometer reset button, and then turning the vehicle off and back on.
In This Article...
How can the maintenance needed light on a Toyota Sienna be reset?
In many vehicles, persistent maintenance lights are a regular problem. Typically, there is no electrical issue; instead, your mechanic just neglected to reset the alert after your service was finished.
Just adhere to these simple steps to reset the maintenance required light on your Toyota Sienna:
- Put your ignition key in accessory mode. You shouldn’t start your engine.
- Find the ODO/TRIP button and press it until ODO appears on the display.
- OFFSET your Sienna.
- As you continue to hold down the ODO/TRIP button, turn on your car.
- You have reset the maintenance light when the odometer display shows just zeros.
- Once more, turn off your car.
Your car is not in need of maintenance, so you can drive with a little more confidence now that the maintenance light is off. Check out the Jerry app to see how much you could be saving on auto insurance before you get back on the road.
After you download Jerry, all you need to do is respond to a few questions that will take you around 45 seconds to do, and you’ll get car insurance rates for coverage that is identical to your current plan right away. Customers of Jerry save $879 year on average.
On a 2018 Toyota Sienna, how do you turn the maintenance light back on?
Don’t worry; it’s a simple fix, and our wife won’t know the difference! By doing the following, you can clear the maintenance light on your 2018 Toyota Sienna:
- To confirm your selection, click YES when prompted.
- Set your ignition to ON while your car is in park. All of the lights in your automobile will be turned on, but the engine won’t start. Push the start button twice without applying the brake if your Sienna has one.
- Using the navigation buttons on the right side of your steering wheel, locate the Settings menu.
- The oil light should be off when you start your automobile.
- By clicking OK, select MAINTENANCE RESET.
If the indicator continues to illuminate, your car might be having trouble. Perhaps your wife accidently moved the sensor, or perhaps there is a completely separate issue. In either case, it’s a good idea to consult an expert to make sure your automobile is secure, particularly if the light comes back on.
Why not take a moment to make sure your automobile is covered by a reliable insurance policy while you’re learning more about it? Using the Jerry app, finding the best insurance is quick and easy. Download the app, then select from a wide selection of free quotes after quickly answering a few questions. Jerry drivers save $879 annually on auto insurance.
How can I clear the maintenance message on my Toyota?
A Toyota Maintenance Light Reset
- In order to start the car, turn the ignition to position one after inserting your key.
- Turn your key to position two after pressing and holding the trip meter reset button on the dashboard.
- Hold the odometer button down for a further ten seconds.
On a 2015 Toyota Sienna, how do you turn the maintenance light back on?
If mechanics neglect to reset the maintenance alert after servicing the car, it may become an annoyance. Fortunately, a 2015 Toyota Sienna’s maintenance light is simple to reset.
Simply adhere to these guidelines to restart the light:
- Shut down the van.
- In addition to pressing and holding the trip odometer button, restart the engine of the car.
- The maintenance is necessary light needs to be reset.
- To get the Trip A reading, press the trip odometer button on the instrument cluster.
- A key is turned to the on position. Alternatively, if your vehicle has a push-button start, you can depress the button twice while keeping your foot off the brake.
You obviously care about your automobile if you take such good care of your Sienna. Therefore, make sure your car is fully insured without paying too much. It is quick and simple with the Jerry app.
Jerry is a certified insurance broker who obtains rates from numerous reputable and highly rated auto insurance providers. Jerry can assist you in purchasing insurance and terminating your current policy after you discover a fantastic quote for your 2015 Toyota Sienna. Customers often save close to $900 annually!
Why does my maintenance light come on after I change the oil?
- Turn the key in the ignition while maintaining pressure on the ODO button. till the dash lights turn on. Avoid starting the car.
- Release the ODO button once it starts to show zeros, then flip the key back to the “off” position.
- Now the light will read “MAINT REQD.”
- The ODO display will briefly flash before beginning to display only zeros.
- Press and hold the ODO reset / readout button while the engine is off.
- If the car is on, turn it off.
- Verify that the odometer’s (ODO) total mileage displaytypically the ‘A’ displayis on.
What ‘MAINT REQD’ Means
Within 5000 miles of the last reset, the “MAINT REQD” indicator illuminates. It is merely a mileage counter meant to serve as a reminder to the user that an oil change is required and in no way indicates any system failure. If a specialist has always performed maintenance on your Toyota, they reset it after each oil change. It should be noted that the recommended oil change interval is not always 5000 miles. To find out how frequently the oil in your Camry needs to be changed, consult the owner’s manual and your usual technician.
Need Help?
Our service team would be delighted to assist you. Our entire staff of experts is Toyota-certified and adept in resolving even the most challenging problems with your Toyota. Make an appointment right away!
My maintenance is necessary light is on, why?
The mileage is the only factor that activates the maintenance required light, also known as the service required light. When this light turns on, different automakers have varying standards. For instance, the maintenance needed light on a car might turn on once every 10,000 lights and stay lit until it is manually turned off.
The oil change, spark plug replacement, new tire, etc. are just a few examples of the routine maintenance that should be performed on a vehicle.
When servicing your vehicle, mechanics typically reset the maintenance required light. The process for resetting the maintenance required light differs based on the make and type of the car, yet, if they don’t, you can do it yourself.
What kind of oil does a 2017 Sienna consume?
The 3.5-liter V6 in the 2017 Sienna can hold 5.8 quarts (5.5 liters) of oil.
It’s crucial to understand that oil displacement and oil capacity are not the same thing if you come across the phrase during your investigation. Oil capacity is just the amount of oil you need to use to accomplish an adequate oil change, whereas displacement refers to the actual amount of oil the engine’s cylinders need to function effectively.
What kind of oil does a 2017 Toyota Sienna need?
Okay, you now know how much oil to add to your Sienna, but we still need to discuss the proper kind of oil. Don’t buy anything just yet because not all engines require the same type of oil.
But what is 0W-20 oil? By looking at the characters and numbers, you can decipher it. The W stands for winter, while the digits indicate the viscosity (thickness) of the oil. The 0 before the W tells us that the oil retains a low viscosity at very low temperatures, and the 20 tells us that it also maintains a thin consistency at very high temperatures.
According to these figures, the oil will function effectively regardless of the engine temperature, and its low viscosity will help your engine last longer.
If you’re still unsure about the type of oil to purchase, take into account these three possibilities: