- Put the ignition on with your key. Turn the key to the first position.
- On the dashboard, press the reset trip meter button. Hold it down for a few seconds.
- Hold the odometer button down for around five seconds.
- Release the odometer button after it is off.
In This Article...
How can you turn off the Toyota Rav 4’s maintenance is necessary light?
How to Reset the Toyota RAV4’s Maintenance Light
- In order to start the car, turn the ignition to position one after inserting your key.
- Turn your key to position two after pressing and holding the trip meter reset button on the dashboard.
- Hold the odometer button down for a further ten seconds.
How To Turn Off the Toyota Maintenance Required Light
The Toyota Maintenance Required Light can be easily reset, albeit the procedure may differ depending on the model year if it hasn’t already been done by your service specialist. Always refer to your Toyota owner’s manual for a detailed step-by-step procedure.
To navigate settings, use the left or right arrow on the steering wheel.
How do I stop the needed maintenance?
How do I turn the “Maint Reqd” light back on?
- Switch the ignition to the ON position.
- Set the trip display to TRIP A mode on the odometer.
- Activate the OFF position on the ignition switch.
- Turn the ignition switch to the ON position while pressing and holding the Trip Meter RESET button.
- It will do so via the service maintenance reminder light.
Why does my Rav4 indicate that maintenance is needed?
The significance of the emblem MAINT REQD is significant. The MAINT REQD light indicates when the vehicle’s scheduled maintenance is due when it illuminates. If your car is under two years old, this service can be covered by your ToyotaCare plan.