With a keyless entry system, entering and exiting the car is a breeze. And giving a spare fob to a reliable friend or family member is an excellent method to make sure you have one on hand in case you need it.
Here is how to program a keyless remote for a Toyota Prius:
- Open the driver’s door after unlocking it.
- Within five seconds, place the key fob twice into the dash’s key slot.
- Close the driver’s door before opening it once more. Repeat this twice.
- Re-insert and take out the key fob.
- Twice close and reopen the driver’s door.
- Re-insert the key fob and leave it. Knock on the door.
- Do not depress the brake pedal while pressing the power button. Press power once more after waiting. Repeat this three times more.
- Get out of the car and remove the key fob from the slot. To signal that you are in Add Mode, the Prius should automatically lock and unlock the doors twice.
- The programming is finished by pressing the lock button after pressing and holding the two buttons on the new fob for two seconds.
Now that your replacement key fob is prepared, you may feel secure knowing that you have a backup in case you are locked out. Take a moment to look at the Jerry app to see how much you can save on your auto insurance before you get back on the road.
In less than a minute, Jerry will compile comparative quotes from leading suppliers. Jerry collects your data from your former insurance, so you won’t have to fill out any time-consuming forms or make any unnecessary phone calls. In essence, you have full coverage and discounts without any hassles.
In This Article...
How can I program the keyless entry remote for my Toyota?
How to Set Up a Toyota Car Remote
- Within five seconds, turn your ignition key from “off” to “on” again.
- Close and reopen the driver door twice in the following 40 seconds. Then, put the key in and take it out of the ignition once again.
- Once more, make sure you finish steps 1 and 2 within 40 seconds.
Replace the batteries inside the key fobs
If you haven’t changed the battery in the key fob(s) in a while, do so now before continuing. When you try to reprogram a key fob with a defective battery, it can be a real pain. The batteries are often inexpensive and simple to replace. If you are unsure how to change them, consult your owner’s manual.
Get inside the car
With your car keys and the remote in hand, go in the driver’s seat and lock all the doors. Closing the doors is crucial because if you leave one open, it can disrupt the procedure.
Turn on the ignition
Once seated, turn the key to the “On” position in the ignition to turn the electrical systems on. Do not start the engine and double-check that the ignition is not in the radio mode.
Press the lock button on the remote key
Turn the key back to the “Off” position while holding down the lock button on the fob. At least three times, go through this process, finishing with the key in the “On” position. This notifies your electronic control units that the signal is coming from your key in the ignition and does save the info later. How to Start & Unlock a Car With a Dead Key Fob
Listen for a Lock Sound
You will hear the lock sound once you have completed the aforementioned steps. You have now accessed the programming mode, as indicated by this. Press the lock button once more in the following five seconds to complete the programming.
Programming additional remotes
If there are other remotes, program them successfully by pressing the “Lock” button within 10 seconds after entering the programming mode.
Step out from your car and test the result
Close all doors as you exit the vehicle and take your key fobs with you. Test the functionality of both unlocks with each of your key fobs that were programmed.
Can I set up a key fob on my own?
Many automakers have started designing vehicles with locks that can be unlocked with little more than a key fob since the development of remote technology. The owner of a key fob can easily unlock a door by pressing a button, and many of them can also start their car by pressing a button as long as the fob is inside.
Unfortunately, the dealership may assert that they have property rights over the device and, as a result, only they can make a copy and program it, which comes with an outrageous charge, if a car owner loses their key fob or wishes to make an extra copy. However, while making a new key fob and programming it to function with your automobile may require expert guidance, a knowledgeable locksmith may help you with this task without forcing you to go back to the dealership for assistance.
Wait, is it illegal to create a new key fob without the dealer’s consent?
Some dealers can even claim that if the task is not carried out by a licensed operator, making a new key fob is illegal. However, even if this might be the case with a leased or rented car, you are probably allowed to create as many copies as you want with the assistance of a professional.
Additionally, programming a key fob to work with your car is also not a difficult process. While you shouldn’t attempt to manufacture a copy yourself, a skilled locksmith can provide you with a new key fob quickly.
After changing the battery, is the Toyota key fob required to be reprogrammed?
A remote key fob needs to be associated with your vehicle particularly in order to be secure.
This stops people who drive the same make and model of automobile as you from using their remote to access your car. You’ll need to reprogram the fob if changing the batteries has erased this connection or if it was somehow disrupted in order for it to once again recognize your automobile.
Standard programming sequence
Your key fob can typically be reconfigured by following this typical procedure:
Instead of starting and then returning to the locked position, turn the key into the run position. Repeat this multiple times.
You’ll typically hear a chime or other sound when you’ve cycled the key enough times. At that point, you can push the lock or unlock button on your key fob to hear another chime.
How do I find out which battery my key fob uses?
Open your fob to find the battery your automobile key fob uses. There will probably be an engraving that starts with CR followed by a string of digits if the item contains a battery. Check your owner’s manual or search online for your car’s make, model, and year without a battery or engraving.
Will changing the battery on my key fob make it work again?
A dead battery is the most frequent cause of a key fob not functioning. Having said that, your keyfob might be having more serious issues. A key fob replacement or even automobile door lock repair may be necessary if it stops operating after a battery change.
How do I know if changing my key fob battery will fix my car key?
When the key does not function under any conditions, it is likely that the car key fob has a dead battery. On all door locks, all buttons have the same lack of effectiveness. When buttons are pressed, no lights illuminate, suggesting that no signal was transmitted. The backup fob, however, functions flawlessly.
What do I do if my key fob is not working after a battery change?
Before you replace the automobile remotes if your key fob still won’t work after a battery change, make sure your locks are operating properly. Additionally, make sure you didn’t unintentionally deprogram your keychain.
Can you fix a key fob not working after a battery change?
Although replacing the remote’s batteries might be the quickest repair for the problem, this is by no means your only option. Check to see if the key fob or the vehicle is the root of your issue. After determining the root cause, correct or change the damaged components.
What is the cost for Toyota to program a key fob?
Visit your neighborhood Toyota shop or use a mobile vehicle locksmith in Maricopa, Arizona, to obtain a replacement Toyota Smart Key.
Toyota Smart keys will run you anywhere from $260 to $400, including programming and key cutting. Get an Instant Estimate depending on the location, year, and model of your Toyota.
Yes! Although most of the time the cost of the key is negligible in relation to the expense of programming it, if you purchased a spare key online, you can contact a local auto locksmith to do it for you.
Why doesn’t my automobile recognize my key fob?
The most frequent cause of a keyless entry system failing to send signals is a faulty battery in the key fob. Use the extra key fob to unlock the car and turn on the ignition if one is available.
Use the key that is included in the spare fob if it is not available to unlock the door. Check your owner’s manual for information on how to start your automobile when the key fob malfunctions.
Can a key fob be programmed without visiting the dealership?
“Due to the pricey programming equipment needed, a new-car dealer will typically be your best option if you need a replacement key fob for a vehicle that was manufactured within the last five years, according to John Ibbotson, CR’s chief mechanic.
We discovered from Audi and Subaru dealers that some key fobs won’t function with aftermarket key fobs, despite the temptation to go for a less expensive one online.
“According to a service advisor at Hoffman Audi of East Hartford, Connecticut, if you need a new key fob for your Audi, it must come from us. The key fob has a built-in security chip that cannot be modified to work with another Audi. A new aftermarket Audi key fob cannot be purchased online because of the requirement for this chip.” He claimed that the car’s security now depends heavily on the fob. We were informed that the typical cost of replacing an Audi key fob, including programming, is $500.
This applies to all European vehicles, not just Audi. Because the manufacturer can only program the digital key encryption in a small number of exclusive stores in North America, they nearly always require the customer to see a dealer, said Yu of CR.
Other merchants we contacted, such a Lexus dealership and a Chrysler/Jeep/Dodge dealership, stated they don’t mind attempting to program aftermarket fobs if the buyer requests it as long as the customer is aware of the dangers.
A service advisor at a Lexus dealer told us that they were reluctant to work with aftermarket key fobs.
If we try to program it and it doesn’t function, we still have to charge them for our labor even if we can’t guarantee components or labor.
Fortunately, even if you have to visit a dealer, the procedure is quick. Key-fob programming, according to the majority of the dealers we spoke with, usually only requires 15 to 30 minutes, and the entire process, including creating the mechanical replacement key, rarely lasts longer than an hour.
Even if they handle everything for you, going to the dealer doesn’t have to be expensive. Even with European brands, this held true. A replacement fob with a laser-cut key and programming for CR’s 2015 VW Jetta would cost roughly $225, according to a local Volkswagen dealer with whom we spoke.
Customers can save money on programming with some companies, like Chevrolet. For instance, a Chevrolet official informed us that the key-fob programming does not need to be done at the dealership and that General Motors key fobs are on the more affordable side ($147.98 for a 2019 Chevrolet Malibu with keyless entry, push-button start, and remote start).
“The vehicle must be present, but the programming process is outlined in the owner’s manual, he added.
Be advised that most customer-programmable key fobs, regardless of brand, require two active, functional keys in order to program a third new key without visiting the dealer, according to Yu.
How can a key fob with a push-button start be programmed?
You may be able to program a keyless ignition fob for vehicles with a push-button starter in some circumstances. Even though it’s far from foolproof, it’s worth a shot before paying a dealer to program it for you.
- Get into the driver’s seat and close the door behind you while holding the key fob in your hand. Prepare to place one hand on the key fob and the other on the start button of the car. You’ll need to work rapidly, just like the processes mentioned before, so get ready for that.
- When you’re ready, quickly hit the start button on your car 15 times, with no more than two seconds passing between each try. Remember, you’re not actually trying to start the engine while doing this, so keep your foot off the brake.
- Press the lock button on your fob after the fifteenth button press. The car doors will lock and the fob will be fully functional if the pairing process was completed. If the attempt failed, it could be worthwhile to try it again to determine if there was a mistake in the first attempt. The timing of this strategy can be a little tricky and challenging to master the first time.