To its credit, Toyota includes a spare tire with the Toyota Highlander. However, keeping it up is simple to forget.
Maintaining spare tires positioned underneath a car can be challenging. In this example, we’ll use a first-generation Toyota Highlander to show you how to take out, care for, and replace a spare tire. For some other Toyota models and some other makes that tuck the spare up under the back of the car, the process is the same. This narrative serves as a how-to manual for getting the spare tire down if you get a flat and are in immediate need of one.
Opening the cargo compartment and looking under the cargo floor is the first step in finding the spare tire in a Toyota Highlander. You can lower the spare tire using the special tools that are there. Next, set a work mat down. This helps to guarantee the tire has a landing location and keeps you clean. The plastic cover should then be unscrewed when you crawl up underneath the car (never while using a jack).
Return to your standing position at this point, and lower the tire using the small nut with the ring on top. To accomplish this, insert the ring into the nut slot to the right of the cargo area and turn the black wrench tool in the other direction. The spare tire for the Toyota Highlander will gradually descend to the ground.
Crank it down and then some more. After that, remove the tire and position it against the rear bumper upright. If the line you crank-down has enough slack, you can slide the retaining ring through the hole in the centre of the cover and rim. If not, crank again.
In This Article...
How long can a spare tire for a Toyota be used?
You can drive to the closest repair facility with the spare tire in order to have the flat tire evaluated and either repaired or replaced. With a donut-shaped spare tire, you should not travel faster than 50 mph or farther than 50 miles.
How are tires replaced on a 2017 Toyota Highlander?
Your Highlander Already Has the Tools
- First, find a safe place and turn on the emergency lights.
- 2. Take off the hubcap.
- Step 3: Insert the Jack, loosen the lug nuts, and raise the Highlander.
- Remove the lug nuts in Step 4 and mount the spare.
- 5. Tighten the lug nuts, then lower them and tighten them once more.
A Toyota Highlander’s spare tire is nowhere to be found.
The spare tire for your Toyota Highlander is secured to the frame’s lower part behind the rear bumper. You’ll need a wrench and your key to remove it.
Say you’re driving your Toyota and enjoying the scenery. The air is suddenly pouring out of your front right tire as you unexpectedly roll over a rusty nail. You must first be aware of where and how to obtain your Highlanders spare tire before hastily searching online for information on how to change a flat tire.
A Toyota Highlander can a full-size spare fit underneath?
Question:
Will my 2019 Toyota Highlander still fit a full-size spare tire underneath it once I connect the etrailer Trailer Hitch Receiver – Custom Fit – Matte Black Finish – 2?
Expert Reaction:
After installing the etrailer Trailer Hitch Receiver # e98844, your 2019 Toyota Highlander’s full-size spare tire will still fit as long as it DOES NOT have an aluminum rim.
You will want a new trailer hitch receiver, the Draw-Tite Trailer Hitch Receiver # DT84MR, in order to keep your full-size spare beneath your Highlander if it does have an aluminum rim.
Both upgrades are compatible with hybrid vehicles, and I’ve included links to videos showing how to install each option on a 2019 Highlander below for your viewing pleasure.
I also wanted to highlight that the T-One Vehicle Wiring Harness # 118449 is the right part for your 2019 Highlander if you required to haul a trailer as well as trailer wiring.
Do 2019 Highlanders come with full-size spare tires?
On a 2019 Toyota Highlander, is the spare tire underneath the car or under the flooring of the back seats?
A 2019 Toyota Highlander’s spare tire is kept underneath the car. You can see the empty space under the car where the spare tire should be if you watch the installation video for the etrailer Trailer Hitch Receiver # e98844 that is linked to this article. The full-sized spare tire with the aluminum rim will need to be removed when a trailer hitch is installed, which is why it isn’t seen in the picture.
Installing a roof rack and using a roof basket to carry the spare tire is a very common solution if you want to still transport your full-size spare tire with the aluminum rim outside of your car. On cars like a Highlander, this is not only practical but also desirable in terms of appearance. If you’d like, I can offer some suggestions.
Please let me know how you intend to use the trailer hitch so that I may provide any additional advice that may be required.