The key thing to remember is that there are numerous strategies to try if one works.
- Take away all 6 cone washers.
- Remove the lock ring from the axle shaft’s end.
- Pull the hub body away.
- Beat the tabs on the lock washer holding the outer lock washer back.
- Get rid of the outer spindle nut.
- Get rid of the lock washer.
- Inner spindle nut removal
- Take a firm hold of the brake rotor and just lift the entire assembly off the
- Remove the press washer and outer bearing from the hub.
- The seal holding the inner bearing in place is removed with the aid of a seal puller.
- Another choice is to tap the bearing and seal while holding the hub upside-down.
- Remove the spindle, together with the gaskets and seals that were placed underneath it.
- Make a meticulous note of the parts’ placement for future reassembly.
- Now, if necessary, the Birfield joint can be taken out:
- align the Birfield joint’s flats with the knuckle bearings and
- Just slightly loosen the nuts on the tie rod ends and remove the cotter pins.
- Use your preferred tie rod pulling method now, such as BFH, pickle fork, or
- Remove any additional steering components, such as drag links, etc., from the
- Next, free the nuts holding the lower bearing and upper steering arm.
Second-type cone washer encounters:
- larger washers, identical design as those on the hubs, four on top, four
- To detach the steering arm from the knuckle bearing, whack it with a hammer.
How much does rebuilding a front axle cost?
Costs of Front Axle Repair Before taxes and fees, the price to fix an axle ranges between $500 and $600. The type of vehicle, brand, manufacture, and model affect cost. Depending on how long it takes to complete the service for a particular model of vehicle, labor expenses can range from from $50 to $140.
What Toyota axles are the strongest?
Toyota Pickup and 4Runner RCV Ultimate 30 Spline Axle Set with 300M Inner Axle – STRONGEST – 300M INNER AXLE AND STAR These axles, which include 300M inners and a 300M star, are the strongest ones you can get. For your Toyota pickup or 4Runner, these Birfield axleshafts are the toughest you can find.