automobiles without a smart key system
1. Switch on the engine (one position before starting engine).
2. Verify the trip meter Readings are displayed. Switch off the ignition.
3. Set the ignition to run while maintaining pressure on the trip meter reset knob (one position before starting engine).
4. Keep the knob depressed for at least 5 seconds. “000000” appears on the odometer, and the light turns off. The LED will keep blinking if the system can’t be reset.
5. To make sure the indication has been reset, turn off the ignition and then turn on the engine.
1. Slightly depress the “ENGINE START STOP” switch (do not start engine).
3. Press the “ENGINE START STOP” switch once while simultaneously pressing the Trip Meter reset button (do not start engine).
4. Hold down the button while continuing to press it until the trip meter reads “000000” or, if equipped, “COMPLETE.”
In This Article...
How can the maintenance needed light on a Toyota Sienna be reset?
In many vehicles, persistent maintenance lights are a regular problem. Typically, there is no electrical issue; instead, your mechanic just neglected to reset the alert after your service was finished.
Just adhere to these simple steps to reset the maintenance required light on your Toyota Sienna:
- Put your ignition key in accessory mode. You shouldn’t start your engine.
- Find the ODO/TRIP button and press it until ODO appears on the display.
- OFFSET your Sienna.
- As you continue to hold down the ODO/TRIP button, turn on your car.
- You have reset the maintenance light when the odometer display shows just zeros.
- Once more, turn off your car.
Your car is not in need of maintenance, so you can drive with a little more confidence now that the maintenance light is off. Check out the Jerry app to see how much you could be saving on auto insurance before you get back on the road.
After you download Jerry, all you need to do is respond to a few questions that will take you around 45 seconds to do, and you’ll get car insurance rates for coverage that is identical to your current plan right away. Customers of Jerry save $879 year on average.
On a 2013 Toyota Sienna, how do you turn the maintenance light back on?
Absolutely! By doing the following, you can turn off the maintenance light on your 2013 Toyota Sienna:
- Ensure that Trip A is selected on your odometer.
- Turn off your vehicle.
- To reset the odometer, press and hold the button. On your dashboard, next to the speedometer, is the button.
- Turn on your car while holding down the button.
- Press the button again after your trip. The mileage on a car is 0.
- Press the button again to turn off your car.
- The maintenance light ought to be off the next time you start your car!
Why not spend a little more time learning about your alternatives for auto insurance while you’re taking the time to reset your maintenance light? With the Jerry app, it’s simple. To receive a comprehensive list of quotations for policies identical to your current one, simply download the app and respond to a few brief questions. The typical user saves $879 yearly!
How can you turn a 2011 Toyota’s maintenance light back on?
Press the odometer button on your dashboard quickly, hold it there while turning the key to the second position. Hold the odometer button down for a further 10 seconds. You can hear a beeping noise in addition to the maintenance light beginning to flash. The light ought should thereafter go out.
On a 2015 Toyota Sienna, how do you turn the maintenance light back on?
If mechanics neglect to reset the maintenance alert after servicing the car, it may become an annoyance. Fortunately, a 2015 Toyota Sienna’s maintenance light is simple to reset.
Simply adhere to these guidelines to restart the light:
- In addition to pressing and holding the trip odometer button, restart the engine of the car.
- A key is turned to the on position. Alternatively, if your vehicle has a push-button start, you can depress the button twice while keeping your foot off the brake.
- The maintenance is necessary light needs to be reset.
- To get the Trip A reading, press the trip odometer button on the instrument cluster.
- Shut down the van.
You obviously care about your automobile if you take such good care of your Sienna. Therefore, make sure your car is fully insured without paying too much. It is quick and simple with the Jerry app.
Jerry is a certified insurance broker who obtains rates from numerous reputable and highly rated auto insurance providers. Jerry can assist you in purchasing insurance and terminating your current policy after you discover a fantastic quote for your 2015 Toyota Sienna. Customers often save close to $900 annually!
What does it imply if your Toyota has a maintenance required light on?
On your dashboard, the Toyota maintenance light may read “MAINT REQD. It’s a light that is always on and alerts you when you require an oil change at a licensed auto shop. Your Toyota will run more smoothly and efficiently if you change the oil in your car.
Why does the maintenance light not go out?
How do I turn the “Maint Reqd” light back on?
- Switch the ignition to the ON position.
- Set the trip display to TRIP A mode on the odometer.
- Activate the OFF position on the ignition switch.
- Turn the ignition switch to the ON position while pressing and holding the Trip Meter RESET button.
- It will do so via the service maintenance reminder light.
Why does my maintenance light come on after I change the oil?
- Turn the key in the ignition while maintaining pressure on the ODO button. till the dash lights turn on. Avoid starting the car.
- Now the light will read “MAINT REQD.”
- Verify that the odometer’s (ODO) total mileage displaytypically the ‘A’ displayis on.
- Release the ODO button once it starts to show zeros, then flip the key back to the “off” position.
- The ODO display will briefly flash before beginning to display only zeros.
- Press and hold the ODO reset / readout button while the engine is off.
- If the car is on, turn it off.
What ‘MAINT REQD’ Means
Within 5000 miles of the last reset, the “MAINT REQD” indicator illuminates. It is merely a mileage counter meant to serve as a reminder to the user that an oil change is required and in no way indicates any system failure. If a specialist has always performed maintenance on your Toyota, they reset it after each oil change. It should be noted that the recommended oil change interval is not always 5000 miles. To find out how frequently the oil in your Camry needs to be changed, consult the owner’s manual and your usual technician.
Need Help?
Our service team would be delighted to assist you. Our entire staff of experts is Toyota-certified and adept in resolving even the most challenging problems with your Toyota. Make an appointment right away!
What happens after I change the oil in my car?
Reset Oil Change Indicator
- Turn on the ignition.
- Both the stop and accelerator pedals should be fully depressed.
- Maintain firm pressure on the brake and accelerator pedals.
- A notice verifying the reset process is ongoing appears after three seconds.
How can you turn a Toyota’s dash light back on?
Turn your key to position two after pressing and holding the trip meter reset button on the dashboard. Hold the odometer button down for a further ten seconds. The light should then begin to flash and potentially beep before turning off. Start the vehicle after releasing the odometer button.
My maintenance is necessary light is on, why?
The mileage is the only factor that activates the maintenance required light, also known as the service required light. When this light turns on, different automakers have varying standards. For instance, the maintenance needed light on a car might turn on once every 10,000 lights and stay lit until it is manually turned off.
The oil change, spark plug replacement, new tire, etc. are just a few examples of the routine maintenance that should be performed on a vehicle.
When servicing your vehicle, mechanics typically reset the maintenance required light. The process for resetting the maintenance required light differs based on the make and type of the car, yet, if they don’t, you can do it yourself.