How To Pair Phone To Toyota Highlander

Toyota / By

Drivers must develop ways to use mobile devices safely while operating a vehicle as staying connected at all times becomes the norm. With the help of tools like the Entune system, automakers have become more intelligent and improved their vehicles to meet drivers’ shifting technological needs. To make traveling with a smartphone in tow safer and more practical, our team at Hesser Toyota is offering advice on how to sync the iPhone with the Toyota Highlander Bluetooth.

Bluetooth pairing instructions for the iPhone

According to the Highlander Entune system:

  • Hit the HOME key.
  • Choose SETUP (found in the upper right corner of the display screen)
  • Choose BLUETOOTH
  • Select ADD

Using an iPhone:

  • Choose SETTINGS.
  • Click BLUETOOTH.
  • Set the Bluetooth toggle to “ON.”
  • Choose the Highlander system from the available devices.
  • Put in the PIN that is displayed on the Highlander’s Entune system.
  • Click PAIR/OK.

What does Bluetooth do?

Drivers can use Hands-Free Calling, Siri Eyes Free, and music streaming when they pair their devices with the Entune system’s Bluetooth. Without taking their eyes off the road or their hands off the steering wheel, drivers may use voice commands to make phone calls, stream music, or use their preferred iPhone features.

How can I make a phone connection to my 2018 Toyota Highlander?

  • Make sure your phone’s Bluetooth is turned on.
  • the Scan For Devices option
  • Push the Setup button on the screen in your car.
  • Select Bluetooth next.
  • the Add New Device button
  • Choose Make this System Findable.
  • When your phone sends you a pairing request, accept it.
  • The pairing of your device and vehicle will be verified by a confirmation.

Always launch the app on your phone first before using the system, and make sure your phone is plugged into the Entune App Suite. To accomplish this, select Setup from the menu, then Bluetooth, Paired Device List, your phone, then Connect. You should be aware that utilizing Entune requires using the internet, thus data charges may be necessary.

Be at ease! Come by and say hello! We are pleased to assist you in syncing your phone with your Toyota car. In Martinsburg, West Virginia, at 650 Foxcroft Avenue, we are easily accessible.

Soft Reset

The Toyota Entune multimedia system can be quickly and easily reset using the following technique:

  • Put your key in the ignition lock and turn it to the “On” position, or start the engine by pressing the Engine button twice.
  • Hold off till the multimedia screen turns on.
  • For 12 seconds, firmly press and hold the PWR-VOL knob.
  • Toyota Entune ought should restart and work normally.

Before moving on to more advanced techniques that will also remove part of your data, it is usually worthwhile to try this method first, even though it doesn’t always succeed. Alternately, attempt these:

  • While the engine is off, turn on the electrical systems.
  • Hold off till the Entune system turns on.
  • Take your phone, then un-sync Toyota with all of your other Bluetooth devices.
  • Go to Bluetooth connections on the Entune screen and take your phone out of the list of recognized devices.

Hard Reset

If the prior approach didn’t work, you must carry out the following actions:

  • Do not start the engine; instead, press the Engine button twice.
  • The multimedia system’s physical Apps button should be pressed and held. Turn the lights on and off three times without letting go. On the screen will come a selection called Diagnosis Check.
  • The screen’s INIT button should be pressed and held. You will receive a “Personal data is initialized” notification. OK? which will elicit a “Yes” from you.
  • Check to see whether all Bluetooth connections, radio stations, and phone calls have been disconnected before starting the engine.

The most effective way to guarantee a long-term, bug-free operation is to use this procedure, which wipes out all of the saved data and effectively returns Entune to factory default condition.

Software Reset

Using software commands solely is an alternative to the hard reset technique. Additionally, this may delete your data, so proceed with caution and back up any crucial information.

  • Without starting the engine, start the vehicle.
  • Remove Entune from any Bluetooth devices that are currently in use.
  • Similar to the first way, press and hold the PWR-VOL button for roughly 12 seconds.
  • Select the Setup menu on the display after the restart is finished.
  • Choose General from the menu.
  • Locate and click the Delete Personal Data button.
  • Check that everything is working properly by starting the car.

How come my phone and Toyota won’t connect?

The Bluetooth setting in the car might not be on. Go to the menu, setup, Bluetooth, detailed options, and make sure Bluetooth power is on to check this feature. Ensure that Bluetooth is enabled on your phone. You may do this in the settings of your phone.

How can I connect my 2017 Highlander to my phone?

  • Press the APPS or Home button on your Highlander Entune system, then choose Setup.
  • Select Bluetooth. If necessary, choose “Yes” to unplug an already-connected device.
  • Select Add.
  • On your Samsung Galaxy S7, go to the apps menu and choose Settings.
  • Make sure Bluetooth is turned on and select Bluetooth under Connections.
  • In the top right corner of the screen, click Scan.
  • You should hear the Highlander Entune system start up. Choose it.
  • If the passkey appears on your phone or the vehicle’s display screen, enter it and/or confirm it.

You have it now! You may now make use of various convenience features, such as hands-free calling, wireless music streaming, and text messaging, because your phone is now Bluetooth-connected to your Highlander. Consult your owner’s handbook for a potential solution if you experience problems when pairing your Samsung Galaxy S7 with your 2017 Toyota Highlander or using the capabilities that are offered. For assistance, you may also get in touch with our staff at Toyota Vacaville or your neighborhood Toyota dealer.

How can I pair my phone with the Bluetooth on my Toyota?

How to Install Bluetooth in a Toyota

  • Make sure your mobile device has Bluetooth turned on.
  • Open the Menu menu on your Entune multimedia system, choose Setup, and then select Bluetooth.
  • Choose your Toyota Entune system from the Bluetooth menu on your mobile device.
  • The Toyota Entune system and your mobile device are now Bluetooth-enabled.

My 2012 Toyota Highlander has a Bluetooth gadget, how can I get rid of it?

Remove a gadget:

  • From the Home screen, click SETTINGS.
  • Choose DEVICES.
  • Choose Bluetooth and activate the setting.
  • Choose the device number you want to remove.
  • Choose Repair This Device should be unpaired.
  • Choose Yes.

Has the 2012 Highlander Bluetooth?

2012 Toyota Highlander Limited with a variety of options is the vehicle we’re testing. We are a little bummed that the base Highlander, which starts at more over $28,000, lacks Bluetooth or normal iPod/USB connection.