A CR2032 battery, which only costs about $5.00, should be your first purchase if you want to replace the Toyota Highlander key battery. Once you have a replacement battery, proceed as follows:
- Test the key in Step 5! If it still doesn’t work, try again after moving the batteries. If it still doesn’t work, the issue might not be with the battery.
- Step 2: Remove the circuit board by loosening the clips keeping it in place.
- Step 1: Using a flathead screwdriver or similar tool, pry open the rear cover and take out the remote control.
- Step 4: Replace the outdated battery with the fresh one and put the keyfob back together.
- 3. Carefully raise the circuit board to expose the outdated battery.
Spend a little extra time with Jerry to reduce your auto insurance costs if you’re already investing time in your vehicle. The Jerry app, a certified broker, can assist you in finding and comparing quotes from more than 50 leading companies, including Progressive and Travelers, without cost. Jerry can assist you in purchasing the coverage you require and even in canceling your current policy if you find it at a lower price.
In This Article...
What kind of battery powers a key fob for a Toyota Highlander?
A CR2032 battery, which you can get in shops and online, is used by the majority of Toyota models. These batteries are really inexpensive, usually costing less than $5. Replace the battery in your Toyota key fob within the casing, then cap it off.
How long does the battery in a Toyota key fob last?
When your Toyota key fob’s battery is running lowthe typical battery life is one to two yearsan alert will sound when the engine is turned off.
How can I program the key fob for my 2018 Toyota Highlander?
How to Set Up a Toyota Car Remote
- Within five seconds, turn your ignition key from “off” to “on” again.
- Close and reopen the driver door twice in the following 40 seconds. Then, put the key in and take it out of the ignition once again.
- Once more, make sure you finish steps 1 and 2 within 40 seconds.
The battery in my Toyota key fob has to be changed.
How to Replace the Battery in a Toyota Key Fob.
- Take the key out of the fob. Over the key portion of your key fob is a tiny metal button.
- Unlock the fob.
- Dispense with the green circuit board.
- Switch out the battery.
- Place the key inside the fob after putting the fob back together.
What happens if the battery in my key fob dies while I’m driving?
This issue has been foreseen by automakers ever since the key fob was created. Nothing will happen if your key fob dies while you’re driving. Simply because the key fob is a locking and starting device only, the automobile will continue to run. The key fob has no influence over the ignition or engine once the automobile is moving.
Even though you’ll need to go to a general store or pharmacy to get the battery, replacing the battery in your key fob simply takes a few minutes if you’re pressed for time.
Why not take the time to renew your auto insurance at the same time as you’re replacing the batteries in your key fob?
You can access a new quotation with just a few taps on your phone screen by downloading the Jerry app and answering a few questions.
Jerry assists you in finding and comparing rates from more than 50 leading suppliers in minutes as a licensed broker. Jerry can assist you with purchasing new insurance and even canceling your existing policy when you find a lower rate.
If I change the battery, do I need to reprogram my key fob?
A remote key fob needs to be associated with your vehicle particularly in order to be secure.
This stops people who drive the same make and model of automobile as you from using their remote to access your car. You’ll need to reprogram the fob if changing the batteries has erased this connection or if it was somehow disrupted in order for it to once again recognize your automobile.
Standard programming sequence
Your key fob can typically be reconfigured by following this typical procedure:
Instead of starting and then returning to the locked position, turn the key into the run position. Repeat this multiple times.
You’ll typically hear a chime or other sound when you’ve cycled the key enough times. At that point, you can push the lock or unlock button on your key fob to hear another chime.
Can a dead key fob battery still start a car?
- Use the mechanical key to unlock the door after you get it. If your door doesn’t have a key slot, it’s likely concealed beneath the handle cover. To access the key slot, carefully remove the handle cover by using the key.
- On your key fob’s back, search for a little sliding button. You can slide the key fob cover off or click a button to do so. To get it to release, you might need to use your fingernail and a little force.
Now that you’re inside, here’s how to start the car with a dead key fob:
- Check the steering column for a physical key slot if neither of these approaches succeeds (some Mazda models have this feature). To start the car, place the mechanical key within the keyhole.
- Press the START button with the key fob. Instead than pressing the button with your finger as usual, push the key fob against it. Many manufacturers utilize this backup device to make sure the car can start even if the key fob is dead.
- Some vehicles have a secret key fob slot that can be used to start the engine. For instance, the backup slot is located inside the cup holder in some Ford models. Your fob will fit perfectly in the slot. Use the push button start as usual after inserting the dead key fob into the holder.
- Close the key fob after inserting the mechanical key once more.
How can a key fob with a push-button start be programmed?
You may be able to program a keyless ignition fob for vehicles with a push-button starter in some circumstances. Even though it’s far from foolproof, it’s worth a shot before paying a dealer to program it for you.
- When you’re ready, quickly hit the start button on your car 15 times, with no more than two seconds passing between each try. Remember, you’re not actually trying to start the engine while doing this, so keep your foot off the brake.
- Get into the driver’s seat and close the door behind you while holding the key fob in your hand. Prepare to place one hand on the key fob and the other on the start button of the car. You’ll need to work rapidly, just like the processes mentioned before, so get ready for that.
- Press the lock button on your fob after the fifteenth button press. The car doors will lock and the fob will be fully functional if the pairing process was completed. If the attempt failed, it could be worthwhile to try it again to determine if there was a mistake in the first attempt. The timing of this strategy can be a little tricky and challenging to master the first time.
How do I find out which battery my key fob uses?
Open your fob to find the battery your automobile key fob uses. There will probably be an engraving that starts with CR followed by a string of digits if the item contains a battery. Check your owner’s manual or search online for your car’s make, model, and year without a battery or engraving.
Will changing the battery on my key fob make it work again?
A dead battery is the most frequent cause of a key fob not functioning. Having said that, your keyfob might be having more serious issues. A key fob replacement or even automobile door lock repair may be necessary if it stops operating after a battery change.
How do I know if changing my key fob battery will fix my car key?
When the key does not function under any conditions, it is likely that the car key fob has a dead battery. On all door locks, all buttons have the same lack of effectiveness. When buttons are pressed, no lights illuminate, suggesting that no signal was transmitted. The backup fob, however, functions flawlessly.
What do I do if my key fob is not working after a battery change?
Before you replace the automobile remotes if your key fob still won’t work after a battery change, make sure your locks are operating properly. Additionally, make sure you didn’t unintentionally deprogram your keychain.
Can you fix a key fob not working after a battery change?
Although replacing the remote’s batteries might be the quickest repair for the problem, this is by no means your only option. Check to see if the key fob or the vehicle is the root of your issue. After determining the root cause, correct or change the damaged components.
Can I set up a key fob on my own?
Many automakers have started designing vehicles with locks that can be unlocked with little more than a key fob since the development of remote technology. The owner of a key fob can easily unlock a door by pressing a button, and many of them can also start their car by pressing a button as long as the fob is inside.
Unfortunately, if a car owner misplaces his or her key fob, or wishes to make an extra copy, the dealership may claim that they have proprietary rights over the device, and, as such, only they may make a copy and program it, which comes with an outrageous charge. However, while making a new key fob and programming it to function with your automobile may require expert guidance, a knowledgeable locksmith may help you with this task without forcing you to go back to the dealership for assistance.
Wait, is it illegal to create a new key fob without the dealer’s consent?
Some dealers can even claim that if the task is not carried out by a licensed operator, making a new key fob is illegal. However, even if this might be the case with a leased or rented car, you are probably allowed to create as many copies as you want with the assistance of a professional.
Additionally, programming a key fob to work with your car is also not a difficult process. While you shouldn’t attempt to manufacture a copy yourself, a skilled locksmith can provide you with a new key fob quickly.
How can I tell if the battery in my Toyota key fob is dying?
Many key fobs have a tiny LED light that turns on when one of the buttons on the fob is pressed. If the LED light is completely dark, either the fob’s battery is dead or the fob is experiencing some other issue. You can use a voltmeter to check the voltage of the fob battery if you already have it out.
Can a key be used to start the Highlander?
The majority of cars have workarounds that make key fobs less of a need and more of a luxury. Despite their seeming necessity. To start your Toyota Highlander, you can actually utilize the metal key that is housed inside the key fob.
To start your Toyota Highlander with a dead key, adhere to these steps:
- Once seated, depress the brake and push the start button while keeping your key fob as close to the push-start button as you can.
- To release the metal key, first press the button on the bottom of your key fob. After that, remove it from the fob.
- Use the metal key to unlock the door on the driver’s side.
It’s uncommon for the key fob to fully die because they don’t require much power. Because of this, using these methods should typically enable you to start your vehicle without a completely functional key fob.
But keep in mind that your battery can be on the verge of dying completely. Change the battery as soon as you can to prevent any major issues down the road.
Take an extra second to save on vehicle insurance with Jerry while you’re already learning more about your key fob. The Jerry app, a certified broker, assists users in saving $879 annually on auto insurance on average.
Simply download the app, respond to a few questions, and Jerry will compare prices from more than 50 leading companies, including Progressive and Allstate, and send the best offers directly to your phone for no cost.