How To Replace Ac Compressor Toyota Sienna

  • Remove the 10-mm nuts holding the high- and low-pressure AC compressor connectors to the compressor by pinching off the electrical fitting from the AC compressor.
  • Remove the connectors for the compressor’s high- and low-pressure lines. Don’t let any debris get inside these connectors.
  • The four (4) AC compressor mounting bolts should be loosened and removed.
  • The bolt holding the AC bracket against the left side of the AC compressor should be removed.
  • Get rid of the AC compressor.
  • Clean up any corrosion on the AC mounting bolts, if necessary, and apply anti-seize to the threads of the bolts.

Can I change the AC compressor on my own?

No matter what brand your air conditioner is, or how carefully you maintain it, the compressor will ultimately need to be changed. You can replace your air conditioner’s compressor by following the instructions below if you have determined that the problem is with the compressor. Refrigerant gas is compressed by a compressor before being sent to a condenser, where it is cooled and transformed into a liquid.

By submerging the coil in water or using a fan, the gas can be cooled. Normally, a professional should replace a compressor, but if you are skilled with your hands, you can do it yourself at home. Additionally, you can save a sizable sum of money by doing the work yourself.

The compressor will require the replacement of the following parts:

  • updated compressor
  • basic hand tools including pliers, ratchets, screwdrivers, and wrenches
  • Recovery tank for refrigerants
  • apparatus for system recovery and charging
  • Refrigerant
  • Torch

Replacing Compressor

Determine type: Since there are many different types of compressors, it’s crucial to know the right one before starting this job. The device or the outdated compressor will have the right part number and type. Turn off the power before doing any maintenance work on the system. This will help to avoid major harm or even death.

Usually, the power switch and circuit breakers are close to the appliance. Your primary breaker panel might also have breakers.

Delete the refrigerant

In order to relieve the pressure that an air conditioning system is always under, all of the refrigerants must be removed. Remember that in most situations, in order to remove or install refrigerant, you must be certified.

The recovered refrigerant must be kept in a tank that has been certified and not let loose into the atmosphere.

Draw lines.

Cut the compressor’s refrigerant lines, then unplug the electrical connector.

Bolt in the new compressor and attach the electrical connector to complete the compressor installation. Additionally, the compressor must be brazed to the refrigerant lines.

AssembleAssemble the condenser unit and add the recovered refrigerant to the system.

How durable are Toyota AC compressors?

Have you ever been dismayed to discover that, on a scorching summer day, your air conditioner isn’t chilling the room enough? Even the best of us experience it. Thankfully, we are fully aware of how to resolve the signs of a damaged air conditioning compressor.

One of the most important signs that something is wrong with your car’s air conditioning system is inadequate cooling, among other things. Although you find it bothersome and frustrating, fortunately, a Natrad professional can assist you in solving the issue.

Your air conditioning system has a lot of parts, so if you want to know how to identify the troublemaker, keep reading.

The greatest network of cooling experts in Australia includes Natrad workshops. Natrad can effectively assist you in identifying problems with A/C compressors because to its extensive experience in the cooling and air conditioning business.

Symptoms of a failing A/C compressor

Let’s examine the indications of failed car air conditioning compressors that brought you here.

The lifespan of a car’s compressor is typically 12 to 15 years, depending on how well the car is maintained. Having said that, it’s crucial to frequently service and inspect your vehicle in order to avoid an early failure.

Some indicators that something is failing include:

  • Leaks
  • eerie noises
  • chilly air
  • ECU mistake
  • seized compressor belt or clutch

Later, we’ll discuss what these signs might mean, but for now, let’s define and explain what a compressor is.

What is this thing?

The air conditioning system in your automobile wouldn’t work without a compressor, which is a crucial part of the system.

Due to the fact that it is connected to the crankshaft via a drive belt, it is also the only moving component of the A/C system. In contrast to other parts of the air conditioning system, it gets its power straight from the engine.

Given this circumstance, it’s crucial to regularly check on the compressor as it may be more susceptible to wear and tear.

What does a compressor do?

The compressor is a component of the high pressure side of the air conditioning system, which transfers refrigerant gas through the condenser and changes it from a gas to a liquid.

The refrigerant gas is compressed by the compressor, which causes it to become extremely hot. This is then transferred to the condenser, which cools the gas, turns it into liquid, and circulates it to the expansion valve and receiver dryer.

Once inside the evaporator, it is exposed to the heated cabin air and transforms back into gas. It “evaporates,” as the name implies, and as a result, gets exceedingly chilly. As directed by the blower fan, this cold is transferred through the evaporator’s metal tubes and fins to bring cool, dry air into the cabin.

The compressor is a crucial component of this procedure, as you can probably guess by this point.

Key indicators of compressor failure

We previously described a few typical compressor failure symptoms, but what do they actually signify and how do they occur?

Leaks indicate that refrigerant will eventually escape from the system at some point. Typically, compressor leaks occur at the shaft seal, hoses, O-rings, and gaskets. They can be challenging to identify and may need to be found with the use of a specialized UV dye or electronic leak detector. To keep things oiled, the refrigerant also contains an oil mist that circulates. The air conditioning cycle won’t run if there isn’t enough refrigerant, which might harm more than just the compressor.

There could be a few causes of strange noises. Either the compressor’s internal components have failed, which could produce some unpleasant noises, or something has seized. This is most likely the compressor clutch or belt pulley.

The compressor is unable to circulate enough refrigerant to maintain the system functioning properly, which is either due to a shortage of refrigerant or a failing component.

ECU mistake

A check engine light on your dashboard is a clear indication that something more nefarious is there. The ECU monitors voltage signals going to components like the compressor and can identify signals that aren’t working properly and could supply voltage incorrectly.

Typical reasons for failure include:

  • Corrosion
  • components of the compressor losing lubrication (leading to internal part breakage)

How can I tell if my air conditioning compressor is blown?

Problems with the air conditioner’s compressor are frequently obvious. If there’s an issue with your compressor, you can experience one or more of these signs:

Your AC Is Making Growling, Screeching, or Clattering Noises

Your air conditioner will create strange clunking or rattling noises if the compressor has electrical issues. If the condenser unit is vibrating, it is another warning flag. Don’t leave it running in the hopes that the noises would stop on their own. Your air conditioner may sustain further damage as a result of your actions.

You Have a Hard Time Getting Your AC to Start

Before assuming there is a problem with the compressor, make sure nothing has tripped the breakers. To accomplish this, take the following actions:

Step 1: Find the electrical service panel, which is typically in a closet, corridor, garage, or kitchen.

Step 2: Each switch should have a label indicating which appliances or areas of the house it activates when you open it.

3. There are three possible settings for the switch: “on,” “off,” or in between. Turn it to “off then back to “on if it is exactly in the middle.

Next, make sure the fuse box isn’t the problem to rule out a blown fuse. This box can be found on a wall outside your house, next to the condenser. The steps listed below can help you determine whether you need to replace a fuse:

How much does replacing an AC compressor cost?

Any air conditioning system must have a compressor, often known as a heat pump. It is crucial to maintain the system in top shape to ensure proper cooling. Through the system, the refrigerant gas is compressed to produce cooling.

A compressor unit typically lasts between 10 and 20 years. You should repair your compressor if it is worn out or broken. The price would fall between $800 and $2,800.

Cost Of Replacement Of Home AC Compressor

A residential AC compressor typically costs roughly $1,200. It would cost between $800 and $2,800 to replace. The final bill is made up of roughly 50% labor and material. The parts range in price from $450 to $1,500. Additionally, the price of labor per hour ranges from $50 to $150.

The duration of warranties, which cover parts for one or two years beyond the date of purchase, ranges from five to twelve years.

When calculating the price of a replacement compressor, the following criteria are taken into account:

  • It costs extra time and money to fix the outdoor unit. You can see a price difference of $150 to $250 because different brands may charge you in different ways.
  • Regional price is the next variable that may affect the replacement cost. The cost of petrol, shop space, and insurance must be more for the contractor if you search for a good area. As a result, he might bill you more than other contractors who don’t have these expenses.
  • The region affects both labor costs and unit prices. You could have to pay more if you live in a big city.

Residential Air Conditioner Compressor Cost by Size

There are numerous sizes for compressor units. A large-sized (5-ton) compressor can be twice as expensive as a small-sized one, which can run you roughly $800 to $1,000. This includes both the cost of the compressor unit and the labor necessary to replace it.

Repair Cost Of An AC Compressor

So, the price of repairing various compressor parts is shown here. It costs, on average, between $125 and $450. The cost of repair may be slightly more if you have an HVAC. It might cost anywhere from $150 to $550.

This is a typical cost breakdown for an emergency AC repair in MILL to fix an air conditioner’s compressor:

  • $170 to $650 for a circuit board
  • $250 to $600 for refrigerant lines
  • Finding and fixing refrigerant leaks
  • $230 to $1,600
  • Hard start kit: between $120 and $330
  • Capacitor replacement: $110 to $450
  • Compressor leads and lugs: between $70 and $250
  • Start capacitors: between $130 and $450

Repair Cost Of A Leakage In Residential AC Compressor

Even while finding a leak may only cost you $200, fixing it could cost you $1,600 or more. It makes sense to replace a r22 compressor system with a modern r240a compressor system.

Cost of Window vs. Central Air Mini-Split Compressor

12,000 British Thermal Units equal 1 ton of capacity. You would need approximately 25 BTUs per square foot. The price of the compressor for various models of air conditioners is shown below.

  • $350 to $1,700 for Central Air
  • Window Units $90 to $300
  • 4501,700 for a little split

Can you drive a car with a broken AC compressor?

Hi! Even when the a/c compressor has failed, it is probably safe to drive your car. There are a few things to keep in mind, though. Belt tension and the functionality of the other belt-driven accessories shouldn’t be impacted by the compressor pulley rotation as long as it is quiet, wobbly-free, and rotating smoothly. The “Defrost” setting will attempt to engage the compressor even if you leave the air conditioning switch in the “off” position.

Is replacing the automobile AC compressor worthwhile?

An AC compressor is not a maintenance item that needs to be changed out on a regular basis. Only if it malfunctions is the compressor need to be replaced. Although they can survive the whole life of the vehicle, a compressor typically lasts 1012 years and 150200K miles.

What causes failure of the AC compressor?

A critical phase of the refrigeration cycle is compression. The refrigerant is brought to a very cold state as a result, which cools the air. Some of the most frequent reasons for AC compressor failure include the following:

1. Unclean Coils

On the condenser coils, dirt, filth, and mineral deposits can accumulate. This reduces the efficiency of the air conditioner, which can lead to overheating and, ultimately, failure. It also prevents the air conditioner from removing waste heat from the system.

Refrigerant lines, which transmit refrigerant throughout the air conditioner via tubes, can become blocked. The output of the heating and cooling system may be reduced when they become clogged, which may later cause overheating and compressor failure.

Low Levels of Refrigerant

Leaks in the refrigerant lines are frequently the blame for low refrigerant levels. As you might have imagined, low refrigerant levels force the compressor to work harder merely to pump enough refrigerant through the air conditioner, which might cause compressor failure.

4. Improper Repair Techniques

One reason you should leave HVAC repairs to the professionals is that if they are done incorrectly, they can lead to problems like using the wrong replacement refrigerant. It’s also possible for a novice technician or do-it-yourselfer to overload or undercharge the compressor with refrigerant.

The Best Ways to Avoid Compressor Failure

The majority of the aforementioned causes of AC compressor failure can be avoided by following a routine maintenance program. In a perfect world, HVAC systems should undergo two annual inspectionsonce in the winter and once in the summer. A licensed HVAC technician should perform inspections. To avoid adding too much refrigerant, calculations must be exact when charging the system.

Correct cleaning techniques are also necessary for cleaning the compressor coils to protect the aluminum fins.

Why do automobile compressors fail?

The refrigeration circuit’s beating heart is the compressor. To transfer the refrigerant through the air conditioning system, it pumps and pressurizes it. Up to several hundred degrees and several hundred pounds per square inch of internal pressure, compressors operate hard and hot. They require very little lubricantjust a few ouncesto keep their parts moving. The compressor won’t last if there is a leak in the lubricant or if the lubricant degrades from contamination. The compressor will stop working eventually.

In addition to inadequate cooling, a seized compressor is the most typical sign of a compressor failure. When the magnetic clutch engages, it won’t turn, and the drive belt can screech in protest. Alternatively, the belt might already be broken or have fallen off its pulleys.

Loss of Lubrication Most Common Reason for Compressor Failure

Without a doubt, the most frequent reason for compressor failure is a loss of lubricant. This may occur if there is a systemic refrigerant leak that permits oil and refrigerant to escape. Hoses, hose and pipe couplings (O-rings and flange gaskets), the evaporator, condenser, or the compressor shaft seal are examples of common leak spots. To discover the leak and repair it, use a dye or an electronic leak detector.

Another factor that can deprive the compressor of oil is a restriction within the A/C system. Oil circulates with the refrigerant, thus if the expansion valve or orifice tube is clogged, the compressor could run out of oil and seize.

Though a compressor is leaking, creating too much noise, or not functioning properly, it may need to be replaced even if it is still rotating. Although certain compressors are naturally noisier than others, air in the system can occasionally generate loud knocking noises (the cure here is to vacuum purge the system to remove the unwanted air, then to recharge the system with refrigerant). Bearing and metallic noises are typically warning signs that the compressor is going to fail.

Compressor Worn Internally

If the compressor is internally leaking or not providing enough pressure as a result of defective reed valves, worn piston rings, worn or scored cylinders, etc., a new compressor can be required. Normal operating pressures with a full charge of refrigerant cannot be developed by a worn compressor or one with internal issues. An A/C gauge set can be used to diagnose this kind of issue.

Other Causes of Low or No Cooling

Do not replace the compressor until you have ruled out other possibilities, such as a low refrigerant charge, too much oil in the system, air contamination, a clogged condenser, plugged orifice tube, inoperative electric cooling fan, etc. Poor cooling can also be caused by a variety of other things besides a bad compressor.

Sensors in automobiles with autonomous temperature control systems might alter compressor function. Some have a compressor temperature sensor to turn off the compressor if it gets too hot; a compressor rpm sensor to monitor belt slippage; and an A/C pressure transducer (often put in the high side line) to monitor refrigerant pressure and cut off the compressor if pressure goes too high. To disengage the compressor in the event that the drive belt slips or the compressor seizes, Mitsubishi, for instance, uses a “belt lock controller.”

If the refrigerant temperature and pressure sensors do not indicate an increase when the compressor is being run, the A/C control module on Mercedes-Benz E-Class vehicles manufactured in 1996 and after will disconnect the compressor.


Make sure the magnetic clutch engages when powered up if the compressor is not turning. Here, a faulty clutch, relay, fuse, or wiring issue could be the underlying issue. Jumping the clutch lead with a jumper wire from the battery will reveal whether the issue is with the clutch or something else if the clutch fails to cycle on and off when the A/C is turned on. If the clutch engages, the clutch power supply is the issue (relay, fuse, wiring, switch or control module). To determine why the voltage is not passing, consult a wiring diagram and work your way back toward the battery.

When the system pressure (the refrigerant charge) is too low, a low-pressure cutout switch in many A/C systems prevents the compressor clutch from engaging. This is made to safeguard the compressor in the event of a leak. Therefore, if the clutch is not working, check the cutout switch and the refrigerant charge. For effective clutch operation, the air gap in the clutch is also crucial. The clutch could slip, burn, or not engage at all if the clearance is off. The specifications and adjusting instructions can be obtained in a service manual. In general, most clutches require a press fit clearance of between 0.015 and 0.040 inches.


How often do “manufacturing faults” cause compressors to fail? not frequently. Only two of the 75 defective compressors that were returned under warranty, according to one compressor maker, had manufacturing flaws. The remaining ones were unsuccessful due to issues including insufficient oil, air, pollutants, or “installer error.” The latter group includes utilizing cross-contaminated refrigerants, not using enough lubrication, using non-approved flushes to “clean” system components, and using the incorrect type of compressor lubricant. Repeat compressor failures were most frequently caused by debris from an earlier failure.

Use the Correct Compressor Oil

Always use the lubricant type that is suggested for a given compressor. This is crucial for scroll-type and rotary vane compressors in particular. Depending on the manufacturer, a replacement compressor may or may not come with oil. Before the compressor is fitted, the shipping oil may occasionally need to be emptied. In other instances, the compressor might have a POE or PAG oil lubricant that might or might not be appropriate for the vehicle. To prevent future warranty issues, strictly adhere to the installation instructions provided by the compressor supplier.

It is best to remove all of the old oil from a system before adding new oil. This will eliminate lubricant contamination and lower the possibility of overcharging the system with oil (which can cause cooling problems). For the application of your vehicle, always refer to the OEM oil capacity chart. A list of suggested lubricants for import R-134a compressors is provided below:

  • Rotary compressors by Behr/Bosch, model Ester 100;
  • PAG 46, Behr/Bosch piston compressors;
  • PAG 150 for the Calsonic V5;
  • PAG 46 for the Calsonic V6;
  • DKS, DKV, and DCW for Diesel/Kiki (Zexel) – PAG 46;
  • All Hitachi – PAG 46;
  • All Keihin – PAG 46;
  • Ester 100, all Matsushita;
  • PAG 100; Mitsubishi FX80;
  • PAG 46 for Mitsubishi FX105;
  • All Nihon – Ester 100;
  • PAG 46 Nippondenso 6P, 10P, 10PA, and 10P08E;
  • SP127, SP134, and 6E171 from Nippondenso – PAG 46;
  • PAG 125 for the Nippondenso TV series;
  • PAG 46 for Panasonic (all);
  • PAG 100 for Sanden SD500 and SD700;
  • SDB, TV, TRS, and Sanden SD710 – PAG 46; and
  • All of Seik-Seiki – Ester 100.