Previously a cool extra, remote entry devices are now commonplace in many cars. While some current key fobs require dealer programming, older ones can probably be configured manually.
To program your 2009 Toyota Corolla key fob, follow these instructions:
- Leave your driver’s side door open and unlocked as you take the wheel.
- Put the ignition on with your key (dont turn the ignition on). Take that out. Then carry out the procedure a second time.
- Twice close and open the door on the driver’s side.
- Pull remove your key after inserting it into the ignition.
- Two more times, shut and reopen the driver’s side door.
- Place your key in the ignition and leave it there for now.
- Keep the driver’s side door closed.
- Without starting the engine, turn the ignition to ON, then turn it back off.
- When you remove the ignition key, the locks should cycle to indicate that you are in programming mode.
- Your new key fob’s lock and unlock buttons should be held down for two seconds each before releasing.
- Repeat for a further two seconds before releasing.
- To verify that your remote is programmed, the vehicle’s locks should cycle.
- Open your door to exit programming mode. Test the key fob after that!
Although it could appear complicated and time-consuming, this process should just take a short while. On the other hand, if you’d prefer not to program it yourself, you may always bring your car and new key to a dealer.
Take a moment to reduce your auto insurance with Jerry while you’re waiting to have your key coded. The Jerry app, a certified broker, assists users in saving $879 annually on auto insurance on average. Simply download the app, respond to a few questions, and Jerry will provide you free assistance in comparing rates from more than 50 leading providers.
In This Article...
How is a Toyota Corolla key fob programmed?
Within five seconds, turn your ignition key from “off” to “on” again. Your ignition key needs to be removed. Close and reopen the driver door twice in the following 40 seconds. Then, put the key in and take it out of the ignition once again. Once more, make sure you finish steps 1 and 2 within 40 seconds.
How can a Toyota key be personalized for you?
Process for Programming a Toyota Key Fob
- The Toyota’s driver’s seat is where you should be.
- From “off” to “on,” turn your key in the ignition.
- Within five seconds, quickly turn your ignition key from “off” to “on” again.
- Your ignition key needs to be removed.
- Close and reopen the driver’s door twice in the next 40 seconds.
A transponder is present in a 2009 Toyota Corolla, right?
From 1998 to 2017, compatible with a variety of Toyota and Scion cars. has a DOT chip, also known as a 4D-67 (TOY44D-PT) transponder chip, incorporated in it.
Can I set up a key fob on my own?
Many automakers have started designing vehicles with locks that can be unlocked with little more than a key fob since the development of remote technology. The owner of a key fob can easily unlock a door by pressing a button, and many of them can also start their car by pressing a button as long as the fob is inside.
Unfortunately, the dealership may assert that they have property rights over the device and, as a result, only they can make a copy and program it, which comes with an outrageous charge, if a car owner loses their key fob or wishes to make an extra copy. However, while making a new key fob and programming it to function with your automobile may require expert guidance, a knowledgeable locksmith may help you with this task without forcing you to go back to the dealership for assistance.
Wait, is it illegal to create a new key fob without the dealer’s consent?
Some dealers can even claim that if the task is not carried out by a licensed operator, making a new key fob is illegal. However, even if this might be the case with a leased or rented car, you are probably allowed to create as many copies as you want with the assistance of a professional.
Additionally, programming a key fob to work with your car is also not a difficult process. While you shouldn’t attempt to manufacture a copy yourself, a skilled locksmith can provide you with a new key fob quickly.
Replace the batteries inside the key fobs
If you haven’t changed the battery in the key fob(s) in a while, do so now before continuing. When you try to reprogram a key fob with a defective battery, it can be a real pain. The batteries are often inexpensive and simple to replace. If you are unsure how to change them, consult your owner’s manual.
Get inside the car
With your car keys and the remote in hand, go in the driver’s seat and lock all the doors. Closing the doors is crucial because if you leave one open, it can disrupt the procedure.
Turn on the ignition
Once seated, turn the key to the “On” position in the ignition to turn the electrical systems on. Do not start the engine and double-check that the ignition is not in the radio mode.
Press the lock button on the remote key
Turn the key back to the “Off” position while holding down the lock button on the fob. At least three times, go through this process, finishing with the key in the “On” position. This notifies your electronic control units that the signal is coming from your key in the ignition and does save the info later. How to Start & Unlock a Car With a Dead Key Fob
Listen for a Lock Sound
You will hear the lock sound once you have completed the aforementioned steps. You have now accessed the programming mode, as indicated by this. Press the lock button once more in the following five seconds to complete the programming.
Programming additional remotes
If there are other remotes, program them successfully by pressing the “Lock” button within 10 seconds after entering the programming mode.
Step out from your car and test the result
Close all doors as you exit the vehicle and take your key fobs with you. Test the functionality of both unlocks with each of your key fobs that were programmed.
What is the cost for Toyota to program a key fob?
Visit your neighborhood Toyota shop or use a mobile vehicle locksmith in Maricopa, Arizona, to obtain a replacement Toyota Smart Key.
Toyota Smart keys will run you anywhere from $260 to $400, including programming and key cutting. Get an Instant Estimate depending on the location, year, and model of your Toyota.
Yes! Although most of the time the cost of the key is negligible in relation to the expense of programming it, if you purchased a spare key online, you can contact a local auto locksmith to do it for you.
How is a 2009 Toyota Corolla programmed?
Without starting the engine, turn the ignition to ON, then turn it back off. When you remove the ignition key, the locks should cycle to indicate that you are in programming mode. Your new key fob’s lock and unlock buttons should be held down for two seconds each before releasing. Repeat for a further two seconds before releasing.
Has the key to my Toyota been chipped?
Toyotas are fantastic! Each year, hundreds of Toyota vehicles are serviced by our certified and insured locksmith professionals. We can help you whether you need a spare key, need some keyless entry remotes programmed, or even if you’ve misplaced all of your keys! If you own a Toyota car, truck, or SUV that was manufactured between 1998 and 2004, there are a few important notes you should be aware of. Because Toyota forbade access to the ECU via the vehicles’ OBD-II Port, some earlier Toyota models equipped with “Type 1” vehicle immobilizer units need to be flashed.
Just need a spare?
No issue! It’s preferable to create as many copies of the key as you require while you still have it. Four or more keys can typically be accepted by modern vehicles and stored in memory. This may be useful if you share a car with multiple individuals or if one of your drivers has a propensity for misplacing his or her keys.
All keys lost?
I understand! We are still able to assist you. Please be aware that when all keys are lost, the problem may become a little more complicated. If your vehicle is one of the older Toyotas that needs flashing, please see our guide.
REPLACEMENT TOYOTA CAR & TRUCK KEYS
Going to the dealership to get a spare key for a Toyota costs money. A key for a 2008 Scion tC cost one of our locksmiths $247 including tax. This key is the same one that is used in numerous Toyota Camry, Corolla, and other automobile and truck models. We’ll charge substantially less to produce a key for your Toyota. For automobile keys, our costs are often half of what the Toyota Dealership charges.
HOW DO I KNOW WHICH KEY I HAVE?
Your Toyota will use a transponder key and one of their several engine immobilizer systems, depending on the year it was manufactured. The Toyota D Chip, often known as the “Dot” Key, is likely the most well-known. A quick check at the key’s metal blade will reveal which key it is. If your key is a Toyota D Transponder key, you will see a tiny dimple or dot that is about three times the size of a ballpoint pen.
My Key has a D, G, or an H on it… What does that mean?
Toyota started using transponder keys as an anti-theft technique in the late 1990s. One of the earliest transponder chips utilized was the D Chip, often known as the “Dot Chip” in popular parlance. They have two more transponder key versions. both the G and H chips. The consumer doesn’t really care about the smaller nuances, but it’s crucial to know that the keys are neither cross- nor backward-compatible. To put it another way, if your key is marked G, you cannot operate a remote control that is marked H. Customers frequently think that a newer vehicle’s remote style is more aesthetically pleasant and wish to “upgrade” to imitate the look of the newer vehicle. However, this is impossible because radio frequency and encoding modifications depend on the design year. It’s important to pay attention and pick the appropriate model while looking for replacement car keys and remotes for your vehicle.
The dealer said you have to replace my Car or Trucks computer (ECU)
The early models of Toyota and Lexus are very different from the later variants. It is clear why this is the case. The ECU (the component of the automobile that stores the information for the car key) cannot be accessed using the OBD-II diagnostic port on earlier models. This implies that, unlike us on later models, no locksmith (not even the dealer) can just plug in a diagnostic equipment and add in keys. It’s unfortunate, but don’t be angry with us! On Toyota ECU flashing and key replacement for previous models, we provide affordable rates. The cost of this service at the dealership is frequently above $1000, but a locksmith can typically accomplish it for as low as a third of the dealership price.
What is a Toyota Corolla reset procedure?
Find the “travel reset button” on the odometer, then push and hold it. Till “Trip A” shows on the screen, keep pressing the button. Reset the key to “Off” after that. Turn the key back to the “On position after finding the “trip reset button once more.
What does a 2009 Toyota Corolla’s maintenance required light mean?
On your dashboard, the Toyota maintenance light may read “MAINT REQD. It’s a light that is always on and alerts you when you require an oil change at a licensed auto shop. Your Toyota will run more smoothly and efficiently if you change the oil in your car.
How can the VSC light be turned off on a 2009 Toyota Corolla?
Vehicle Stability Control, or VSC as it is commonly known, is the stability control system used in Toyota automobiles. By lowering or eliminating the power provided to your wheels, stability control aids in the maintenance of traction and control in your vehicle. By automatically providing brake pressure to up to three wheels, it achieves this. The system’s main objective is to keep your car traveling in the direction of its wheels. Since 2012, at least in the USA, it has become a necessary safety requirement. Naturally, VSC OFF denotes that your Toyota’s stability control is turned off.
VSC Light Easy Fix
Depending on the model year of the Toyota, a button with the same icon as the light in your gauges will be located either next to your shifter or next to your steering wheel. When you’ve found it:
- Ensure that you have come to a complete stop. If you can, put the car in park.
- For a few seconds, hold down the VSC button.
- The indicator lights for TRAC OFF and VSC OFF will turn on. Now both systems are off.
- Once more, press the VSC button. As soon as both lights go out, the systems are back in operation.
If the VSC OFF light is still on, there can be a glitch in your car’s computer or a problem with the VSC system. Bring your car to a Toyota service location near you so a qualified technician can check the codes and identify the problem. Although it is safe to drive your Toyota even with the VSC OFF light on, we advise caution, especially in bad weather.
In Need of Repair?
Bring your car to the Toyota of Arlington servicing facility if you live close to Chicago and need repairs. We can install OEM parts for you because we have access to them. Get a free estimate from our outstanding collision facility if you need body work.