How To Reset 2017 Toyota Camry Maintenance Light

Before attempting to reset the light, carefully read the next few instructions. To reset the maintenance light, make sure the car is in Trip A.

Step 1: Place your key in the ignition and keep it in the first position (there should be two settings you can turn your key to before it begins to start your car).

Step 2: Hold the odometer button on your dashboard depressed for three seconds after turning the key to position 1 and inserting it in the ignition (this should be the second resting spot between position 1 and turning the key to start the engine).

Step 3: Hold the odometer button down while holding the key in position 2 for roughly 10 seconds. The maintenance light should start to flash and eventually turn off (there might be a beeping sound).

Step 4: After the maintenance light has turned off, remove your finger from the odometer button and start your car by turning the key. If the light is still on when the car begins, you might need to quickly repeat steps 1 and 2 of the procedure. The light shouldn’t be there when the car starts.

How can you turn a Toyota Camry’s maintenance light back on?

Push and hold the odometer button on your dashboard briefly, then quickly turn your key to the second position. Hold the odometer button down for a further 10 seconds. The maintenance light should flash and you could hear a beeping if everything is done correctly. Your Toyota Camry’s maintenance light ought to go out after doing that.

How can I turn off the Toyota maintenance is required light?

Turn the key to position two while pressing and holding the odometer button on the dashboard. When the maintenance light begins to flash, keep holding the odometer button. There may even be beeping sounds. The light ought to dim.

How can my Toyota maintenance be reset?

In order to start the car, turn the ignition to position one after inserting your key. Turn your key to position two after pressing and holding the trip meter reset button on the dashboard. Hold the odometer button down for a further ten seconds. The light should then begin to flash and potentially beep before turning off.

Why does my maintenance light come on after I change the oil?

  • Turn the key in the ignition while maintaining pressure on the ODO button. till the dash lights turn on. Avoid starting the car.
  • Now the light will read “MAINT REQD.”
  • Release the ODO button once it starts to show zeros, then flip the key back to the “off” position.
  • Verify that the odometer’s (ODO) total mileage displaytypically the ‘A’ displayis on.
  • Press and hold the ODO reset / readout button while the engine is off.
  • The ODO display will briefly flash before beginning to display only zeros.
  • If the car is on, turn it off.

What ‘MAINT REQD’ Means

Within 5000 miles of the last reset, the “MAINT REQD” indicator illuminates. It is merely a mileage counter meant to serve as a reminder to the user that an oil change is required and in no way indicates any system failure. If a specialist has always performed maintenance on your Toyota, they reset it after each oil change. It should be noted that the recommended oil change interval is not always 5000 miles. To find out how frequently the oil in your Camry needs to be changed, consult the owner’s manual and your usual technician.

Need Help?

Our service team would be delighted to assist you. Our entire staff of experts is Toyota-certified and adept in resolving even the most challenging problems with your Toyota. Make an appointment right away!

Why does the maintenance light not go out?

How do I turn the “Maint Reqd” light back on?

  • Switch the ignition to the ON position.
  • Set the trip display to TRIP A mode on the odometer.
  • Activate the OFF position on the ignition switch.
  • Turn the ignition switch to the ON position while pressing and holding the Trip Meter RESET button.
  • It will do so via the service maintenance reminder light.

Why does the maintenance required message on my 2017 Toyota Corolla?

On your dashboard, the Toyota maintenance light may read “MAINT REQD. It’s a light that is always on and alerts you when you require an oil change at a licensed auto shop. Your Toyota will run more smoothly and efficiently if you change the oil in your car.

My maintenance is necessary light is on, why?

The mileage is the only factor that activates the maintenance required light, also known as the service required light. When this light turns on, different automakers have varying standards. For instance, the maintenance needed light on a car might turn on once every 10,000 lights and stay lit until it is manually turned off.

The oil change, spark plug replacement, new tire, etc. are just a few examples of the routine maintenance that should be performed on a vehicle.

When servicing your vehicle, mechanics typically reset the maintenance required light. The process for resetting the maintenance required light differs based on the make and type of the car, yet, if they don’t, you can do it yourself.

Why does my Toyota’s maintenance indicator constantly flashing?

Toyota’s maintenance reminder system only serves to remind the motorist to have their car’s oil changed. The engine light will turn on after 5,000 miles of driving since the computer counts the engine’s mileage from the time it was reset. The system does not account for the changes between mild and extreme driving situations, load weight, towing, or weather conditions, all of which are significant factors that affect oil life because it is not algorithm driven, unlike other more sophisticated maintenance reminder systems.

Because of this, people who regularly tow or drive in adverse weather conditions and require more frequent oil changes may find the maintenance light ineffective. However, for individuals who frequently use the motorway in good weather, it might not be practical. This is not to suggest that a driver should completely ignore the maintenance light. Keep an eye on your driving circumstances throughout the year and, if necessary, have a professional assess your unique, most frequent driving conditions to determine whether or not your car need servicing.

The table below can help you estimate how frequently you would need to change the oil in a current car (earlier cars typically require more regular oil changes):