With a keyless entry system, entering and exiting the car is a breeze. And giving a spare fob to a reliable friend or family member is an excellent method to make sure you have one on hand in case you need it.
Here is how to program a keyless remote for a Toyota Prius:
- Open the driver’s door after unlocking it.
- Within five seconds, place the key fob twice into the dash’s key slot.
- Close the driver’s door before opening it once more. Repeat this twice.
- Re-insert and take out the key fob.
- Twice close and reopen the driver’s door.
- Re-insert the key fob and leave it. Knock on the door.
- Do not depress the brake pedal while pressing the power button. Press power once more after waiting. Repeat this three times more.
- Get out of the car and remove the key fob from the slot. To signal that you are in Add Mode, the Prius should automatically lock and unlock the doors twice.
- The programming is finished by pressing the lock button after pressing and holding the two buttons on the new fob for two seconds.
Now that your replacement key fob is prepared, you may feel secure knowing that you have a backup in case you are locked out. Take a moment to look at the Jerry app to see how much you can save on your auto insurance before you get back on the road.
In less than a minute, Jerry will compile comparative quotes from leading suppliers. Jerry collects your data from your former insurance, so you won’t have to fill out any time-consuming forms or make any unnecessary phone calls. In essence, you have full coverage and discounts without any hassles.
In This Article...
I have a Toyota Smart Key; how can I program it?
Process for Programming a Toyota Key Fob
- The Toyota’s driver’s seat is where you should be.
- From “off” to “on,” turn your key in the ignition.
- Within five seconds, quickly turn your ignition key from “off” to “on” again.
- Your ignition key needs to be removed.
- Close and reopen the driver’s door twice in the next 40 seconds.
Can you program your own Toyota key?
Although buying a remote control straight from Toyota will save you time from having to reprogram it yourself, learning how to program a Toyota key fob yourself will allow you to save money. Fortunately, it’s a short and simple process.
What is Toyota’s key programming fee?
Visit your neighborhood Toyota shop or use a mobile vehicle locksmith in Maricopa, Arizona, to obtain a replacement Toyota Smart Key.
Toyota Smart keys will run you anywhere from $260 to $400, including programming and key cutting. Get an Instant Estimate depending on the location, year, and model of your Toyota.
Yes! Although most of the time the cost of the key is negligible in relation to the expense of programming it, if you purchased a spare key online, you can contact a local auto locksmith to do it for you.
Can a key fob be programmed without visiting the dealership?
“Due to the pricey programming equipment needed, a new-car dealer will typically be your best option if you need a replacement key fob for a vehicle that was manufactured within the last five years, according to John Ibbotson, CR’s chief mechanic.
We discovered from Audi and Subaru dealers that some key fobs won’t function with aftermarket key fobs, despite the temptation to go for a less expensive one online.
“According to a service advisor at Hoffman Audi of East Hartford, Connecticut, if you need a new key fob for your Audi, it must come from us. The key fob has a built-in security chip that cannot be modified to work with another Audi. A new aftermarket Audi key fob cannot be purchased online because of the requirement for this chip.” He claimed that the car’s security now depends heavily on the fob. We were informed that the typical cost of replacing an Audi key fob, including programming, is $500.
This applies to all European vehicles, not just Audi. Because the manufacturer can only program the digital key encryption in a small number of exclusive stores in North America, they nearly always require the customer to see a dealer, said Yu of CR.
Other merchants we contacted, such a Lexus dealership and a Chrysler/Jeep/Dodge dealership, stated they don’t mind attempting to program aftermarket fobs if the buyer requests it as long as the customer is aware of the dangers.
A service advisor at a Lexus dealer told us that they were reluctant to work with aftermarket key fobs.
If we try to program it and it doesn’t function, we still have to charge them for our labor even if we can’t guarantee components or labor.
Fortunately, even if you have to visit a dealer, the procedure is quick. Key-fob programming, according to the majority of the dealers we spoke with, usually only requires 15 to 30 minutes, and the entire process, including creating the mechanical replacement key, rarely lasts longer than an hour.
Even if they handle everything for you, going to the dealer doesn’t have to be expensive. Even with European brands, this held true. A replacement fob with a laser-cut key and programming for CR’s 2015 VW Jetta would cost roughly $225, according to a local Volkswagen dealer with whom we spoke.
Customers can save money on programming with some companies, like Chevrolet. For instance, a Chevrolet official informed us that the key-fob programming does not need to be done at the dealership and that General Motors key fobs are on the more affordable side ($147.98 for a 2019 Chevrolet Malibu with keyless entry, push-button start, and remote start).
“The vehicle must be present, but the programming process is outlined in the owner’s manual, he added.
Be advised that most customer-programmable key fobs, regardless of brand, require two active, functional keys in order to program a third new key without visiting the dealer, according to Yu.
Can a key fob be programmed without a programmer?
Transponder technology is now widely used in vehicles nowadays and is seen in many locations that require security clearance. The transponder chip in modern vehicle keys is activated when the key is inserted into the ignition by the radio frequency signal sent from the ignition barrel.
When the signal received from the chip is verified as accurate by the vehicle’s ECU, the immobilizer is turned off and the engine is started.
Can you program a new key fob yourself?
You can usually program the key fob yourself if that’s all you need to unlock the automobile. Without the appropriate equipment, it is however impossible to program a key for the start function.
How much does it cost to reprogram a key fob?
In most car models, reprogramming a key fob for the lock and unlock is free if you do it yourself. However, you should budget between $200 and $500 for reprogramming at a workshop if you need to configure the immobilizer feature.
How to program key fob push start?
Because the immobilizer can only be accessed by authorized dealers, the correct diagnostic instruments are typically required to configure key fob push-starts. You only need to learn how to properly turn on the ignition if you only want to reprogram the unlock and lock feature because the process is the same as with a regular key.
How to erase key fob memory?
You need to use a compatible OBD2 diagnostic tool to clear the key fob memory. You frequently need a specific tool for your automobile model because not all general scanner instruments can perform this.
Without my original Toyota key, how do I program it?
If you purchased a new key from the dealer, follow these easy steps to program your transponder key without the original key. Only some car models will be compatible with this, and occasionally you may require more sophisticated diagnostic equipment. But before phoning your authorized dealer, you might want to attempt these simple and cost-free methods.
Turn on Ignition
Put the key in the ignition while seated in the driver’s seat. Position the ignition so that it is ON. There should be a security light on.
There might be an issue with the car battery if you can’t see the security light. Check the voltage and, if necessary, charge it.
To guarantee that the voltage will remain constant throughout the procedure, use a car battery charger.
Wait
For 15 minutes, the security light must be on. If you want to program the key, do not touch the system for at least 15 minutes.
You could pause the timer and go outside. After all, you have plenty of things you can do while you wait for 15 minutes.
Switch Off and On
After 15 minutes, the security light ought to turn off. Keep a tight eye on it; you’ve got three minutes to get back to the key after this.
Reverse the key’s direction such that it is now in the ON position. Once more, the security lamp will be on for 15 minutes.
Repeat Steps
At around 15 minutes, the security light will turn on once more. The steps from the previous stage will be repeated by you. Restart the key by turning it off and on.
This ought to turn on the security light once more. You might be getting tired now, with only another fifteen minutes to wait. But this ought to be the last time you have to take this action. These easy steps should produce the key and have it ready to use in 45 minutes. Make sure the key starts the car by testing it. Just remember that the original key won’t work anymore. It won’t operate if you happen to discover it after programming a new key.
Reprogramming a Toyota key fob is possible?
It can be very annoying to have a broken key fob, but hopefully reprogramming the key will get you back on the road!
Reprogramming a Toyota key fob involves:
Keeping all other doors closed and the key off the ignition, start by opening the driver’s side door.
Step two is to twice insert and withdraw the key from the ignition without turning it within five seconds.
Step three: Close and open the driver’s side door twice within 40 seconds. Without twisting the key, insert and remove the key from the ignition.
Step 4: In the following 40 seconds:
- The driver’s side door is closed and opened twice.
- Keep the key in the ignition after inserting it.
- Lock the door on the drivers side.
- Without starting the engine, switch the ignition from off to on.
- The ignition key should be removed.
- Step five is: The doors should automatically lock and then unlock after three seconds to signal that you are in programming mode. If the doors do not lock and unlock on their own, go back and repeat steps one through four.
- Step six is: 40 seconds after switching to programming mode:
- On the remote, simultaneously press and hold the lock and unlock buttons for less than two seconds before letting go.
- For two seconds, press and hold the lock button. To demonstrate that the key was successfully programmed, the doors should automatically lock and unlock.
- The key was not successfully programmed if the doors lock and unlock twice, so you must repeat the previous two stages.
- Step seven is: Driver’s side door, open.
You will need to order a replacement for roughly $200 if the aforementioned measures don’t work, which is pricey. Use Jerry to reduce the cost of your auto insurance if you want to save some money.
Jerry will handle the phone calls, paperwork, and renewals for your top option after giving you a thorough cross-analysis of the best plans from over 50 providers so you don’t have to. They even assist in removing your old insurance.
Step 3: Cycle the Ignition
Put your key in the ignition and hold down the “UNLOCK” button on your door. We will now turn the ignition on and off twice. Please take note that we are merely turning the key one notch to power the electrical systems, not starting the car.
Step 5: Hold Down the “UNLOCK and “LOCK Button on Your Fob
Press and hold the “LOCK” and “UNLOCK” buttons on the key fob simultaneously until the locks cycle one more to program your keyless-entry remote. Please be patient as this could take up to 30 seconds.