Find the “trip” button on the right side of the steering wheel in the 2010 Toyota Prius to reset the oil maintenance light. Press it down until “trip A” flashes in the driver information center. “Off” the engine’s power switch by pressing it. Press and hold the “km/mph” button on the driver’s dashboard while you turn the car on. After displaying “re-settings complete,” the DIC will start to recalibrate the oil life. Schedule full synthetic oil and filter changes for your Prius every year or 10,000 miles. To ensure viscosity criteria, use lubricants bearing the Toyota brand or a 0W-20 substitute. In cooler months, thinner oils better coat engine components, minimize friction, and increase fuel efficiency. The typical cost of supplies and labor for a Prius lubrication service is between $115 and $130.
2010 Toyota Prius owners must switch the ignition on, press the trip button, and then turn the ignition off to restart the oil light. Push the km/mph button while holding the brake pedal depressed. Then, press the start button. Hold the km/mph button down until the onboard display indicates that the reset is complete.
By pressing the start button without hitting the brake and holding the mph km / h button, you can turn the ignition “off” to reset the oil light. Hold down the mph, km/h button throughout the reset process until it is finished.
Set trip A on the trip meter while the engine is running. Turn off the system now. Now, turn on the system as usual while touching the brake while maintaining pressure on the MPH button. Display will appear indicating that the meter is being reset. Done. Push the MPH button.
In This Article...
How is the oil change light reset?
Reset Oil Change Indicator
- Turn on the ignition.
- Both the stop and accelerator pedals should be fully depressed.
- Maintain firm pressure on the brake and accelerator pedals.
- A notice verifying the reset process is ongoing appears after three seconds.
How can you turn a Toyota’s maintenance needed light back on?
In order to start the car, turn the ignition to position one after inserting your key. Turn your key to position two after pressing and holding the trip meter reset button on the dashboard. Hold the odometer button down for a further ten seconds. The light should then begin to flash and potentially beep before turning off.
Why does my maintenance light come on after I change the oil?
- Press and hold the ODO reset / readout button while the engine is off.
- Release the ODO button once it starts to show zeros, then flip the key back to the “off” position.
- If the car is on, turn it off.
- Turn the key in the ignition while maintaining pressure on the ODO button. till the dash lights turn on. Avoid starting the car.
- The ODO display will briefly flash before beginning to display only zeros.
- Verify that the odometer’s (ODO) total mileage displaytypically the ‘A’ displayis on.
- Now the light will read “MAINT REQD.”
What ‘MAINT REQD’ Means
Within 5000 miles of the last reset, the “MAINT REQD” indicator illuminates. It is merely a mileage counter meant to serve as a reminder to the user that an oil change is required and in no way indicates any system failure. If a specialist has always performed maintenance on your Toyota, they reset it after each oil change. It should be noted that the recommended oil change interval is not always 5000 miles. To find out how frequently the oil in your Camry needs to be changed, consult the owner’s manual and your usual technician.
Need Help?
Our service team would be delighted to assist you. Our entire staff of experts is Toyota-certified and adept in resolving even the most challenging problems with your Toyota. Make an appointment right away!
Tools Needed:
The engine oil funnel is now ready to be installed where your oil cap screws on.
Check the dipstick after adding this amount of oil to see whether you are close to the recommended level. When in doubt, it is preferable to add oil gradually and check frequently as opposed to overfilling.
Remove the funnel once the dipstick’s reading is accurate. You can clean it by wiping it with a rag.
To build oil pressure and fill the oil filter, start your Prius and let it run for a little while. When the dipstick reaches the full mark, turn off your engine and fill off the oil.
Why does the maintenance light not go out?
How do I turn the “Maint Reqd” light back on?
- Switch the ignition to the ON position.
- Set the trip display to TRIP A mode on the odometer.
- Activate the OFF position on the ignition switch.
- Turn the ignition switch to the ON position while pressing and holding the Trip Meter RESET button.
- It will do so via the service maintenance reminder light.
Can a Prius be operated while in maintenance mode?
The most efficient way to operate any car, whether it is a hybrid, electric, or gas-powered, is to drive more slowly. If you have a choice between several driving routes, pick the one with the fewest stops, the longest stretches, and a 45 mph speed restriction or less. When you approach the speed limit, release your foot from the gas or accelerator pedal and let the vehicle continue on with the least amount of acceleration.
WHICH MODE, PROCESS, SETTING, OR SYSTEM IS BEST FOR DRIVING A TOYOTA PRIUS OR HYBRID?
Today’s cars often have features that let the driver alter how the car behaves in various conditions. When attempting to increase fuel efficiency, the Eco mode is recommended. The accelerator, auto chips, and the onboard computer system all play a role in this. Torque will be produced by the system more gently than usual.
Through auto chips and relays, the driver can modify the vehicle’s engine and onboard computer system in eco mode to better regulate the vehicle’s acceleration. Through acceleration, this makes the car more fuel-efficient and provides a highly smooth ride. We are unaware of any car mechanics who believe that continuously using Eco Mode is harmful.
This question’s response depends on a wide range of variables. the Toyota Prius’s model year, the car’s condition, the road’s conditions, the weather, the vehicle’s speed, the car’s age and maintenance, and more. The answer is roughly 25 miles in ideal circumstances.
When neither the Eco Mode nor the Power Mode is selected, normal mode is in use. You may tell this by looking at the instrument cluster lights; the Eco or Power Mode light won’t be on.
We advise against using the maintenance mode while driving unless absolutely necessary. Be extremely cautious when using your vehicle in maintenance mode. Traction and other self-preservation and components will be disabled, and the vehicle will idling. Driving your Toyota Prius while it is in maintenance mode increases the risk of structural and inverter damage.
Why won’t the oil change light turn off?
If your oil light continues to illuminate even after changing the oil in your engine, you should examine the sensor to rule out a faulty sensor as the root of the problem. The oil pump might become clogged with dirt and other debris, leading the sensor to mistakenly report oil problems. Although changing the sensor is pretty straightforward, you should take your car to a qualified mechanic if you don’t feel confident doing it yourself. Low oil pressure is the following typical reason. Your oil light will turn on if the oil pressure drops below 5 pounds per square inch. You should check the oil level even though this shouldn’t happen after an oil change because you never know.
Even after an oil change, the final common cause of a lit oil light is perhaps the most troublesome. Numerous engine problems might result from the oil pump not circulating enough oil to maintain the engine’s parts lubricated and operating as intended. Parts do wear down over time, even though getting oil changes at regular intervals should prevent this issue from happening.
If it’s filled with oil, why is my oil light on?
Your dashboard will light up to resemble an old-fashioned oil can when your car alerts you to an oil issue. Get to a safe location and shut off the engine right away if the oil light turns on while you are driving. You need to stop driving your car because you might be out of oil. That might result in a breakdown, endangering you and other motorists. Driving while your oil lamp is on and pushing your luck might seriously harm your car’s engine.
If your oil lamp has illuminated, you should check the following:
- If the oil pressure is low, that could also turn on your oil light. Low oil pressure indicates that the pump isn’t moving enough oil through the system or that there isn’t enough oil for the pump to circulate. Because the oil is crucial to maintaining the lubrication of the surfaces, if the oil light illuminates and the pressure is low, pull over and shut off the engine.
- Check the oil level after you’ve parked your car in a secure location. The dipstick can be used for this. The dipstick should be removed, cleaned with a cloth, and then reinserted into the car. You can have a low oil issue if the dipstick is dry or has little to no oil on it. Do not restart the engine if this is the case.
Driving with low oil pressure or low oil levels might damage your car’s engine and eventually cause it to fail. When the oil light comes on while you are driving, stop right away and fix the issue. One danger signal that demands attention is this one!
We encourage you to call Wiygul Automotive Clinic at 1-866-702-8050 if you have any questions.
How soon after an oil change does the oil light turn off?
The oil light suddenly came on. You’re clueless as to why. And to make matters worse, you don’t really have a lot of time right now to worry about it.
How long can you drive with this object is in your face, you ponder. wonderful question We’ll respond to it and explain why it could have initially surfaced. Move along!
How Long Can You Drive With Oil Light On?
If the oil light comes on, you should try to get a repair to look at your car as soon as possible. However, keep in mind that a little more driving around won’t harm anything.
Typically, it takes about two weeks or 500 miles of driving before a flashing oil light becomes a serious issue. However, once that happens, things can quickly deteriorate and cause significant mechanical damage. Therefore, attempt to get your car serviced as soon as possible.
There’s Not Enough Oil in the Car
Numerous issues, including blown head gaskets and broken valves, can cause engines to leak oil. Whatever the case, if oil leaks from your car, it will begin to suffer and may eventually sustain catastrophic damage. As a result, the oil light will turn on when there isn’t enough oil in the vehicle.
The Vehicle’s Oil Pressure Is Low
A vehicle needs enough oil pressure to operate at peak performance. However, keep in mind that a number of things (such as an obstructed oil filter, a broken pressure gauge, insufficient engine oil, etc.) could cause the oil pressure to go too low. This will cause the oil light to come on.
The Oil Pressure Sensor is Malfunctioning
The malfunction of your oil pressure sensor may also cause your oil light to come on. Randomly, this happens, usually as a result of normal wear and tear. If the problem is not corrected, your car won’t have enough oil pressure, which will eventually cause more harm.
The Oil Pump Is Bad
A car’s oil pump may eventually fail as a result of wear and tear on the vehicle. The oil light will unquestionably respond to this. The only option at that point would be to replace the pump since if you don’t, your engine would experience increased friction and end its life much earlier than it should.
Is Your Oil Light Still On?
We have a group of expert vehicle repair specialists who will locate the cause of your check engine light before taking steps to fix it.