Safety Advice
Always use safety eyewear when performing maintenance on your car. When necessary, put on additional personal protective equipment (PPE), such as latex gloves or closed-toe shoes.
On the back of your car, find the tail light assembly. When you use your brakes or turn signal, they illuminate on each corner.
Remove any mounting screws that are present on the exterior of the tail light assembly, if necessary.
In This Article...
How much does it cost to change the Toyota Corolla’s tail light cover?
What do Toyota Corolla tail lights cost? Depending on the particular model year of your automobile, the price of a Toyota Corolla tail light may change. The price of OE replacement parts can range from $50 to $150.
Photo 2: Replace the assembly
Your young driver utilized the vehicle and then brought it back clean and full of gas. Isn’t it wonderful that he has grown into a mature adult? Oh, wait, you see the broken taillight, and he has “I’m not sure how it occurred. Is it time to stop by the body shop? No, you can complete this task with simple hand tools and the Internet.
A replacement taillight assembly is simple to locate. Just put “key in your preferred search engine. You’ll be astounded by the quantity of hits you receive. Most businesses sell inexpensive goods from abroad “counterfeit original equipment manufacturer (OEM) parts. If you don’t mind a “Make sure the seller lists it as a CAPA authorized aftermarket version. A CAPA-certified part is ensured to fit and function identically to the original. But don’t stop there with your quest. Numerous auto retailers have developed user-friendly websites where they provide OEM parts at steep discounts. (See “Dealer websites are listed below.) Before you purchase an aftermarket version, visit these dealer websites. In fact, we spent less on a genuine Honda taillight than we would have paid for an aftermarket one.
The two methods used by automakers to affix taillights to the body are different. Threaded studs inserted into the taillight are one technique. The sheet metal’s perforations are used to receive the studs, which are then tightened with nuts (Photo 1, top). See for the second approach “The below captive stud/socket technique
Once the taillight assembly has been unplugged, release the catch mechanism and twist to remove the lightbulb sockets. Since you already have everything apart, now is a good time to replace any bulbs that haven’t been changed in the last two years. After that, reassemble the new taillight after installing the sockets.
Can the tail light’s plastic cover be replaced?
Hello, and thank you for your letter. The “lenses” or plastic coverings for the taillights are not offered for sale individually. If you wish to do that repair, you will have to buy the full taillight assembly. Now, keep in mind that you might be able to locate one used for a lot less money. In light of this, you should make sure any used parts are either inspected or are of “known good” quality. Junk yards, pull-and-pay shops (where you find and take the part on your own), and even online are common venues to find used units. Make an appointment at your home or place of business with our service department if you require help changing the taillight.
Can I replace my own tail light?
Fortunately, changing the tail light bulbs isn’t hard and shouldn’t take you more than 45 minutes to an hour. Be careful that newer models could be a little trickier to disassemble than older ones because there will be more wires.
How can the brake light be changed on a 2018 Toyota Corolla?
Brake Light Replacement for a 2018 Toyota Corolla
- First step: Brake Light.
- To reach the bulbs, find them between the brake light and the rear turn signal bulb by pulling back the carpet.
- The old light should be pulled out of the socket by turning the brake light counterclockwise.
- Push the new bulb into the socket to replace the old one.
How is a taillight assembly changed?
Replacing a Tail Light
- Step 1: Open the tailgate or trunk.
- Step 2: Remove the tail lamp assembly (if needed)
- Step 3: Remove the bulb.
- Step 4: Insert a replacement bulb after adding bulb grease.
- Step 5: Reattach the component (if needed)
- Repeat step 6 on the opposite side.
Step One
Find out first how to get to the taillight bulb on your car. While you can access the taillight housing from the outside of some vehicles, you have to open the trunk on other cars and SUVs to get to the taillight bulb.
Consult your owner’s manual if you need help figuring out how to get to the taillight bulb.
Step Two
You can decide what equipment you’ll need now that you know how to get to the taillight bulb. Either a flathead or Phillips screwdriver will probably be required. To remove the screws keeping the taillight housing in place, gather the necessary equipment. You might not require tools if the taillight housing is accessible on your car. The cloth covering may easily be removed to reveal the bulb in its socket.
Step Three
Once the housing has been removed, decide which bulb or bulbs need to be replaced. Find the light bulb holder that contains the one you need to replace. Unscrew it by rotating it about a quarter turn and pulling it out to dislodge it.
Step Four
Pulling the bulb out of the socket slowly will allow you to remove it. The majority of them simply pull out, but others might need to be turned a quarter turn. There might be some additional screws to remove depending on how your car is set up. To avoid shattering the bulb, be gentle when doing this.
Step Five
Make sure the socket is clear of any dirt and debris before replacing the bulb. In the same way that you removed it, put the bulb back into the open socket. In order to prevent damage to the bulb, you might want to use gloves.
The procedure you used to remove the old bulb should be repeated. Reinstall the taillight housing by putting in any missing screws. If you had to remove any extra components to get to the taillight bulb, replace them.
Step Six
Find out more about high-quality lighting items, where to buy your car part, or how to locate it.
Only for entertainment and informational reasons, the information in this article should not be used as a substitute for consulting a qualified technician or mechanic for expert guidance. We advise you to speak with a licensed technician or mechanic if you have any specific queries or issues regarding any of the subjects discussed here. We will not, under any circumstances, be held responsible for any loss or harm resulting from your reliance on any content.
How much does a new tail light assembly cost?
Cost of replacing a tail light Expect to pay between $200 and $500 if you elect to have a professional replace your tail light assembly. If you own a high-end luxury or performance vehicle, the cost of the job may increase.
Can I drive if my tail light is broken?
Driving with a damaged tail light is illegal. Two functional tail lights are a requirement for all vehicles. All tail light lenses must also be transparent. Additionally, they must come from the original automaker and look to be in good shape.
Additionally, installing dark lenses or bulbs that reduce the efficiency of tail lights is prohibited. Additionally, you should only use tail lights with U.S. Department of Transportation-approved bulbs.