Having an extra set of keys handy is usually a smart idea, whether you decide to keep them in the house or give them to a friend or family member. However, you must make sure that they are properly programmed before they can be of any value.
Follow these easy steps to program a key fob for a 2010 Toyota Corolla:
- Open your automobile door, close it, and then reopen it to activate programming mode.
- Close the door after inserting the key into the ignition.
- One key turn to the ON position will do. Never start the car.
- You should now be able to add a new remote after turning the car off.
- Your ignition key needs to be removed.
- Two seconds should be spent holding down the lock and unlock buttons on the key fob before releasing them.
- Your key fob should be programmed after doing this twice.
Keep in mind that your new key fob should be configured if you purchased it from an auto locksmith or dealership. If it’s not, get in touch with them.
You can be sure that you’re protected in case of a lockout now that your Toyota key fob has been properly programmed. In addition, since we’re on the subject of coverage, make sure to check out the Jerry app to see how much money you may save on your auto insurance.
After you download Jerry, all you need to do is respond to a few questions that will take you around 45 seconds to do, and you’ll get car insurance rates for coverage that is identical to your current plan right away. Customers of Jerry save $879 year on average.
In This Article...
Can you make your own Toyota Corolla key programming?
Although buying a remote control straight from Toyota will save you time from having to reprogram it yourself, learning how to program a Toyota key fob yourself will allow you to save money. Fortunately, it’s a short and simple process. Avoid being locked out of Evergreen Park without a functional key!
How can a Toyota key be personalized for you?
Process for Programming a Toyota Key Fob
- The Toyota’s driver’s seat is where you should be.
- From “off” to “on,” turn your key in the ignition.
- Within five seconds, quickly turn your ignition key from “off” to “on” again.
- Close and reopen the driver’s door twice in the next 40 seconds.
Can I set up a key fob on my own?
Many automakers have started designing vehicles with locks that can be unlocked with little more than a key fob since the development of remote technology. The owner of a key fob can easily unlock a door by pressing a button, and many of them can also start their car by pressing a button as long as the fob is inside.
Unfortunately, the dealership may assert that they have property rights over the device and, as a result, only they can make a copy and program it, which comes with an outrageous charge, if a car owner loses their key fob or wishes to make an extra copy. However, while making a new key fob and programming it to function with your automobile may require expert guidance, a knowledgeable locksmith may help you with this task without forcing you to go back to the dealership for assistance.
Wait, is it illegal to create a new key fob without the dealer’s consent?
Some dealers can even claim that if the task is not carried out by a licensed operator, making a new key fob is illegal. However, even if this might be the case with a leased or rented car, you are probably allowed to create as many copies as you want with the assistance of a professional.
Additionally, programming a key fob to work with your car is also not a difficult process. While you shouldn’t attempt to manufacture a copy yourself, a skilled locksmith can provide you with a new key fob quickly.
Replace the batteries inside the key fobs
If you haven’t changed the battery in the key fob(s) in a while, do so now before continuing. When you try to reprogram a key fob with a defective battery, it can be a real pain. The batteries are often inexpensive and simple to replace. If you are unsure how to change them, consult your owner’s manual.
Get inside the car
With your car keys and the remote in hand, go in the driver’s seat and lock all the doors. Closing the doors is crucial because if you leave one open, it can disrupt the procedure.
Turn on the ignition
Once seated, turn the key to the “On” position in the ignition to turn the electrical systems on. Do not start the engine and double-check that the ignition is not in the radio mode.
Press the lock button on the remote key
Turn the key back to the “Off” position while holding down the lock button on the fob. At least three times, go through this process, finishing with the key in the “On” position. This notifies your electronic control units that the signal is coming from your key in the ignition and does save the info later. How to Start & Unlock a Car With a Dead Key Fob
Listen for a Lock Sound
You will hear the lock sound once you have completed the aforementioned steps. You have now accessed the programming mode, as indicated by this. Press the lock button once more in the following five seconds to complete the programming.
Programming additional remotes
If there are other remotes, program them successfully by pressing the “Lock” button within 10 seconds after entering the programming mode.
Step out from your car and test the result
Close all doors as you exit the vehicle and take your key fobs with you. Test the functionality of both unlocks with each of your key fobs that were programmed.
What is the cost for Toyota to program a key fob?
Visit your neighborhood Toyota shop or use a mobile vehicle locksmith in Maricopa, Arizona, to obtain a replacement Toyota Smart Key.
Toyota Smart keys will run you anywhere from $260 to $400, including programming and key cutting. Get an Instant Estimate depending on the location, year, and model of your Toyota.
Yes! Although most of the time the cost of the key is negligible in relation to the expense of programming it, if you purchased a spare key online, you can contact a local auto locksmith to do it for you.
Cost of a Toyota key fob
Replacing the entire key fob on a Toyota Normally, this product costs between $200 and $350. Make sure to look for any current parts offers that can reduce the cost of your entire Toyota key replacement.
How is a key fob for a 2009 Toyota Corolla programmed?
Previously a cool extra, remote entry devices are now commonplace in many cars. While some current key fobs require dealer programming, older ones can probably be configured manually.
To program your 2009 Toyota Corolla key fob, follow these instructions:
- Leave your driver’s side door open and unlocked as you take the wheel.
- Put the ignition on with your key (dont turn the ignition on). Take that out. Then carry out the procedure a second time.
- Twice close and open the door on the driver’s side.
- Pull remove your key after inserting it into the ignition.
- Two more times, shut and reopen the driver’s side door.
- Place your key in the ignition and leave it there for now.
- Keep the driver’s side door closed.
- Without starting the engine, turn the ignition to ON, then turn it back off.
- When you remove the ignition key, the locks should cycle to indicate that you are in programming mode.
- Your new key fob’s lock and unlock buttons should be held down for two seconds each before releasing.
- Repeat for a further two seconds before releasing.
- To verify that your remote is programmed, the vehicle’s locks should cycle.
- Open your door to exit programming mode. Test the key fob after that!
Although it could appear complicated and time-consuming, this process should just take a short while. On the other hand, if you’d prefer not to program it yourself, you may always bring your car and new key to a dealer.
Take a moment to reduce your auto insurance with Jerry while you’re waiting to have your key coded. The Jerry app, a certified broker, assists users in saving $879 annually on auto insurance on average. Simply download the app, respond to a few questions, and Jerry will provide you free assistance in comparing rates from more than 50 leading providers.
After changing the battery, is the Toyota key fob required to be reprogrammed?
A remote key fob needs to be associated with your vehicle particularly in order to be secure.
This stops people who drive the same make and model of automobile as you from using their remote to access your car. You’ll need to reprogram the fob if changing the batteries has erased this connection or if it was somehow disrupted in order for it to once again recognize your automobile.
Standard programming sequence
Your key fob can typically be reconfigured by following this typical procedure:
Instead of starting and then returning to the locked position, turn the key into the run position. Repeat this multiple times.
You’ll typically hear a chime or other sound when you’ve cycled the key enough times. At that point, you can push the lock or unlock button on your key fob to hear another chime.
O’Reilly does key fobs program?
The Art of Lock Picking is funded by its readers. We could receive an affiliate commission if you make a purchase using links on our website.
Over 20 million keys are typically lost by Americans each year! You know how frustrating it can be until you get a replacement key produced if you’ve ever lost the key to your house, apartment, car, motorcycle, or RV and didn’t have a spare. Since hiring a professional locksmith can occasionally be expensive, you might be wondering where else you can order keys.
Car keys of many kinds and models are produced by O’Reilly Auto Parts. They can configure your remote keyless entry system and transponder key as well as build and sell key fobs. The keys can be ordered online.
Since there are thousands of O’Reilly Auto Parts locations around the country, going there to get a key produced is quicker and easier than finding a locksmith. They have self-serve kiosks and provide key-cutting services. Discover what keys O’Reilly Auto Parts makes, sells, and how to order one by reading on.