How to change the battery in the Toyota RAV4 “Triangular Fixed key fob” (2006, 2007, 2008, 2009, 2010, 2011, 2012) For a step-by-step demonstration on how to replace the battery in your key fob, see the video below. You will require a single CR2016 battery.
In This Article...
The battery in my Toyota key fob has to be changed.
How to Replace the Battery in a Toyota Key Fob.
- Take the key out of the fob. Over the key portion of your key fob is a tiny metal button.
- Unlock the fob.
- Dispense with the green circuit board.
- Switch out the battery.
- Place the key inside the fob after putting the fob back together.
How long does the battery in a Toyota key fob last?
When your Toyota key fob’s battery is running lowthe typical battery life is one to two yearsan alert will sound when the engine is turned off.
How much power does my Toyota key fob require?
A CR2032 battery, which you can get in shops and online, is used by the majority of Toyota models. These batteries are really inexpensive, usually costing less than $5. Replace the battery in your Toyota key fob within the casing, then cap it off.
Do you need to reconfigure your key fob after changing the battery?
A remote key fob needs to be paired with your vehicle specifically in order to be secure.
This stops people who drive the same make and model of automobile as you from using their remote to access your car. You’ll need to reprogram the fob if changing the batteries has erased this connection or if it was somehow disrupted in order for it to once again recognize your automobile.
Standard programming sequence
Your key fob can typically be reconfigured by following this typical procedure:
Instead of starting and then returning to the locked position, turn the key into the run position. Repeat this multiple times.
You’ll typically hear a chime or other sound when you’ve cycled the key enough times. At that point, you can push the lock or unlock button on your key fob to hear another chime.
What is the price of a key fob battery?
These batteries typically cost $10 or less, however some fobs need two. Since it just takes a few seconds, battery specialist shops and dealers frequently change the battery without charge.
What is the price of a new Toyota key fob?
A new Toyota key fob might cost anywhere between $200 and $350. This is because a complete key fob replacement requires the cutting of a new key and the programming of the electronics to your car.
How is a 2007 Toyota Rav4 key fob programmed?
2. UNLOCK and OPEN the driver-side door. CLOSE the trunk and all other doors.
3. Put the key in the ignition and pull it out twice in the space of five seconds.
4. DOUBLE-CLOSE and DOUBLE-OPEN the driver-side door.
5. Turn the key in the ignition, then take it out.
6. DOUBLE-CLOSE and DOUBLE-OPEN the driver-side door.
7. Place the key in the ignition and keep it there.
8. SLIP the driver-side door shut.
9. Start the ignition and then turn it off.
10. REMOVE the ignition key.
11. The door locks will now cycle to show that the car has entered programming mode successfully.
12. When programming the first remote, PUSH and HOLD the LOCK and UNLOCK buttons for 1.5 seconds. As soon as you release, push and hold the lock button for two seconds.
13. To verify that the remote was successfully programmed, the door locks will cycle. Repeat steps 12 and 13 if you need to program any additional remotes. If not, move on to step 14.
14. OPEN the door on the driver’s side. The programming is now over.
Want a professional to configure the remote for you since you’re having problems doing it yourself? Find a qualified key fob installer in your neighborhood by typing your city or zip code in the search box below.
Was this Knowledgeable? Please spare a second to Like, Follow, and Share on the social networks listed below. People like you aid in getting the word out about us. It is extremely beneficial! We appreciate you coming and spreading the word to your loved ones.