Replacing a Tail Light
- Step 1: Open the tailgate or trunk.
- Step 2: Remove the tail lamp assembly (if needed)
- Step 3: Remove the bulb.
- Step 4: Insert a replacement bulb after adding bulb grease.
- Step 5: Reattach the component (if needed)
- Repeat step 6 on the opposite side.
In This Article...
How is the tail light taken out of a Toyota Camry?
Remove the trunk liner cover in part to access the taillight assembly placed on the truck.
Remove the last fastener from the outside corner of the trunk, and the assembly should now be able to be removed.
Can the plastic on a tail light be replaced separately?
Hello, and thank you for your letter. The “lenses” or plastic coverings for the taillights are not offered for sale individually. If you wish to do that repair, you will have to buy the full taillight assembly. Now, keep in mind that you might be able to locate one used for a lot less money. In light of this, you should make sure any used parts are either inspected or are of “known good” quality. Junk yards, pull-and-pay shops (where you find and take the part on your own), and even online are common venues to find used units. Make an appointment at your home or place of business with our service department if you require help changing the taillight.
How challenging is a tail light component replacement?
Fortunately, changing the tail light bulbs isn’t hard and shouldn’t take you more than 45 minutes to an hour. Be careful that newer models could be a little trickier to disassemble than older ones because there will be more wires.
How much does a new tail light assembly cost?
Cost of replacing a tail light Expect to pay between $200 and $500 if you elect to have a professional replace your tail light assembly. If you own a high-end luxury or performance vehicle, the cost of the job may increase.
Why is my Toyota Camry’s brake light on?
Braking System Alert Light indicates that the brake system is broken or that the brake fluid level is low. Additionally, when the parking brake is not released, this light illuminates. If the parking brake is fully released and the light goes out, the system is in good working order.
How can I fix a broken tail light cover?
Craft glue might work if your tail light cover simply has a crack in it. However, if the damage is more significant, you should use some lens repair tape to cover the exposed region. This is available at most auto parts retailers, including this dealership.
Tail Light Assembly
The group of lights positioned on the back of your car is known as the tail light assembly. They are made up of the reverse lights, brake lights, and tail lights. Each set of lights has a specific function for nighttime conspicuity. The red tail lights are connected to switch on in conjunction with the activation of the front position lighting. When the driver applies the brakes, the brake lights turn on. On both sides of the car, these lights, which are a vivid red, are mounted in multiples of two.
In some vehicles, the brake lights and the tail lights can be merged. They can be placed as a dual-intensity bulb in these circumstances, with the brake-light having a brighter intensity. Fog lights are also used in cars to improve rear sight in heavily foggy conditions. When the driver shifts into reverse to back up the automobile, the reversing lamps turn on. For both your safety and the protection of other drivers, you must make sure the tail lights are in functioning order.
You should replace the tail light assembly if your tail lights have sustained external damage or if the lenses are dim. For every make and model of vehicle, Buy Auto Parts keeps a large selection of tail light assemblies in stock.
We offer excellent aftermarket components as well as original OEM replacements. All of our auto components are rigorously examined and backed by a warranty. Choose the correct year, make, and model of your car from our online catalog to view the components that fit it. You can purchase premium tail light assemblies at Buy Auto Parts for unbeatable pricing, plus free shipping. Contact us by email at [email protected] or over the phone at 1-888-907-7225 if you have any inquiries about our auto parts.
Can AutoZone repair damaged tail lights?
Shop online or visit your neighborhood AutoZone for nearby tail light lens repair. Having a practical fix for cracked, chipped, or damaged tail lights is crucial for both emergency situations and regular car maintenance in your garage.
Does the entire tail light need to be replaced?
If one of your taillights has failed, you should have it changed as quickly as you can in order to ensure your safety as well as to avoid getting stopped. Finding the precise bulb that has burned out is occasionally the most difficult aspect of replacement. Normally, there are three on each side. To be able to check all the bulbs, you’ll probably need to turn on your engine. Here are the following three actions:
- Turn off the engine as soon as you identify the offending bulb. See your owner’s handbook for details on how to remove the bulb. Vehicles come in a variety. You’ll see fasteners on some that allow access from the outside, while panels that require entry via the trunk must be removed. Some automobiles demand that you unplug the electrical cord and remove the entire taillight housing component.
- Some bulbs need to be gently twisted to the left while being pulled back. Others demand that you pull the bulb out of the base directly. Remember to refer to your manual once more.
- Clean up any corrosion with a rag or brush before replacing the bulb. As you push and turn to replace a “twisting bulb, ensure sure the tabs are aligned correctly.
In conclusion, it’s not always as simple as it first seems to change a bulb in your taillight. Bring your automobile to Lake Arbor Auto if you run into problems! Our professionals can discuss with you the unique characteristics of some bulbs and other finer points of this frequent issue.
O’Reilly modifies the tail lights?
While you wait, at no cost to you, our parts specialists can swiftly and easily change wiper blades because they are experts at changing headlamp and taillight bulbs.
When my taillight breaks, can I still drive?
Don’t be shocked if you are pulled over if your taillight is damaged. A broken taillight is one of the safety offenses that police are constantly looking out for. It makes it more difficult for people to see you, and if the second one burns out as well, it will be quite difficult for approaching drivers to see you at night from the back. However, you won’t necessarily receive a penalty just because you’re stopped for a faulty taillight. Although it is technically against the law to drive with a broken taillight, most police officers would likely only issue you a warning and instruct you to have it replaced as soon as possible. However, some police officers do issue citations for damaged taillights.
Are the brake light and the tail light interchangeable?
Many automobiles have a single globe that houses both the braking and tail lights. In other words, both lights have the same external covering. Your car’s may be a little different, with individual globes. In contrast to brake lights, which turn on instantly when you hit the brakes, tail lights are activated by turning on your headlights or applying the parking brake. The brake lights are a brighter red than the tail lights, which are typically red on cars. White back-up lights are also included in your rear lights.
Defective Fuse
A fuse box is probably found under the hood of your car or on the front passenger side of the cabin. Electrical components all throughout your car are controlled by fuses.
You can check the fuse box to determine if it is the source of the issue if your tail light has stopped working. The location of your fuse box and tail light fuse are both described in your car’s owner’s manual.
You can check the condition of your tail light fuse using a fuse tester. Replace the fuse with a new one of the same amperage if it does not illuminate.
Bulb Burns Out
The extended use of a tail light bulb might cause it to burn out. Remove the tail light cover and examine the bulb to see whether this is the situation.
The filament of the tail light bulb can be seen to check for defects. You’ll have to buy a new bulb if the filament is broken.
Socket No Longer Works
There may be instances where the sockets for the tail lights malfunction. This might happen as a result of moisture getting inside the socket and corroding it. It may also occur as a result of a faulty wire connection between the socket and the lightbulb.
Look for any fading or damage to determine the condition of a socket. Replace the socket if it is blue, brown, or white, or if the pins are damaged or broken.
A multimeter can be used to measure the electrical current flowing through a socket. You can tell if electricity is getting to the socket’s pins by using a multimeter.
Finding the cause of a broken tail light can be difficult and irritating. Bring your automobile to a qualified auto mechanic if you are unclear of the source of a defective tail light. In this manner, you can have your vehicle inspected, figure out what’s wrong, and have your broken tail light fixed or replaced.