Follow these easy steps to remotely start your Toyota Tundra:
- Your Tundra’s key fob has a LOCK button. Press and hold it twice in quick succession.
- Then, on the key fob, press and hold the LOCK button for three seconds.
- The engine starts, and the turn signal lights flash repeatedly.
- The engine will operate remotely for ten minutes before automatically shutting off.
If you open any door on your Tundra while the engine is running after remote starting, the engine will shut off for safety reasons. To turn the ignition on and start your car, a working key must be present within the vehicle.
In This Article...
How is a Toyota 2020 remote started?
Press the lock button on your key fob three times to remotely start your Toyota. For the first two presses, make sure you push the lock button quickly, and for the third press, hold the button down for around three seconds.
Plug and Play Kits
You may plug in and start using plug and play remote start kits. This implies that during installation, you won’t need to cut or splice cables. Some of our preferred plug-and-play kits are listed below:
It’s simple to install the Start-X Complete Plug N Play Remote Starter Kit. The Toyota Tundras from 2010 to 2017 can use it. Because it is a plug-and-play remote start kit, there is no need to splice wires during installation. Additionally, this kit features an optional add-on feature that enables you to use your smartphone to remotely access the controls on your vehicle.
The Start-X Remote Starter for Tundra is a remote starter kit that is available for Toyota Tundra models that are 2020 model year or newer. Additionally, it is a plug-and-play kit, which simplifies installation. This device allows you to remotely lock and unlock your doors using your original keypad. Once installed, all you have to do to start a vehicle remotely is lock it three times.
Hard-Wired Kits
The installation of hard-wired remote start kits does require some expertise. When installing them, you might also need to turn off some electrical features. We suggest the following hard-wired kits:
For Toyota Tundras from 2018 to 2021, the MPC Factory Remote Activated Remote Start Kit is recommended. This package includes preloaded firmware and a T-harness. It comes pre-loaded with all the necessary firmware and is ready to be set up for use with your car. This kit is best suited for Tundras with installed remote entry systems, though.
You might want to look at the MPC Complete 2-Way LCD Remote Start Kit With Keyless Entry if you drive an older Toyota Tundra. This kit was created for Toyota Tundras from 2007 to 2010. Additionally, it comes pre-loaded with the firmware and enables remote access to your vehicle’s controls up to 3,000 feet away. You must temporarily override your vehicle’s immobilizer system in order to install this kit, which calls for considerable technical know-how.
How can I start my key fob remotely?
In order to remotely start your car:
- To lock every door, press the Lock button on your key fob.
- Two times on the Remote Start button. Each step must be completed in 3 seconds. The vehicle will start after two flashes from the external lights.
Do I have remote start on my key fob?
If you spot a button with a clockwise-moving circular arrow, you’ll know it’s there. That is the remote engine start button, though the key fob itself does not have a label for it. For those who are already familiar with this button’s use, it involves hitting the lock button first, then the remote engine start button. No problem, isn’t it? Other key fobs include a button in the same location, but they have a different sequence for remotely starting the engine. The circular arrow emblem on Ford key fobs, for instance, reads “2xother fobs are labeled “X2, which means the samepositioned inside the circle. This informs you that in order to remotely start the car’s engine, you must click the button twice. This button is frequently seen in many key fobs, therefore it’s not really thought of as a hidden feature. However, other car manufacturersmost notably BMWuse modern key fobs without the button. However, this does not imply that these key fobs lack these functionalities merely because there isn’t a circular arrow button to click. By rapidly pressing the “lock button on the key fob, one can remotely start an engine in a modern BMW by doing so. You don’t need to become daring and try out this sequence to test if the engine activates after pushing the lock button three times in a single second if your key fob has the circular arrow button. However, if it doesn’t, it won’t harm to try it out and see if it manages to complete the task in some way.
Has Toyota Smart Key remote starting capability?
The Smart Key fob in your car can be used to start and stop your engine with Toyota’s remote start system. In order to ensure that your car’s interior is at the perfect temperature when you get in and drive to your next location, this feature also lets you turn on the air conditioner, heater, and defroster.
What is Toyota Remote Connect, and how do I use it?
The Toyota app must first be downloaded to your phone before the QR code can be scanned:
- THE TOYOTA APP MUST BE DOWNLOADED TO YOUR SMARTPHONE.
- SELECT THE NATION AND LANGUAGE.
- Only your Toyota account is created after all of this. Keep an eye out for an email from Toyota containing a 6-digit passcode to finish the Remote Connect setup.
Does the Toyota remote Connect need a fee?
On all new Toyotas, depending on the model, buyers receive a free trial of Toyota Remote Connect that lasts somewhere between three and ten years. The service has an after-trial price of either $8 per month or $80 per year. Other features of Toyota Remote Connect make the cost of purchasing it worthwhile.
Is remote connect a feature on all Toyotas?
Entune, Toyota’s proprietary high-tech multimedia system, is standard equipment in every Toyota vehicle. Remote Connect is one of this system’s incredibly useful components. With Remote Connect, you may start your car’s engine and lock your car remotely, as the name of the feature says.