How To Replace Rear Wiper Blade On Toyota Highlander

Off the window, lift the wiper arm. You might need to take off the cover on some cars so you can access the area where the wiper arm attaches to the back window. Rotate the wiper blade squarely toward you while holding the wiper arm firmly in one hand.

On a 2014 Toyota Highlander, how do you swap out the rear wiper blades?

  • Get rid of the old blade. Off the window, lift the wiper arm.
  • Take away the wiper. The wiper will gently click free from the wiper arm once it has been turned.
  • Put the replacement blade in place. Put the replacement wiper blade’s little bar attachment into the wiper arm’s hook.
  • The blade should be secured.
  • Done!

How are wiper blades changed on a 2015 Toyota Highlander?

When your Toyota Highlander’s wipers are halfway down your windshield, switch them ON before turning them off.

Lift your wipers up from the windshield

It should be simple to lift your wipers up and away from your windshield once they are stopped halfway on your windshield. The old wipers on your windshield should protrude and point away from you. Now providing for simple access throughout the remaining modifying procedure.

Before you remove old wiper blades

Make sure to note which side the new blade length belongs on. Measure the previous blades’ length or simply compare it to the new Trico wiper blades. Then, position the fresh blades on the appropriate side.

Remove old wiper blades

The windshield wipers on your 2015 Toyota Highlander connect to a little hook connector on the vehicle. The little hook’s attachments come in a variety of styles depending on the wiper maker. In order to raise and slide off the old wiper blade, look for a button or a latch.

Which size wipers will fit a 2016 Toyota Highlander?

The wiper blade sizes for the 2016 Toyota Highlander are 26″ on the driver’s side, 20″ on the passenger’s side, and 12″ on the back.

How do I choose the right windshield wipers?

Every car has a size of wiper blade that is recommended by the manufacturer for that particular make, model, and year. It’s crucial to get a new blade that is the right size for your specific vehicle. Finding the appropriate wiper size for your car can be done in a few different ways:

The two blades may be different sizes on some cars, so it’s important to install the right size on both the driver’s and passenger’s side.

Why Size Matters

If you install wiper blades on your car that are longer than what is advised, the wipers may collide and harm the wiper motor or the blades themselves. Additionally, a blade that is too large could not adequately fit the window’s design, leading to visibility loss and uncleared areas. Or the windshield trim may be struck by the blade.

Loss of visibility results from blades that are too narrow for the car to clear the entire windscreen. Always use wiper blades that are the proper size for your vehicle’s make, model, and year.

How much does a windshield for a Toyota Highlander cost?

Oh no, hitting a deer can cause injuries to your car as well as you. For a Toyota Highlander windshield replacement, budget anywhere from $200 for a model year 2004 up to $1,300 for a 2021 model.

You might be curious as to why there is such a large pricing disparity. It all boils down to the technology found in modern automobiles. Many automobiles now have sensors and cameras built into the windshields, but they also need to be calibrated after the replacement of the windshield.

After paying your deductible, if you have comprehensive auto insurance, you will be protected if you strike a deer. You will be responsible for covering the replacement costs if you don’t have comprehensive insurance.

Here’s to getting your windshield replaced as soon as possible and getting your Highlander running again!

Unfortunately, many owners of cars and SUVs cut their insurance coverage to save money, but you don’t have to do that to lower your premiums. The Jerry app will look through more than 50 major insurers to get you an affordable, personalized coverage!