Use the trunk release lever on the driver’s side of your Toyota Corolla to open the trunk quickly and easily. Use a slim jim to get into your automobile if you’ve locked yourself out of the cabin as well. You can also call a locksmith.
In This Article...
Without a key, how do you open a Toyota trunk?
If you try this procedure on your own, there’s a risk you won’t be able to put everything back in its proper place, so be sure to follow the instructions and watch the instructional video first. When your Camry’s doors can be unlocked but the alarm system prohibits you from opening the trunk and your keys are inside, it still functions.
- On the driver’s door, find the plastic plug. When the door is closed, it is level with the handle and faces the B-Column. Remove it, then store it securely.
- Peer through the gap.
- Inside is a Torx head screw. Locate the right size Torx screwdriver, then remove the screw. Although there are safeguards in place to stop the screw from hitting the door, proceed with caution just in case.
- To get to the key cylinder, pull the door handle. The key cylinder must be removed from the socket, however doing so can be challenging due to how tightly it fits. Avoid breaking off the handle or scratching the paint. As a temporary layer of security, some masking tape will be fantastic.
- The cylinder head will emerge facing the car’s rear. Once you’ve opened the trunk, you won’t be able to put it back in any other way, so keep this in mind.
- Take a look at the key cylinder’s tip. The plus-shaped lock mechanism will be visible. When you look inside the cylinder slot, you will see a plus-shaped indentation where the cylinder should fit.
- Carefully place a flathead screwdriver into the cylinder slot. Rotate it to lock the car and then to unlock it once it is positioned inside the plus-shaped indentation.
- When you push the trunk release button, the trunk instantly opens!
It is far more difficult to put the cylinder lock back in place than it was to remove it. Let’s follow the procedures to put the door back in working order.
- Slide the cylinder back in from the same angle it was inserted by raising the door handle. Take your time, be gentle, and avoid using forcethis will involve plenty of twisting, pivoting, and turning.
- Insert the key, turn it, then gradually apply pressure to the cylinder until it is facing the proper direction and the door handle can slide onto it. The cylinder should then automatically fall into position.
- Tighten the Torx screw while the key is still within the lock. If the screw isn’t holding, you’ll use the key to wriggle it into place until it does, causing everything to settle into its proper position.
- After replacing the plastic stopper, the procedure is complete.
Without a key, how do you open a trunk from the outside?
Oops! Fortunately, as long as that isn’t locked, too, you can use the trunk release button or lever inside your car to open the trunk without a key.
The best approach to open the trunk if you’ve completely locked yourself out of the car is still through the cabin. To open your automobile door, you have two options: call a locksmith or use a slim jim.
Most auto parts stores sell slim jims, often known as lock picks. To utilize it to retrieve your keys from the trunk, follow these steps:
- Between the window and the window trim, press the pick down.
- With the pick, search the area for a rod.
- The automobile door should then open after using the pick to raise the rod.
- Now look inside your car for the lever or button that releases the trunk.
- To unlock the trunk, push or pull the lock.
Therefore, you have a few options if you’ve locked your keys in the trunk. If you’re locked out of the trunk as well, you can either use a slim jim by following the methods above, call roadside help, or open the trunk using the trunk release button or lever in the cabin.
If you have a history of bad luck, Jerry’s roadside assistance membership can help you avoid the hassle of auto accidents. For just $6.99 a month, Jerry joins with Urgently to offer you the best roadside assistance available, including features like towing, lockout service, and a mechanics hotline.
What should I do if my car’s trunk locks my keys inside?
Request a locksmith The Pop-a-Lock team can quickly unlock the lock for you whether you’ve locked your keys in the trunk or the car’s cabin. Being in a scenario where you need your car keys but they are not available might be unpleasant.
Where is the release for the trunk?
Pushing the Trunk Release button from inside the car will open the trunk lid. To the left of the steering wheel on the instrument panel, there is a button. NOTE: For the button to function, the transmission must be in PARK.
Without a key, how do you open a 2016 Toyota Corolla?
Oh, no! Being locked out of your keys is never fun. Fortunately, a coathanger will work to unlock a Toyota automobile door.
If you can afford it, call a locksmith rather than risking damage to your car. However, if you insist on trying to open your car manually, try this:
- On the front drivers side of your Camry, insert a flathead screwdriver wrapped in a towel or a tiny wedge into the gap between the door and the frame.
- Pry the door open a bit with the screwdriver. Be very careful when doing this to avoid accidently damaging the frame’s structural integrity or your car’s locking system.
- To keep the door open, use a wedge or another screwdriver.
- In the space between the door and the frame, insert a wire coathanger (or another long, strong wire).
- With the coathanger, depress the car’s unlock button.
- Open the door after carefully removing the wedges and the coathanger.
Without a remote, how can a trunk be opened?
How can the trunk be opened without the key or remote?
- Find the trunk release lever.
- Toggle the switch. Trunk should release its latch.
- Unlock the trunk.
When your battery is dead, how do you open a trunk?
On the driver’s door, depress the trunk release button. The trunk can be opened in one of four ways: When the remote is within keyless Access functioning range and the doors are locked, press the boot release button on the boot lid. Put pressure on the trunk lid to close it.
Why doesn’t the button on my trunk work?
When you press the inside trunk release button on the fob or the trunk lock actuator and nothing happens, this is another common clue that there is a problem. This could be a sign of a problem with the vehicle’s battery or with the electronics connecting to the actuator, such as a shorted fuse or wire. Since there are numerous potential issues that could result in this problem, it is recommended to get in touch with a nearby mechanic so they can accurately diagnose and resolve the problem as soon as possible.
A trunk lock can you pick?
I’m sorry you locked your keys in the trunk, but there isn’t a reliable way to open a car trunk lock without causing harm to the automobile. To reach the trunk, you should either call a locksmith or open a different door.
You can pry the lock open with a screwdriver if you don’t mind causing damage or replacing the lock. You may also use a slim jim, which you can get from most auto parts stores.
With a slim jim, access the trunk as follows:
- Swipe the slim jim’s hook end between the trim at the handle and the passenger-side glass.
- Find the lock rod that joins the handle to the locking mechanism by feeling around.
- Pull up while securing the thin jim to the rod. The door ought to be unlocked after you hear a click.
- Alternately, you can fold down the back seats and use the emergency release lever to open the trunk by unlocking the other doors and opening it normally.
Remember that not all vehicles can be repaired with slim jims, and even if they can, you risk damaging the vehicle. The best way to open the trunk is typically to hire a locksmith, and if your automobile insurance includes towing and labor coverage, the visit might even be paid for.
Finally, utilize Jerry, a free insurance comparison app that shops for low costs with more than 50 different insurance companies, to discover an insurance policy that includes towing and labor coverage or just to make sure you’re not overpaying for coverage. You may make adjustments at any time, receive prices instantly, and text an agent with any queries you may have.
Can I lock my key fob in my car?
The key fob can be locked inside a car, so the answer is yes. If you need to keep the key fob in the vehicle to prevent theft or damage, you can do this on purpose. It’s also possible for your key fob to inadvertently lock itself inside the vehicle. There are numerous techniques to resolve accidental lockouts.
How do I open my car if the key fob is locked inside?
There are three main ways to get your key fob out of a locked car. You can shift the functional key in the direction of a sensor, tinker with the inside door switches or buttons, or contact a locksmith. If you don’t have the necessary tools or time to complete the job yourself, call a locksmith.
What tools can I use to open a locked car with the key fob inside?
The most adaptable item to use when your key fob becomes trapped in your automobile is a piece of thin, bending metal. Historically, the preferred DIY tool has been an unwound wire hanger. If you use a locksmith’s auto lockout service, they will have the right equipment and there won’t be any chance of the car getting damaged.
Is a locksmith able to open a car with the key fob locked inside?
There are some automotive locksmiths who specialize in unlocking locked vehicles. These locksmiths are knowledgeable about numerous makes and models’ security features and bypasses. Additionally, they have sufficient expertise to guarantee that opening the door won’t damage the car.