Having an extra set of keys handy is usually a smart idea, whether you decide to keep them in the house or give them to a friend or family member. However, you must make sure that they are properly programmed before they can be of any value.
Follow these easy steps to program a key fob for a 2010 Toyota Corolla:
- Open your automobile door, close it, and then reopen it to activate programming mode.
- Close the door after inserting the key into the ignition.
- One key turn to the ON position will do. Never start the car.
- You should now be able to add a new remote after turning the car off.
- Your ignition key needs to be removed.
- Two seconds should be spent holding down the lock and unlock buttons on the key fob before releasing them.
- Your key fob should be programmed after doing this twice.
Keep in mind that your new key fob should be configured if you purchased it from an auto locksmith or dealership. If it’s not, get in touch with them.
You can be sure that you’re protected in case of a lockout now that your Toyota key fob has been properly programmed. In addition, since we’re on the subject of coverage, make sure to check out the Jerry app to see how much money you may save on your auto insurance.
After you download Jerry, all you need to do is respond to a few questions that will take you around 45 seconds to do, and you’ll get car insurance rates for coverage that is identical to your current plan right away. Customers of Jerry save $879 year on average.
In This Article...
My Toyota Corolla key needs to be reprogrammed.
Within five seconds, turn your ignition key from “off” to “on” again. Your ignition key needs to be removed. Close and reopen the driver door twice in the following 40 seconds. Then, put the key in and take it out of the ignition once again. Once more, make sure you finish steps 1 and 2 within 40 seconds.
How can a Toyota key be personalized for you?
Process for Programming a Toyota Key Fob
- The Toyota’s driver’s seat is where you should be.
- From “off” to “on,” turn your key in the ignition.
- Within five seconds, quickly turn your ignition key from “off” to “on” again.
- Close and reopen the driver’s door twice in the next 40 seconds.
Can you create a key on your own?
There are a few manufacturers who will let you program a single key even if you don’t have a working key. Remember that you’ll still need to have the key cut to suit the ignition, which necessitates presenting the locksmith with evidence of ownership.
Nevertheless, it is far easier to do this than to program a second or third key:
- Turn the ignition to the on position after inserting the key. Just the electronics, leave the engine off.
- After 10 minutes and 30 seconds, switch off the light by turning the key.
- Restart the key, then wait another 10 minutes and 30 seconds before turning it off once more.
- Thirdly, repeat the procedure.
- To program the key, turn it back to the on position.
- In order to test your new key, start the engine.
Without the original, how can a Toyota transponder key be programmed?
If you purchased a new key from the dealer, follow these easy steps to program your transponder key without the original key. Only some car models will be compatible with this, and occasionally you may require more sophisticated diagnostic equipment. But before phoning your authorized dealer, you might want to attempt these simple and cost-free methods.
Turn on Ignition
Put the key in the ignition while seated in the driver’s seat. Position the ignition so that it is ON. There should be a security light on.
There might be an issue with the car battery if you can’t see the security light. Check the voltage and, if necessary, charge it.
To guarantee that the voltage will remain constant throughout the procedure, use a car battery charger.
Wait
For 15 minutes, the security light must be on. If you want to program the key, do not touch the system for at least 15 minutes.
You could pause the timer and go outside. After all, you have plenty of things you can do while you wait for 15 minutes.
Switch Off and On
After 15 minutes, the security light ought to turn off. Keep a tight eye on it; you’ve got three minutes to get back to the key after this.
Reverse the key’s direction such that it is now in the ON position. Once more, the security lamp will be on for 15 minutes.
Repeat Steps
At around 15 minutes, the security light will turn on once more. The steps from the previous stage will be repeated by you. Restart the key by turning it off and on.
This ought to turn on the security light once more. You might be getting tired now, with only another fifteen minutes to wait. But this ought to be the last time you have to take this action. These easy steps should produce the key and have it ready to use in 45 minutes. Make sure the key starts the car by testing it. Just remember that the original key won’t work anymore. It won’t operate if you happen to discover it after programming a new key.
How can I program the key for my 2009 Toyota Corolla?
Without starting the engine, turn the ignition to ON, then turn it back off. When you remove the ignition key, the locks should cycle to indicate that you are in programming mode. Your new key fob’s lock and unlock buttons should be held down for two seconds each before releasing. Repeat for a further two seconds before releasing.
Can a Toyota key be programmed by a locksmith?
Toyota keys made after 1991 are duplicated by locksmiths. In reality, your car’s smart key and the newest Toyota keys can be programmed by our locksmiths. What you as a car owner should be aware of while looking around for a replacement car key or to build a spare key
Can a key fob be programmed without visiting the dealership?
“Due to the pricey programming equipment needed, a new-car dealer will typically be your best option if you need a replacement key fob for a vehicle that was manufactured within the last five years, according to John Ibbotson, CR’s chief mechanic.
We discovered from Audi and Subaru dealers that some key fobs won’t function with aftermarket key fobs, despite the temptation to go for a less expensive one online.
“According to a service advisor at Hoffman Audi of East Hartford, Connecticut, if you need a new key fob for your Audi, it must come from us. The key fob has a built-in security chip that cannot be modified to work with another Audi. A new aftermarket Audi key fob cannot be purchased online because of the requirement for this chip.” He claimed that the car’s security now depends heavily on the fob. We were informed that the typical cost of replacing an Audi key fob, including programming, is $500.
This applies to all European vehicles, not just Audi. Because the manufacturer can only program the digital key encryption in a small number of exclusive stores in North America, they nearly always require the customer to see a dealer, said Yu of CR.
Other merchants we contacted, such a Lexus dealership and a Chrysler/Jeep/Dodge dealership, stated they don’t mind attempting to program aftermarket fobs if the buyer requests it as long as the customer is aware of the dangers.
A service advisor at a Lexus dealer told us that they were reluctant to work with aftermarket key fobs.
If we try to program it and it doesn’t function, we still have to charge them for our labor even if we can’t guarantee components or labor.
Fortunately, even if you have to visit a dealer, the procedure is quick. Key-fob programming, according to the majority of the dealers we spoke with, usually only requires 15 to 30 minutes, and the entire process, including creating the mechanical replacement key, rarely lasts longer than an hour.
Even if they handle everything for you, going to the dealer doesn’t have to be expensive. Even with European brands, this held true. A replacement fob with a laser-cut key and programming for CR’s 2015 VW Jetta would cost roughly $225, according to a local Volkswagen dealer with whom we spoke.
Customers can save money on programming with some companies, like Chevrolet. For instance, a Chevrolet official informed us that the key-fob programming does not need to be done at the dealership and that General Motors key fobs are on the more affordable side ($147.98 for a 2019 Chevrolet Malibu with keyless entry, push-button start, and remote start).
“The vehicle must be present, but the programming process is outlined in the owner’s manual, he added.
Be advised that most customer-programmable key fobs, regardless of brand, require two active, functional keys in order to program a third new key without visiting the dealer, according to Yu.
Has a 2013 Toyota Corolla’s key been chipped?
Toyota has replaced the Toyota Corolla’s keys five times. Depending on the year of manufacture, your Toyota Corolla will need a specific kind of key. The Toyota Corolla’s primary types are shown below, organized by year:
- Your Toyota Corolla only needs a standard simple key if it was built in the following years: 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, or 2004. This key is featureless and does not require programming to your vehicle.
- Your Toyota Corolla needs a transponder chip key if it was built in the years 2005, 2006, 2007, or 2008. This key must be programmed to the car’s immobilizer in addition to being cut because it contains a secret electronic chip.
- You might have either a transponder chip key or a remote key combination if your Toyota Corolla was produced in 2009. Both of these key types must be programmed to work with your vehicle.
- You can have one of three key kinds if your Toyota Corolla was manufactured in 2010 or 2011. Transponder chip keys, remote key fob keys, and Toyota G chip keys are all options. These keys will all need to be programmed to work with your vehicle.
- You may use one of two keys if your Toyota Corolla was built in 2012 or 2013. You can use a Smart key or a letter G chip key. You will need to program each of these key types to your vehicle.
- You can get further information by giving a Toyota shop your car’s VIN number to ensure what kind of key your Toyota needs.